Charbroil Grill Parts

CharBroil Gas Grill
Parts Listing by Category


View Shopping Cart

CharBroil Grill Parts: 16-3/4" X 24" Porcelain Coated Rod Cooking Grate Set

16-3/4" X 24" Porcelain Coated Rod Cooking Grate Set - Heavy duty porcelain coated steel rod cooking grate set. Set contains two sections each measuring 16-3/4" front to back X 12" or a total measurement of 16-3/4" X 24".
Our Item # 80000293
Price: $49.75

* Availability Notice *
We are currently out of stock on this item and although these items are on order we have been informed that they will not be available until 4/18/2014. All orders including this item will be held until they can ship complete.

Page instructions: Click on any part description for photo, additional part detail and ordering.
Or, Click Here to find or determine your model and narrow the list on our Char-broil grill parts home page.

Burner Assemblies
  1. Adjustable Precision Flame Burner Re-build Kit
    Replacement burner system universal to 7000,8000,9000 Precision Flame Grills. Includes: Drip Vaporizer Bar, Burner, Briquet Plate, Ignitor Electrode and wire, Hardware, and complete instructions.
  2. Patio Caddie Burner
    Patio Caddie Burner. The total length of this burner is 12" roughly measured along the outside.
  3. Eleven Inch Ignitor Wire
    Ignitor wire with one round connector and one flat spade connector. Measure 11 inches long.
  4. 7000 Series 17 Inch Bar Burner Assembly (1999 - 2006)
    Top ported 2-1/4" X 17" stainless burner with ignitor collector box and electrode. Venturi tube spacing is 2-3/8" center to center and tube reach is 6-1/4". Tube drop meaures 2".
  5. Precision Flame 9000 Tube Burner and Shield
    "U" Shaped tube burner, 30 1/2" inches total length from the top of the "U" to the tube ends. Includes burner shield, support bracket with mounting hardware. (Ignitor compomponents NLA for this burner. See adjustable burner if ignitor is required)
  6. Precision Flame 8000 Tube Burner and Shield
    "U" Shaped burner, 29-1/4" inches total length from the top of the "U" to the tube ends. Includes burner shield, support bracket with mounting hardware. (Ignitor compomponents NLA for this burner. See adjustable burner if ignitor is required)
  7. "Big Easy" Dual (2-Burner) Assembly
    "Big Easy" two burner rebuild kit. For Big Easy grills that use two main burners. Includes the two main burners with electrode ignitor component mounted, connecting flash tube and the push nuts. Assembly required.
  8. "Big Easy" Triple (3-Burner) Assembly
    "Big Easy" three burner rebuild kit. For Big Easy grills that use three main burners. Includes the three main burners with electrode ignitor component mounted, two connecting flash tubes and the push nuts. Assembly required.
  9. Masterflame 5000/6000 Series MF2 Bar Burner Assembly
    Top ported Masterflame 2-1/4" X 17" stainless burner assembly. Venturi tube spacing is 2-3/8" center to center and tube reach is 4-3/4". Fits 1999 to present 5000/6000 models. Ships as shown which includes ignitor collector box and electrode.
  10. Cast Iron Paddle Shaped Burner
