Fiesta Gas Grill
Parts Listing by Category

Page instructions: Click on any part description for photo, additional part detail and ordering.

1. 345 Series 17-1/2" Stainless Steel H-Burner
   Stainless steel H-Burner assembly. Fits 345 series grills using this burner design. Dimensions 8" X 17-1/2".
2. 22-1/4" Stainless Steel H-Burner with 5-1/2" Tube Reach
   Large stainless steel H-Burner. Dimensions 8" X 22-1/4". Tube reach is 5-1/2" from the centerline where it comes out of the burner to the end of the tube. Includes electrode holder and electrode. How to measure
3. 22-1/4" Stainless Steel H-Burner with 4-1/4" Tube Reach
   Dimensions 8" X 22-1/4". Tube reach is 4-1/4" from the centerline where it comes out of the burner to the end of the tube. Includes electrode holder and electrode. Shipped assembled. How to measure

1. 345 Series Porcelain Coated Cooking Grid
   Heavy duty porcelain coated cooking grid. One piece, dimensions 14-1/4" W X 22-3/4" L. Fits 345 series grills.
2. 240 Series Porcelain Coated Cooking Grid
   Fiesta 240 Series porcelain coated steel cooking grid. Measures 11-1/4" W X 20" L.

1. Fiesta Standard 14" Grill Hood Handle
   Standard Fiesta plastic 14" grill hood lifting handle. Screws are 12-1/2" on center. Gasket and hardware pack not included. (Uses gasket and hardware pack SP31A-HDW)
2. Gasket and Hardware Pack for Standard 14" Handle
   Gaskets and wing nuts for Fiesta 14" standard grill hood handle.
3. Advantis 12" Grill Hood Handle
   Advantis 12" grill hood lifting handle. Mounting studs are 8" on center. Gaskets and wing nuts not included. (Use SP5006-HDW gasket and wing nut pack)
4. Economy Handle With Wing Nuts
   Economy stud-mount type handle. 9-1/2" Wide. Mounting studs are spaced 8" on center. Includes wing nuts.
5. 450 Series Right and Left Handle End Cap Set
   450 Series right and left hood handle end caps. Handle bar which fits between end caps and hardware are not included. (Uses hardware package SP5024-HDW)

1. 300 Series Heat Distribution Plate Set
   Fiesta 300 Series Heat Distribution Plate Set. Dimensions are 10-1/4 inches front to back by 18 inches side to side with plates together. Designed to vaporize food drippings, evenly spread the heat and to reduce flare-ups.
2. Drip Vaporiser Shield Support Channel Set (Smart Rod Set)
   Set of two support channels for the drip vaporiser shields. Channel length is 12". (Fiesta refers to these rods as "smart rods".)
3. 345 Series Porcelain Coated Drip Vaporizer Shield
   Porcelain coated heat distribution plate. Distributes heat evenly and vaporizes food drippings. Lava rock not required. Fits 345 series grills. Dimensions 21-1/4" X 10-1/2"
4. 400/450 Series Porcelain Coated Drip Vaporizer Shield
   Porcelain coated heat distribution plate. Distributes heat evenly and vaporizes food drippings. Lava rock not required. Fits both 400 and 450 series grills. Dimensions 25-1/2" X 10-1/2".
5. 345 Series Porcelain Coated Heat Tent
   Porcelain coated steel tent style design. Dimensions 7-3/4" X 22-1/2". Fits Fiesta 345 series grills.

1. 240 Series Aluminized Steel Heat Tent
   Aluminum coated steel heat tent. Dimensions 6-1/2" X 19-1/2". Fits Fiesta 245 series grills.
2. 300 Series Aluminized Steel Heat Tent
   Aluminum coated steel heat tent. Dimensions 7" X 20-1/2". Fits Fiesta 300 series grills.

1. Single Pole Snap-In Push Button Spark Generator
   Snap-In ignitor push button for units without side burners. (Single pole. Uses one wire.) Wire not included.
2. Double Pole Snap-In Push Button Spark Generator
   Snap-in 2 pole pushbutton for units with sideburners. Uses two wires. One connects at bottom with a round connector and the other at the side with a flat connector.
3. Double Pole Rotary Spark Generator
   Rotary spark generator with knob and screws. Double pole generator uses two wires. Knob snaps and locks onto generator shaft.

1. High Profile Gas Control Knob
   Deluxe black plastic gas control knob with printed markings on sides. High profile grip for easy turning.
2. Deluxe Knob for Auto-Ignition
   Black plastic gas control knob. For grills with the auto ignition feature. This knob is distinguished by the lightninig bolt symbol near the HI mark on the knob.
3. Rotary Ignitor Knob
   Black plastic rotary ignitor knob. Fits both Fiesta single and two pole rotary ignitor spark generators. Sold by each.
4. Side Burner Recessed Knob
   Side burner knob which is recessed into the control panel. Knob is 2-1/8" in diameter.

1. Grill Greats Ceramic Grill Tiles
   Modern alternative for briquets and lava-rock with superior heat distribution. Perforated ceramic tiles reduce flare-ups and provide great barbecue flavor. 2" X 3-1/2" tiles, 45 per carton cover 315 square inches or 13" X 24" surface area.
2. Porcelain Briquets
   BBQer Choice® Porcelain Grill Briquets. Superior heat transfer, Self Cleaning, Virtually indestructible, Kiln-Fired Porcelain, For all gas and electric grills, Covers appoximately 275 square inches.
3. 400/450 Series Lava Rock Grate
   Rock grate fits both Fiesta 400 and Fiesta 450 series grills. Measures 12" X 25-1/4".
4. 240 Series Lava Rock Grate
   Lava rock or briquet grate for Fiesta 240 series grills. Measures 10" X 19".
5. 300 Series Lava Rock Grate
   Lava rock or briquet grate for Fiesta 300 series grills. Measures 11-1/4" X 20".

1. Weber 18" Grill Brush
   Long handled 18" grill brush keeps your hand away from hot cooking surfaces. Hardwood handle with wide cleaning head.
2. "Grease Catcher" Hanger Wire and Cup
   Aluminum grease catcher cup which hangs under the grill to catch excess drippings. Includes hanger which threads through the drip hole in the bottom of the casting
3. Side Burner Grid
   Black porcelain coated side burner grid. 8-1/2" x 9-1/2".
4. 5" Logo Plate with Temperature Gauge
   Temperature gauge indicates 200 - 700 degrees F. Dimensions 5" x 2-1/2". Mounting studs to insert into grill lid 4" on center. Hardware not included.