Weber Gas Grill Parts: Complete Parts Listing by Category

Weber Burner Assemblies

#30501016 - Weber Ducane Affinity 3100/3200/3400 Burner Tube Set
Set of three Ducane Affinity Series tube burners. Original equipment stainless steel. Burner length is 18". (Measurement includes the forked end which inserts into the slots at the rear of the grill.)

#30501017 - Weber Ducane Affinity 4100/4200/4400 Burner Tube Set
Set of four Ducane Affinity Series tube burners. Original equipment stainless steel. Burner length is 18". (Measurement includes the forked end which inserts into the slots at the rear of the grill.)

#30501023 - Weber Ducane Affinity 4400 Rotisserie Burner
Rotisserie burner. Fits Ducane Affinity 4400 model. Stainless steel "T" burner. The curved gas tube leading to the 17" straight burner is centered on this burner and reaches forward 18".

#30501024 - Weber Ducane Affinity 3400 Rotisserie Burner
Rotisserie burner. Fits Ducane Affinity 3400 model. Stainless steel "T" burner. The curved gas tube leading to the 17" straight burner is offset to the right on this burner and reaches forward 18".

#30501047 - Weber Ducane Affinity 3-Burner Collector Box And Electrode Set
3-burner collector box and electrode set. Kit includes three igniter collector boxes with ceramic electrodes and molded in wires. For Ducane Affinity grills. Two with 22" wires and one with a 35-3/4" wire. All wires have flat spade connectors.

#41657 - Weber Q100 and Q120 Burner Tube
Stainless steel burner tube. Fits Weber Q100 and Q120. Burner length is 17".

#41773 - Weber Smoker Burner For Summit Silver, Gold and Platinum
Smoker burner for Summit Silver, Gold and Platinum C/D series grills. Stainless steel with spider screen. 20-1/2" long. (This burner cannot be substituted for other main burners as it has no hole for the burner flame crossover tube.)

#41841-43 - Weber Summit Gold, Silver and Platinum Burner Set (6 - Burner Models More Than One Set Required.)
Stainless steel burner tube set includes one right, one left and one crossover tube. (Three sets required for 6-burner grills.) Genuine Weber parts. Main burners are 20-1/2" long tip to tip and crossover burner is 6-1/8" long. Fits 6 burner models.

#41841-59 - Weber Summit Gold, Silver and Platinum Burner Tube Set (4-Burner Models More Than One Set Required.)
Stainless steel burner tube set includes one right, one left and one crossover tube. (Two sets required for 4-burner grills.) Genuine Weber parts. Main burners are 20-1/2" long tip to tip and crossover burner is 7" long. Fits models with 4 burners.

#41862 - Weber Q200, Q220 Burner Tube
Stainless steel burner tube. Fits Weber Q200 and Q220. Burner length is 20-1/2".

#490116 - Weber 17-1/4" Tube Burner for Go-Anywhere Portable
Original equipment, stainless steel replacement burner for Weber Go-Anywhere model. Burner length 17 1/4 inches.

#7506 - Weber 29" Stainless Steel Burner and Crossover Set
Includes 29" front and rear burners, 28-1/2" center burner and 13-1/2" crossover burner. Features built-in wire screen venturi spider guards. Fits full size Genesis, Platinum and Gold models prior to 2002. Hardware included.

#7507 - Weber 27" Stainless Steel Burner and Crossover Set
Fits Weber Silver A and Spirit 500 models. Includes front and rear burners which measure 27" and the crossover burner measures 10-1/2". Features built-in wire screen venturi spider guards. Replacement hardware for control valve manifold included.

#7508 - Weber 28" Stainless Steel Burner and Crossover Set
Includes 28" front and rear burners, 27-1/4" center burner and 12-3/4" crossover burner. Features built-in wire screen venturi spider guards. Hardware included. Fits Spirit 700, Silver B & C, and Weber 900. Also Gold and Platinum 2002 models to current.