    Cast iron paddle shaped burner. Measures approximately 3-1/2" wide by 13-3/4" total length including the gas tube. Fits Char-Broil Advantage and Performance Series grills. Exact substitute for stainless 7000083 burner. Now includes igniter electrode.
  11. Stainless Steel Burner Paddle Shaped Burner
    Stainless steel paddle shaped burner. Measures approximately 3-1/2" wide by 13-3/4" total length including the gas tube. Fits Char-Broil Advantage and Performance Series grills.
  12. 17-3/8" Burner Ignition Carryover Bracket
    Fits 360 series three-burner models. MEASURE TO ASSURE CORRECT FIT. The purpose of the bracket is to carry gas across and ignite the adjacent burners. Bracket length is 17-3/8". (Burners not included and shown for display only.)
  13. 19-1/4" Burner Ignition Carryover Bracket
    Fits 390 series three-burner models. MEASURE TO ASSURE CORRECT FIT. The purpose of the bracket is to carry gas across and ignite the adjacent burners. Bracket length is 19-1/4". (Burners not included and shown for display only.)
  14. 25-1/4" Burner Ignition Carryover Bracket
    Fits 480 series four-burner models. MEASURE TO ASSURE CORRECT FIT. The purpose of the bracket is to carry gas across and ignite the adjacent burners. Bracket length is 25-1/4". (Burners not included and shown for display only.)
  15. Adjustable Burner Support Bracket With Carryover Tubes
    Porcelain coated burner bracket with stainless steel carryover tubes for the three burner grills. Adjusts 23-1/2" to 25". (Burner shown is not included but shown as an example) Fits burners up to 2-5/8" wide.
  16. 13-3/4" Cast Iron Bar Burner
    Heavy duty cast iron replacement burner. Burner dimensions are 2-1/4" wide X 13-3/4" including the bottom side venturi tube length. Includes pin clip.
  17. 6-3/4 Inch Burner Carryover Tube
    The flash tube mounts between the burners to carry flame and ignition over to the adjacent burner. (Burners are not included and are shown for display purposes. Flash tube length is 6-3/4" not including screw tabs. Screws included.
  18. 15-7/8 Inch Stainless Steel Tube Burner
    Stainless steel tube burner. Burner total length is 15-7/8". Narrow end which connects to the valve includes wire mesh spider guards.
  19. 4-3/4 Inch Burner Carry-Over Tube
    The flash tube mounts between the burners to carry flame and ignition over to the adjacent burner. (Burners are not included and are shown for display purposes. Flash tube length is 4-3/4" not including screw tabs. Screws included.
  20. Stainless Steel Charbroil TEC Tube Burner
    Stainless steel burner for Charbroil TEC Series replaces old brass burner. Burner measures 15-7/8" long and includes a spider guard screen at the valve end. Also features an air adjustment screw at the burner center near the valve end.
  21. Burner assembly for Select Series 2-Control Grills
    Stainless steel oval burner. Burner dimensions are 3-7/8" X 13-1/2". Gas tubes measure 3-1/2" down to the center of the perpendicular tube and reach out 7-1/2". Tube spacing is 3" center to center. Includes collector box and electrode.
