Charmglow Gas Grill Parts

Charmglow Gas Grill Parts
 Listing by Category
(Home Depot® Models Only)


Page instructions: Click on any part description for photo, additional part detail and ordering.

  A. Burner Tubes and Assemblies 

# 12171 - 19-1/2" Stainless Steel Trident Tube Burner
Stainless steel "trident" shaped tube burner. Measures 19-1/2" total length front to back including the center tube X 6" wide. Fits some DCS models and also some Charmglow models.

# CIT-L - 16-1/4" Cast Iron Burner
Straight "rail" style cast iron burner. Dimensions are 2-3/8" across the top X 16-1/4" long. (Length measurement is total length tip to tip.)

# CTB2 - 16-1/4" Stainless Steel Tube Burner
Stainless steel straight tube burner. Mounting tab is flat and has the mounting hole offset to the right side of the tab. Measures 16-1/4" end to end.

# CTB3 - 15-7/8" Stainless Steel Tube Burner
Stainless steel straight tube burner. Mounting tab is flat and has the mounting hole offset to the right side of the tab. Measures 15-7/8" end to end.

  B. Burner Shields and Radiants 

# 2bmhp2 - 16-3/8" Heat Plate Set
Heavy duty stainless steel heat plate set. Two sections with each section measuring 16-3/8" front to back X 12" wide. Total width with both sections side by side is 24".

# 99051 - 18-3/4" Porcelain Coated Heat Distribution Shield
Black porcelain coated heat distribution plate. Measures 18-3/4" front to back X 10-1/8" wide. (Sold by each, more than one may be required.)

# BMHP1 - 16-3/4" x 4" Burner Heat Distribution Shield
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 16-3/4" long X 4" wide (measured across the bottom). Features slotted punched holes and cut-outs on both ends.

# CHMBHP1 - 17-3/4" X 6-1/4" Burner Heat Distribution Shield
Heavy gauge 430 stainless steel, accordion style burner shield. Measures 17-3/4" front to back X 6-1/4" side to side (measured across the bottom at the front or back widest point).

# CHMBHP2 - 17-7/8" x 4" Burner Heat Distribution Shield
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17-7/8" long X 4" wide (measured across the bottom).

# CHMBHP3 - 15-3/8" x 3-3/4" Burner Heat Distribution Shield
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 15-3/8" long X 3-3/4" wide (measured across the bottom).

  C. Ignitor Components 

# B072218 - Electronic Spark Generator With Two Inputs
Electronic igniter spark generator. Includes button, internal battery connection spring and mounting locknut. Features two connector pins on rear of component.

# IG-21 - Ignitor Collector Box And Electrode With Single Mounting Screw
Ignitor gas collector box with electrode and wire. This collector box extends out about 1-1/2 inches and the electrode length is 1/2" from the gas collector box. Mounts with single screw.

# IG-23 - T-Shaped Ignitor Collector Box and Electrode
Stainless steel ignitor spark box with electrode and wire. Mounts between burners and ignites the gas as it flows through the burner tube. Measures 5-5/16" across the box and stands out approximately 3-1/2".

# IGEIB3B - Rear Output 3-Pole Electronic Ignition Module
3-pole electronic spark generator (where there are three wire connections on the back side). Uses one AAA battery. Requires a 3/4" or 13/16" mounting hole. Clear epoxy encapsulated coil.

# P2503H - Ignitor 4-Port Electronic Spark Generator
Electronic spark generator with four wire connection tabs on the rear. Chrome look plastic push button. Use AA battery not included.

  D. Cooking Grates 

# 54002 - 15-3/4" x 24" Porcelain Coated Cooking Grate Set
Heavy duty, 2 piece porcelain coated steel rod, cooking grate set. Each piece measures 12" wide X 15-3/4" front to back, for a total set width of 24".

# 59411 - 9-1/4" x 15-3/8" Porcelain Coated Stamped Steel Cooking Grate
Porcelain coated stamped steel cooking grate. Measures 9-1/4" wide x 15-3/8" front to back. More than one required, sold individually.

# 62152 - 19-1/4" X 24-3/4" Cast Iron 2-Piece Cooking Grate Set
Heavy duty, 2 piece porcelain coated cast iron cooking grate set. Each section measures 12-3/8" wide x 19-1/4" front to back, for a total set width of 24-3/4".

# 64103 - 26-3/4" Cast Iron 3-Piece Cooking Grate Set
Cast iron cooking grate set. Flat matte (non-glossy) porcelain coated finish. All sections measure 17-3/4" front to back X 8-15/16" wide. Total width together is 26-3/4".

# 66662 - 19" X 25" 2 Piece Matte Cast Iron Cooking Grate Set
Heavy duty 2 piece, matte finish cast iron cooking grate set. Each piece measures 12-1/2" wide x 19" front to back, for a total set width of 25".

- End of List -

Grillparts Home Page  |  Charmglow Home Page  |

 

About our parts and pricing:
The parts we list for these models are exact fit replacements made in the U.S.A of high grade 430 stainless steel.  These parts meet and generally exceed original equipment quality.  We keep our prices low for our customers and our deep discounts are not an indication of lower quality but are a reflection of our buying and selling volume and our commitment to our customers for best price and service.
 
How We Ship and Process Your Order:
We do not offer over-night or next day shipping but we do expedite all orders we receive and make every effort to process and ship the same day (Mon. - Friday) or the next day if the order is received after 3:00PM.  Outside of busy season, which is early spring, our orders are generally processed and completed for shipment within an hour of receipt. We inventory all items shown and ship directly to you from our location in Destin Florida.
 
Shipping Rates are based on the total dollar amount of the sale and are automatically added to the shopping cart total.  For a listing see Shipping Rates.  We generally use Priority Mail for packages up to two pounds and United Parcel Service for packages over two pounds.
 

Barbecue Renew/www.grillparts.com is not affiliated with Home Depot® or Lowe's® and the parts we sell are distributed for resale by Modern Home Products Corporation, Antioch, Illinois.


   Grillparts Home    Your Privacy    Your Security    Shipping Rates    Contact Us
 How to Order     Return Policy     Check Your Order Status 

©1996-2010 Barbecue Renew, Inc. All rights reserved.