| Burner Assemblies |
- Front Avenue Porcelain Coated Cast Iron Burner
Front Avenue cast iron burner. Porcelain coated matte finish. Burner dimensions are 2-1/4" wide X 13-3/4" including the bottom side venturi tube length. Includes pin clip. Original equipment part.
- Front Avenue Painted Finish Cast Iron Burner
Front Avenue painted cast iron burner. Black Hi-Temp paint finish. Burner dimensions are 2-1/4" wide X 13-3/4" including the bottom side venturi tube length. Includes pin clip. After-market part.
- Front Avenue Stainless Steel Tube Burner
Front Avenue stainless steel tube burner. Burner length is 15-7/8".
|
| Burner Brackets and Crossovers |
- Adjustable Burner Support Bracket With Carryover Tubes
Porcelain coated burner bracket with stainless steel carryover tubes for the three burner grills. Adjusts 23-1/2" to 25". (Burner shown is not included but shown as an example) Fits burners up to 2-5/8" wide.
- Front Avenue Burner Support Rail For Cast Iron Burners
Burner support bracket for use with the cast iron burners. Stainless steel flash channels are mounted on stainless steel bracket. (Burner is not included and is shown for display purposes.) Bracket length 25". Used with 3-Burners.
- Burner Flash Tube For Front Avenue Tube Burners
The flash tube mounts between the burners to carry flame and ignition over to the adjacent burner. (Burners are not included and are shown for display purposes. Flash tube length is 4-3/4" not including screw tabs. Screws included.
|
| Burner Heat Tents |
- Front Avenue 4-1/4" X 14-1/2" Flame Tamer
Front Avenue burner shield or "Flame Tamer". Stainless steel. Measures 4-1/4" width X 14-1/2" front to back. For easier measurement we measure the width from edge to edge with the shield upside down.
- 3-3/4" X 16" Flame Tamer
Burner shield or "Flame Tamer". Stainless steel. Measures 3-3/4" width X 16" front to back. For easier measurement we measure the width from edge to edge with the shield upside down.
|
| Cooking Grates |
- 16-3/4" X 24" Porcelain Coated Rod Cooking Grate Set
Heavy duty porcelain coated steel rod cooking grate set. Set contains two sections each measuring 16-3/4" front to back X 12" or a total measurement of 16-3/4" X 24".
- 16-3/4" X 24" Stainless Steel Clad Cooking Grate Set
Cooking grate set features stainless steel clad iron rod. Each section measures 16-3/4" X 12" for a total measurement of 16-3/4" X 24".
- 18-1/2" X 26-1/4" Stainless Steel Rod Cooking Grate Set
Heavy duty two piece stainless steel cook grid set. Constructed of 3/8" solid stainless steel rod. Each section measures 18-1/2" X 13-1/8" for a combined size of 18-1/2" X 26-1/4".
|
| Ignitor Components |
- 2-Pole Electronic Ignitor Kit
Kit includes two-pole electronic spark generator, electrode with molded in wire, electrode cover and auxillary wire. Takes AA battery which is not included.
- Electronic Ignitor Pack
Electronic ignitor pack includes 4-connector electronic spark generator with push button, 2 electrodes, 2 electrode covers and wires. (Factory substitue for 80001219)
- Front Avenue Electronic Ignition Kit
Electronic ignition kit includes electrodes, wire, push button cap and electronic spark generator component with two connections.
|
| Miscellaneous Parts |
- 2-3/4" Control Knob Bezel
Chrome control knob bezel. Bezel is 2-3/4" in diameter and is slotted both vertically and horizontally. Includes screws.
- 1-3/4" Round Temperature Gauge
Temperature gauge with wing-nut. Measures 1-3/4" in diameter. Guage reads 50 - 800 degrees F. Probe style with 1-1/4" probe. (Use with 2-1/4" temperature gauge bezel.)
- 2-1/4" Temperature Gauge Bezel
Chrome temperature gauge bezel. Diameter measures 2-1/4". (Inside diameter is 1-3/4", use with 1-3/4" temperature gauge.)
- Locking 2-3/4" Caster
Locking swivel caster with 2-3/4" wheel. Features On/Off foot lever for locking caster wheel. Sturdy steel frame. Attaches by 7/16" stud end.
- Non-Locking 2-3/4" Caster
Non-locking swivel caster with 2-3/4" wheel. Attaches by 7/16" stud end. Sturdy steel frame.
- Weld-Assy,Grease tray for slide cup
Grease tray has slide track for the cup underneath (cup not included.)
- Chrome Control Knob With Set Screw
Solid cast metal control knob with chrome finish. Features set screw which secures the knob to the valve shaft. (Access hole for the set screw is on the backside of the knob.) Knob measures 2" in diameter.
- Rectangular Grease Catcher Cup
Grease cup for slide out tray. Black coated steel. Handle and mounting nuts included.
- Front Avenue Temperature Guage
Silver temperature guage. Reads 50 - 800 degrees. Includes wing nut for mounting. Measures 2-3/8" in diameter.
- Front Avenue Temperature Guage Bezel
Temperature guage bezel. Measures 3-1/2" in diameter.
- Front Avenue Gas Control Knob
Front Avenue gas control knob. Knob is 2" in diameter.
- Gas Control Knob Bezel
Silver gas control knob bezel with graphics. Bezel is 3" in diameter.
|
| Universal Grilling Accessories |
- 18" Grill Brush
Long handled 18" grill brush keeps your hand away from hot cooking surfaces. Hardwood handle with wide cleaning head. Constructed of brass bristles which will not damage porcelain coated surfaces.
|