  22. Burner assembly for Select Series 4-Control Grills
    Stainless steel oval burner. Burner dimensions are 3-7/8" X 10-3/4". Gas tubes measure 3-1/2" down to the center of the perpendicular tube and reach out 9". Tube spacing is 2-3/4" center to center. Ignitor component (80011620) sold separately.
  23. Charbroil RED 9" Burner With 3-1/8" Center Tube
    Stainless steel burner assembly. Burner measures 9" long and the center gas supply tube drops down 3-1/8". More than one required and sold by each.
  24. Charbroil RED 7-1/2" Burner With 3" Center Tube
    Stainless steel burner assembly. Burner measures 7-1/2" long and the center gas supply tube drops down 3". More than one required and sold by each.
  25. Masterflame 8000/9000 Burner Assembly With 3" Tube Spacing
    Bottom ported Masterflame 3-5/8" X 22-1/4" stainless burner assembly. Tube spacing is 3" tube center to tube center. Venturi tubes assemble with screws and gaskets. This is a substitute part, original equipment no longer available. (Shown assembled.)
  26. Masterflame 8000/9000 Burner Assembly With 2-3/8" Tube Spacing
    Top ported Masterflame 3-5/8" X 22-1/4" stainless burner assembly. Venturi tubes are permanently mounted and tube spacing is 2-3/8" center to center. Fits 1999 to present 8000/9000 models.
  27. Masterflame 7000 Series MF1 Bar Burner Assembly
    Bottom ported Masterflame 2-1/4" X 17" stainless burner assembly. Venturi tube spacing is 3" center to center and tube reach is 6". Fits 1998 and earlier 7000 models. Minor assembly required.
  28. Masterflame 5000/6000 Series MF1 Bar Burner Assembly
    Top ported Masterflame 2-1/4" X 17" stainless burner assembly. Venturi tube spacing is 3" center to center and tube reach is 4-3/4". Fits 1998 and earlier 5000/6000 models.
  29. Charbroil RED 9" Burner With 2-1/8" Center Tube
    Stainless steel burner assembly. Burner measures 9" long and the center gas supply tube drops down 2-1/8". More than one required and sold by each.
  30. Charbroil RED 8" Burner Assembly
    Stainless steel Char-Broil RED burner assembly. Burner measures 8-1/8" long. More than one required and sold by each.
  31. 15-1/4" Cast Iron "Round Oval" Burner
    Cast iron burner. Porcelain coated flat finish. Fits Commercial Series grills manufactured in 2002 - 2003. Burner length including venturi tube 15-1/4". Width 3-1/2".
  32. Aftermarket Replica Cooking Zone 1000 Burner and Drip Shield Kit
    (The original equipment burner is no longer available.) Includes burner shields which are permanently welded on the burner. Burner measures 26" x 7". Stainless steel. Please note that this burner will not accept ignitor components.
Burner Briquet Holders
  1. 7000/8000/9000 Briquet Rack
    Briquet holder for Charbroil 7000, 8000 and 9000 series models. This is the light gauge rack that mounts under the burner and holds the ceramic briquettes. Dimensions are 5-3/4" front to back X 20-1/4" wide.
Burner Shields
  1. Electric Patio Caddie Aluminum Top Insert
    Top aluminum insert for electric Patio Caddie models. Diameter is 15 1/2".

