Char-Broil "Commercial Series" Gas Grills 
 Replacement Parts By Category

1. 13-3/4" Cast Iron "Bar Burner" With Slight Angle Top
   Optional 13-3/4" angled top burner. Burner measures 13-3/4" long X 2" wide. Economically replaces cast brass 13-3/4" burner. Important Product Note.
2. 15-3/4" Brass "Bar Burner" With Angled Top
   Commercial Series solid brass burner with an angled top. Burner dimensions are 15-3/4" long X 3" wide. The length measurement includes the bottom venturi tube length. The mounting pin clip is included.
3. 15-1/4" Brass "Round Oval" Burner
   Cast brass burner. Fits Commercial Series grills manufactured in 2002 - 2003. Replaces cast iron for longer durability. Burner length including venturi tube 15-1/4". Width 3-1/2". Product Note
4. 15-3/4" Cast Iron "Bar Burner" With Slight Angled Top
   Optional 15-3/4" angled top burner. Burner measures 15-3/4" long X 2-7/8" wide. Economically replaces cast brass 15-3/4" burner. Cast iron construction. Includes mounting clip.
5. 15-1/4" Cast Iron "Round Oval" Burner
   Cast iron burner. Porcelain coated flat finish. Fits Commercial Series grills manufactured in 2002 - 2003. Burner length including venturi tube 15-1/4". Width 3-1/2".

1. Adjustable Burner Support Bracket With Carryover Tubes
   Porcelain coated burner bracket with stainless steel carryover tubes for the three burner grills. Adjusts 23-1/2" to 25". (Burner shown is not included but shown as an example) Fits burners up to 2-5/8" wide.
2. 32-1/4" Burner Support Bracket With Carryover Tubes
   Black porcelain burner support bracket with stainless steel carryovers. Used with 4 burners. Bracket length 32-1/4". (Burner shown is not included and is shown for display purposes)
3. 25-1/4" Burner Support Bracket For Round Oval Burners
   Commercial Series 2001 - 2002 burner support bracket. Stainless steel flash channels are mounted on bracket. (Burner is not included and is shown for display purposes.) Bracket length 25-1/4". Note that the ends of the bracket bend downwards.

1. Commercial Series Round Oval Burner "Flame Tamer"
   Factory substitute for original equipment heat tent. Original is no longer available and this sub is not an exact match in dimension. Measures 6-1/2" wide X 16-7/8" front to back. Porcelain enamel coated steel.

1. 16-3/4" X 24" Porcelain Coated Rod Cooking Grate Set
   Heavy duty porcelain coated steel rod cooking grate set. Set contains two sections each measuring 16-3/4" front to back X 12" or a total measurement of 16-3/4" X 24".
2. 16-3/4" X 24" Stainless Steel Clad Cooking Grate Set
   Cooking grate set features stainless steel clad iron rod. Each section measures 16-3/4" X 12" for a total measurement of 16-3/4" X 24".
3. 18-5/8" X 32" Stainless Steel Cooking Grate Set
   Stainless steel three piece cooking grate set. Each section measures 18-5/8" X 10-3/8". The total combined cooking surface measures 18-5/8" X 32"
4. 18-1/2" X 26-1/4" Stainless Steel Rod Cooking Grate Set
   Heavy duty two piece stainless steel cook grid set. Constructed of 3/8" solid stainless steel rod. Each section measures 18-1/2" X 13-1/8" for a combined size of 18-1/2" X 26-1/4".

1. 2-Pole Electronic Ignitor Kit
   Kit includes two-pole electronic spark generator, electrode with molded in wire, electrode cover and auxillary wire. Takes AA battery which is not included.
2. Electronic Ignition Push Button
   Electronic ignition plastic push button. Inside spring is included.
3. 4 Port Electric Ignition Kit Commercial Series
   4 Port Electric Ignition Kit Commercial Series. Includes electronic spark generator, electrodes, wires, and miscellaneous.
4. Charbroil Commercial Series Ignitor Collector Box and Electrode
   Collector box and electrode assembly. Includes locking nuts and washer. Total component length is 4". Sold individually, more than one may be required.

1. 2-3/4" Control Knob Bezel
   Chrome control knob bezel. Bezel is 2-3/4" in diameter and is slotted both vertically and horizontally. Includes screws.
2. 1-3/4" Round Temperature Gauge
   Temperature gauge with wing-nut. Measures 1-3/4" in diameter. Guage reads 50 - 800 degrees F. Probe style with 1-1/4" probe. (Use with 2-1/4" temperature gauge bezel.)
3. 2-1/4" Temperature Gauge Bezel
   Chrome temperature gauge bezel. Diameter measures 2-1/4". (Inside diameter is 1-3/4", use with 1-3/4" temperature gauge.)
4. Locking 2-3/4" Caster
   Locking swivel caster with 2-3/4" wheel. Features On/Off foot lever for locking caster wheel. Sturdy steel frame. Attaches by 7/16" stud end.
5. Non-Locking 2-3/4" Caster
   Non-locking swivel caster with 2-3/4" wheel. Attaches by 7/16" stud end. Sturdy steel frame.
6. Rectangular Caster Socket Insert
   Caster socket insert for rectangular stainless steel legs. Surface dimension where the caster screws in is 1" X 2". Insert is 2-1/16" top to bottom. Accepts 7/16" threaded caster.
7. Metal Black And Chrome Control Knob
   Round metal control knob for some Commercial Series grills. Black soft touch grip over steel with chrome accents. Diameter measures 2"
8. Chrome Plastic Control Knob
   Chrome look, plastic control knob. Factory substitute for knob with black plastic detail. Measures 2" in diameter.