    * We are discontinuing this item. Available while supply lasts.

  2. Big Easy Burner Tent Support
    Support assembly for the Big Easy burner tent. Holds the 6" X 6" burner tent over the burner. More than one required.
  3. 5000 Series Narrow Burner Shield - Drip Vaporiser Bar
    Stainless steel tent shaped drip vaporiser bar, fits Masterflame 5000 Series gas grills. 19-1/4 inches long x 2-1/2 inches wide.
  4. 7000 Series Burner Shield - Drip Vaporiser Bar
    Stainless steel tent shaped drip vaporiser bar, fits Masterflame 7000 Series gas grills. 23-1/2 inches long x 2-9/16 inches wide.
  5. 26-1/4" 8000 Series Traditional Style Burner Shield Drip Vaporiser Bar
    Stainless steel tent shaped drip vaporiser bar, fits Masterflame 8000 Series gas grills. 26-1/4 inches long x 4 inches wide.
  6. 6000 Series Burner Shield - Drip Vaporiser Bar
    Stainless steel tent shaped drip vaporiser bar, fits Masterflame 6000 Series gas grills. 21-1/2 inches long x 2-1/8 inches wide.
  7. 9000 Series Burner Shield - Drip Vaporiser Bar
    Stainless steel tent shaped drip vaporiser bar. Fits Masterflame 9000 Series gas grills. 29-5/16 inches long x 4-1/4 inches wide.
  8. Patio Caddie Burner Shield - Heat Distribution Plate
    Round cast iron circular plate which sets over the burner flame. Mounting hardware sold separately. Instructions
  9. Big Easy Burner Tent
    Burner tent for Char-broil "Big Easy" model grills. Stamped steel vented tent measures 6" X 6". Sold individually, more than one required.
  10. 7000 Series Wide Vented Burner Shield Drip-Vaporiser Bar
    7000 Series cooking system drip vaporizer bar. 409 Stainless steel 20 guage. Dimensions 23-1/2" X 6-1/2" Wide. The briquet rack under the burner is not required with grills using this bar.
  11. 26-1/4" 8000 Series Modular Style Burner Shield Drip Vaporiser Bar
    Quickset 8000 Series vaporizer bar. 409 Stainless steel 20 guage. 26" X 6-1/2"
  12. Advantage and Performance Series Heat Tent
    Vented type burner tent drip vaporizer shield. Stainless steel construction. Dimensions are 5-3/4" wide by 11-3/4" long. Sold individually, more than one required. Fits Advantage and Performance Series grills.
  13. 4-1/4" X 15" Flame Tamer
    Stainless steel vented burner shield or "Flame Tamer". Measures 4-1/4" width X 15" front to back (measurement includes tabs). For easier measurement we measure the width from edge to edge with the shield upside down.
  14. 4-1/2" X 16-1/4" Flame Tamer
    Burner shield or "Flame Tamer". Stainless steel. Measures 4-1/2" width X 16-1/4" front to back. For easier measurement we measure the width from edge to edge with the shield upside down.
  15. 17" X 3-7/8" Flame Tamer Burner Shield
    Black porcelain coated burner shield. Measures 17" long X 3-7/8" across the bottom.
  16. 3-3/4" X 16" Flame Tamer
    Burner shield or "Flame Tamer". Porcelain coated. Measures 3-3/4" width X 16" front to back. For easier measurement we measure the width from edge to edge with the shield upside down.
  17. 9-1/2" Wide Trough With Square Legs (60/40 Split)
    Charbroil RED Radiant trough. This is the smaller right side pan. Measures 9-1/2" wide X 17-3/8" front to back and 4-5/8" deep(measured from the side edge). *this trough has square legs and goes with trough #80007880 only.
  18. 15-7/8" Wide Trough With Square Legs (50/50 Split)
    This Char-broil RED radiant trough measures 15-7/8" wide X 17-3/8" front to back and 4-3/4" deep. (Depth is measured from side lip). This trough is used on some models where the two troughs are the same size offering a 50/50 split.
  19. 18-3/4" Wide Trough With Square Legs (60/40 Split)
    This Char-broil RED radiant trough measures 18-3/4" wide X 17-1/4" front to back and 4-5/8" deep(measured from the side edge). This is the larger of the two troughs and is on the left side facing the grill. *goes with trough #80007859 only.
  20. Infrared Trough Support Bar
    Char-Broil RED trough dividing and support bar. Bar sets between right and left troughs. Measures 3/4" wide X 17" front to back.
  21. 14-5/8" X 4-1/2" Flame Tamer
    Porcelain coated steel flame tamer. Dimensions are 14-5/8" X 4-1/2". Char-Broil original equipment part.
  22. 27" Select Series Heat Tent
    Porcelain coated steel heat tent for Select Series four control grills. Tent measures 27" X 6-1/4".
  23. 18-1/4" Select Series Heat Tent
    Porcelain coated steel heat tent for Select Series two control grills. Tent measures 18-1/4" X 6-1/4".
  24. Wide Porcelain Coated Heat Tent
    Porcelain coated steel vaproizer bar. Measures 6-1/4" X 23-3/4".
  25. 17-1/4" Wide Trough With Round Legs (Full Width No Split)
    Char-Broil "Urban RED" radiant trough. Used on some smaller models using a single trough. Measures 17-1/4" X 17-1/4" square, 4-3/4" deep (measured from side lip edge)
  26. 18-3/4" Wide Trough With Round Legs (60/40 Split)
    This is the larger of the two troughs and is on the left side facing the grill. 17-3/8" front to back by 18-3/4" wide and 4-5/8" deep(measured from side edge). This is the newer style trough with round peg legs. *goes with trough #G511-4700-W1 only.
  27. 9-1/2" Wide Trough With Round Legs (60/40 Split)
    Charbroil Radiant trough. This is the smaller right side pan. Measures 9-1/2" wide X 17-3/8" front to back and 4-5/8" deep(measured from the side edge). Differs from the older 9-1/2" trough, 80007859, in that it has round legs. *goes with trough #G511-4600-W1 only.
  28. 25-3/4" Wide Trough With Round Legs (Full Width No Split)
    Char-Broil RED radiant trough. Used on some models using a single trough. Measures 17-3/4" front to back X 25-3/4" wide. The trough is 4-5/8" deep(measured from the side edge) and has round peg type legs.
  29. 26-1/4 Infrared Radiant Trough
    Char-Broil infrared radiant trough. Used as a single, one piece trough. Measures 17-1/4" front to back X 26-1/4" wide and 3" deep(measured from side edge). Trough has extended supports on the front and back sides.
  30. 14-7/8" Wide Trough With Round Legs (50/50 Split)
    This Char-broil RED radiant trough measures 14-7/8" wide X 17-3/8" front to back and 4-5/8" deep (measured from the side edge). This trough was used on some models where the two troughs are the same size offering a 50/50 split.
Cooking Grids - Cast Iron
  1. 8000 Series Cast Iron Cooking Grate Set
    8000 Series raw (uncoated) cast iron cook grate set. 60/40 split, one section measuring 14-3/4" X 14-3/4" and the other 14-3/4" X 11-3/4". Coat with vegetable oil to season and seal grates before cooking.
  2. 26-1/4" 2-Piece Matte Finish Cast Iron Cooking Grate Set
    Heavy duty 2 piece, matte finish cast iron cook grate set. Each grate measures 18-1/2" front to back X 13-1/8" wide. Total measurement is 18-1/2" X 26-1/4".
  3. 16-3/4" X 24" Stainless Steel Clad Cooking Grate Set
    Cooking grate set features stainless steel hollow rod. Each section measures 16-3/4" X 12" for a total measurement of 16-3/4" X 24".
  4. 18-5/8" X 32" 3-Piece Porcelain Coated Rod Cooking Grate Set
    Heavy duty porcelain coated rod three piece cooking grate set. Each section measures 18-5/8" X 10-3/8". The total combined cooking surface measures 18-5/8" X 32". (This is a factory substitute for the rolled stainless steel set.)
  5. Infrared 30-1/2" Wide 4-Section Cooking Grate And Emitter Set
    Stainless steel cooking grate and tray (emitter) set. Set includes 4 grates and 4 trays. Individual measurements of the sections are 7-5/8" wide X 18-1/4" front to back. Total width (measured at the trays) is 30-1/2" wide X 18-1/4" front to back.
  6. Infrared 26-1/4" Wide 3-Section Cooking Grate And Emitter Set
    Stainless steel cooking grate and tray (emitter) set. Set includes 3 grates and 3 trays. Individual measurements of the sections are 8-3/4" wide X 18-3/8" front to back. Total width (measured at the trays) is 26-1/4" wide X 18-3/8" front to back.
  7. Infrared 30-1/2" Wide 4-Section Slotted Stamped Stainless Cooking Grate Set
    Stamped stainless steel cooking grate set. Set includes 4 grates. Individual measurements of the sections are 7-3/4" wide X 18-7/16" front to back. Total width is 30-1/2" wide X 18-7/16" front to back.
Cooking Grids - Porcelain Coated Rod
  1. Weber 18" Grill Brush
    Long handled 18" grill brush keeps your hand away from hot cooking surfaces. Hardwood handle with wide cleaning head. Stainless steel bristles.
  2. Patio Caddie Cooking Grate
    Porcelain coated Patio Caddie cooking grate. 15" Diameter.

    *Note: This cooking grate does not fit the more current Patio Bistro model.

  3. 6000 Series Porcelain Coated Cooking Grid
    Heavy duty porcelain coated cooking grid. One piece, dimensions 11-7/8" W X 22-1/8" L for 6000 Series Grills. (The corners on the cooking grid are square not curved.)
  4. 7000 Series Porcelain Coated Cooking Grid
    Heavy duty porcelain coated cooking grid. One piece, dimensions 14" W X 24" L for 7000 Series Grills.
  5. 5000 Series Chrome Wire Cooking Grid
    Charbroil 5000 chrome wire coated cooking grid. Size 11 1/4" W X 19 1/2" L.
  6. 8000 Series Porcelain Coated Cooking Grid
    Heavy duty porcelain coated cooking grid. One piece, dimensions 14-3/4" W X 26-1/2" L for 8000 Series Grills.
  7. 7000 Series Dual Warming Rack Set - Top and Bottom Tiers
    7000 Series Dual Warming Rack Set. Top tier surface dimensions are 8-1/2" X 20-3/4" and pivot rod length is 26". Bottom tier surface dimensions are 10-1/2" X 23-1/2" and pivot rod length is 27-1/8".
  8. 15" x 24" Porcelain Coated 2 Piece Cooking Grate Set
    Heavy duty, 2 piece porcelain coated steel rod, cooking grate set. Each piece measures 12" wide X 15" front to back, for a total width of 24". Fits some Charbroil "Advantage Series" models.
  9. 15" x 32" Porcelain Coated 3 Piece Cooking Grate Set
    Heavy duty, 3 piece porcelain coated steel rod, cooking grate set. The 2 outer pieces measure 12" wide X 15" front to back and the center piece measures 8" wide X 15" front to back for a total width of 32". Fits some Charbroil "Advantage Series" models.
  10. 16-3/4" X 24" Stainless Steel Clad Cooking Grate Set
    Cooking grate set features stainless steel hollow rod. Each section measures 16-3/4" X 12" for a total measurement of 16-3/4" X 24".
  11. 28-1/2" Wide Cast Iron Cooking Grate Set
    Cast iron two section cooking grid set. Each section measures 13-3/4" front to back X 14-1/4" wide. Combined total width is 28-1/2".
  12. 19-3/4" Porcelain Coated Cooking Grid
    Black porcelain coated cooking grid. Measures 13-3/4" front to back by 19-3/4" wide. Grid features rounded corners.
Electrodes, Ignitor Components
  1. Big Easy Main Ignitor Wire
    Big Easy main ignitor wire. 15" long with round connector at wire end and flat connector at ceramic end.
  2. Single Pole Snap-In Ignitor Push Button
    Snap-In ignitor push button for units without side burners. (Single pole. Uses one wire.) Wire not included.
  3. Double Pole Snap-In Ignitor Push Button
    Snap-in 2 pole pushbutton for units with sideburners.Uses two wires. One connects at bottom with a round connector and the other at the side with a flat connector.
  4. Eleven Inch Ignitor Wire
    Ignitor wire with one round connector and one flat spade connector. Measure 11 inches long.
  5. Patio Caddie Ignitor Wire
    Patio Caddie igniter wire. Measures 11" long and has round connectors on each end. (Simply apply a little force, to fit the round connector onto the flat electrode connection.)
  6. Patio Caddie Ignitor Electrode
    Patio Caddie Ignitor Electrode. Mounts directly through the Caddie bottom and the electrode tip strikes off of the heat distribution plate.
  7. Masterflame MF2 Ignitor Kit
    Includes the twist and lock collector box, electrode, mounting screw and connector wire. Used on 1999 and newer Masterflame burners. Instructions
  8. Paddle Burner Ignitor Electrode
    Ignition electrode with mounting nut. Electrode tip has double bend to align with burner porthole. Electrode extends into the grill 2" and the total length is 3-1/4".
  9. Electronic Ignitor Replacement Kit
    Ignitor Replacement Kit. Includes Electric Spark Generator, Push button, Electrodes, and Wires. Note: the battery is not included.
  10. Electronic Ignitor Twist-On Push Button
    Rubber and chrome plastic finish push button. Twists onto the spark generator and locks into place when replacing the battery.
  11. 2-Port Electronic Ignitor Spark Generator
    Universal 2-pole electronic spark generator (where there are two wire connections on the back side). Uses one AAA battery (not included). Requires a 3/4" or 13/16" mounting hole. Clear epoxy encapsulated coil.
  12. 4-Port Electronic Ignitor Pack
    Electronic ignitor pack includes 4-connector electronic spark generator with push button, 2 electrodes, 2 electrode covers and wires. (Factory substitue for 80001219)
  13. Commercial Series Electronic Ignition Kit
    Electronic ignition kit for some Commercial Series models. Includes 2-pole electronic spark generator, side-burner electrode, 4" main burner electrode with wire, and 38" connecting wire.
  14. Front Avenue 2 Port Electronic Ignition Kit
    Electronic ignition kit includes electrodes, wire, push button cap and electronic spark generator component with two connections.
  15. 4 Output Electronic Ignition Module With Chrome Battery Cap
    4 output-connector, electronic ignition module with chrome plastic battery cap. Features 2 input terminals on the back for the ignition switch. Requires a AA battery(not included).
  16. Ignitor Collector Box and Electrode Component
    Select Series burner ignitor collector box and electrode with wire assembly. Fits both 2-control and 4-control burners. Screws included. Collector box shown bottom left. Top and bottom right are mounting views.
  17. Ignitor Electrode With 24" Wire
    Ignitor electrode with mounting clip and molded in wire. Electrode tip bends at a 90 degree angle. Wire length is 24".
  18. Flush Mount Ignitor Switch Button
    Ignitor push button switch. Includes two 26" long connecting wires with female spade connector ends. This is the switch and wires only. Does not include the electronic ignition module.
  19. Black Plastic Battery Cap With Spring
    Black plastic battery cap with internal spring for the ignition module. Measures 1-1/4" at the base.
  20. Ignitor 4-Port Electronic Spark Generator
    Electronic spark generator with four wire connection tabs on the rear. Chrome look plastic push button. Use AA battery not included.
  21. Charbroil Commercial Series Ignitor Collector Box and Electrode
    Collector box and electrode assembly. Includes locking nuts and washer. Total component length is 4". Sold individually, more than one may be required.
  22. Double Pole Rotary Spark Generator And Knob
    Rotary spark generator with knob and screws. Double pole generator uses two wires. Knob snaps and locks onto generator shaft.
Front Avenue
  1. 13-3/4" Cast Iron Bar Burner
    Heavy duty cast iron replacement burner. Burner dimensions are 2-1/4" wide X 13-3/4" including the bottom side venturi tube length. Includes pin clip.
Grease Drip Collector Cups
  1. "Grease Catcher" Hanger Wire and Cup
    Aluminum grease catcher cup which hangs under the grill to catch excess drippings. Includes hanger which threads through the drip hole in the bottom of the casting
  2. 13-3/4" Grill Bottom Clean Out Tray
    Anodized steel, slide out grill bottom tray. Measures 8-1/2" X 13-3/4". There are two tracks under the drain hole which hold the rectangular grease cup. (The grease cup is not included.)
  3. 21-1/2" Grill Bottom Clean Out Tray
    Anodized steel, slide out grill bottom tray. Measures 8-1/2" X 21-1/2". There are two tracks under the drain hole which hold the rectangular grease cup. (The grease cup is not included.)
  4. Rectangular Slide On Grease Catcher Cup
    The grease catcher cup slides onto the two tracks under the clean out pan. Cup measures 4" X 6" not including the handle. Black powder coated finish.
Handles and Knobs
  1. Patio Caddie Top Lid Handle
    Charbroil Patio Caddie lid handle. PLEASE NOTE: No hardware included.
  2. Charbroil Masterflame Model Control Knob Set
    Set of 2 control knobs. Fits Masterflame series. Knobs are 1-3/4" in diameter.
  3. Large 17-1/8" Crescent Shaped Handle
    Large curved black handle with mounting holes measuring 14-1/2" center to center. The handle measures 17-1/8" side to side and stands out from the grill 4".
  4. Dome Shaped Control Knob
    Black dome shaped control knob for a variety of Performance and Advantage Series models. Measures 2-3/8" in diameter.
  5. Control Knob Bezel
    Control knob bezel with center hole and slotted mounting hole located directly above center. Bezel is 2-7/8" in diameter.
  6. 2-3/8" Round Temperature Guage
    Silver temperature guage. Reads 150 - 650 degrees. Includes wing nut for mounting. Measures 2-3/8" in diameter. Temperature probe is 2-1/4" in length.
  7. Electronic Ignition Push Button
    Electronic ignition plastic push button. Inside spring is included.
  8. Chrome Temperature Guage Bezel
    Temperature guage bezel with single round hole in the center. Measures 3-1/2" in diameter.
  9. Chrome Plastic Control Knob
    Black plastic control knob with chrome top. Factory substitute for chrome knob with black plastic detail. Measures 2" in diameter.
Hose, Valves and Regulators
  1. Full Size Propane Tank Adapter Hose
    Adapter hose allows the use of a full size propane bottle to be used with your Grill-2-Go. 6 feet long.
  2. Hose Regulator Assembly With Type I Tank Fitting
    Replacement hose regulator assembly. Regulator is set up with new style black hand nut fitting for tanks using this common connector. Hose has a male pipe fitting which attaches directly to the gas manifold. Hose length 22" long.
  3. THIS PART HAS BEEN DISCONTINUED. Grill-2-Go Express Hose Regulator Assembly
    Hose and gas regulator assembly for the Grill 2 Go Express model.
Warming Racks - 1st Tier
  1. 5000 Series Warming Rack - Bottom Tier
    Swing away warming rack for Charbroil 5000 Series Grills, 20 X 7
  2. 7000 Series Warming Rack - Bottom Tier
    Standing legs bend outward and attach through the sides of the grill bottom. Bottom warming rack for 7000 Series models using either single or multi-tiered warming rack systems. Surface dimensions are 10-1/2" X 23-1/2". Pivot rod length 27-1/8".
  3. 26-1/4" Select Series Warming Rack
    Chrome plated swing-away warming rack. Surface dimensions are 10-1/2" X 26-1/4". Pivot rod length (the rod section that mounts through the holes in the lid) is 29-3/4".
  4. 18-1/4" Select Series Warming Rack
    Chrome plated swing-away warming rack. Surface dimensions are 7-1/4" X 18-1/4". Pivot rod length (the rod section that mounts through the holes in the lid) is 21".
  5. 8000 Series Warming Rack - Bottom Tier
    Standing legs bend outward and attach through the sides of the grill bottom. Bottom warming rack for 8000 Series models using either single or multi-tiered warming rack systems. Surface dimensions 10 1/2" X 26 1/4". Pivot rod length 29-3/4".
Warming Racks - Sets
  1. 7000 Series Dual Warming Rack Set - Top and Bottom Tiers
    7000 Series Dual Warming Rack Set. Top tier surface dimensions are 8-1/2" X 20-3/4" and pivot rod length is 26". Bottom tier surface dimensions are 10-1/2" X 23-1/2" and pivot rod length is 27-1/8".
  2. 8000 Series Dual Warming Rack Set - Top and Bottom Tiers
    8000 Series Dual Warming Rack Set. Top tier surface dimensions are 9" X 24" and pivot rod length is 28-3/4". Bottom tier surface dimensions are 10-1/2" X 26-1/4" and pivot rod length is 29-3/4".
Wheels, Casters and Tube Caps
  1. Portable Cart Wheel (6 Inch)
    Black 6 inch plastic cart wheel. Wheel is measured across the face of the wheel. Sold by each.
  2. Patio Caddie Hardware Kit
    Patio Caddie hardware kit. Includes all hardware as shown.
  3. Locking 2-3/4" Caster
    Locking swivel caster with 2-3/4" wheel. Features On/Off foot lever for locking caster wheel. Sturdy steel frame. Attaches by 7/16" stud end.

- End of List -

| Click here to help determine your model and narrow the list on our Char-broil grill parts home page |

How We Ship and Process Your Order:
We are a Charbroil authorized dealer and sell Charbroil factory original equipment certified parts.  Our ship times vary with the seasonal workload and may vary from 1 to 4 days.  We stock all items shown in this web section however occasional factory delays and backorders occur which may cause additional delays.  We work diligently to ship all orders within 24 hours.

Char-Broil, Masterflame, Precision Flame, Char-Broil Certified Parts and Accessories are trademarks of the W.C. Bradley Co.   Char-Broil grills, accessories, and products are manufactured and distributed for resale by the W.C. Bradley Company.
Barbecue Renew/www.grillparts.com is a factory authorized Char-Broil
dealer and parts distributor.

   Grillparts Home    Your Privacy    Your Security    Shipping Rates    Contact Us
 How to Order     Return Policy     Check Your Order Status 

1996-2003 Barbecue Renew, Inc. All rights reserved.