#80387 - Weber Q300 Burner Tube Set
Burner set includes main p-shaped burner and center burner tube. Also includes mounting hardware. Burner length is 24" including mounting tab. Center burner measures 22".

#92365-2 - Weber Summit 400 and 600 Series Burner Set
Stainless steel burner set includes right, left and crossover burner. (Two sets required for 4-Burner models and three sets required for 6-burner models). Main burners are 21-1/8" long tip to tip and crossover burner is 6-3/4" long. Genuine Weber parts.

Weber Burner Shield Flavorizer Bars

#30501012 - Weber Ducane Affinity 3400 Flavorizer Bar Set
Full set of three porcelain coated steel heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits Ducane Affinity 3400 model grills. The two right sections are notched for the rotisserie burner.

#30501014 - Weber Ducane Affinity 4400 Flavorizer Bar Set
Full set of four porcelain coated steel heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits Ducane Affinity 4400 model grills. The two center sections are notched for the rotisserie burner.

#7534 - Weber Porcelain Coated Flavorizer Bar Set
Set of 5 porcelain coated flavorizer bars for Weber Spirit 500 and Silver A model gas grills. Bar length is 21-1/2".

#7535 - Weber Stainless Steel Flavorizer Bar Set
Set of 5 stainless steel flavorizer bars for Weber Spirit 500 and Silver A model gas grills. Bars are 21-1/2" long.

#7536 - Weber Porcelain Coated Flavorizer Bar Set
Set of 5 porcelain enamel coated flavoriser bars. Each bar measures 22-1/2" long. Fits Genesis Silver B and C, Spirit 700, Weber 900 gas grill models.

#7537 - Weber Stainless Steel Flavorizer Bar Set
Set of 5 stainless steel flavoriser bars. Each bar measures 22-1/2" long. Fits Genesis Silver B and C, Spirit 700, Weber 900 gas grill models.

#7538 - Weber Stainless Steel Flavorizer Bar Set
Full set of 13 stainless steel flavorizer bars (8 short and 5 long). The short bars are 16" and the long bars are 23-3/8".

#966050 - Weber Go-Anywhere® Flavorizer Plate
Porcelain enamel Flavorizer plate for Weber Go-Anywhere® grill. Measures 9" front to back, 15" side to side.

#9813 - Weber Porcelain Coated Flavorizer Bar Set
Full set of 13 porcelain coated flavorizer bars. Includes 8 short and 5 long bars. The short bars are 16" and the long bars are 23-3/8".

#9896 - Weber Summit Silver A & B Stainless Steel #9896 Flavorizer Bar Set
Summit Silver A and Summit Silver B stainless steel flavorizer bar set. One section is made up of 5 bars and the other section 4 bars. Together the sections contain a total of 9 bars.

#9897 - Weber Summit Gold A & B Stainless Steel Flavorizer Bar Set
Two section Summit Gold flavorizer bar set. On section is made up of 7 bars and the other 6 bars for a total width of 13 bars. Fits Summit Gold A and B series.

#9898 - Weber Summit Silver C, Gold C & Silver D Stainless Steel #9898 Flavorizer Bar Set
Summit Silver C, Gold C & Silver D Series stainless steel flavorizer bar set. Two sections with 8 bars total. This set of bars is used with Summit Silver models which are equipped with the smoker box accessory.

#9899 - Weber Summit Gold D Stainless Steel Flavorizer Bar Set
Summit Gold D flavorizer bar set. Stainless steel. This is the "smoker set" and includes two sections each with 6 bars in the weldment. As always genuine Weber parts.

#9912 - Weber Porcelain Coated Flavorizer Bar Set
Price per set of 5. Porcelain enameled flavoriser bars. Bar dimensions are 23-3/8" long X 3" tall. Fits Gold B & C and Platinum B & C grills from 2002 to current.

#9913 - Weber Stainless Steel Flavorizer Bar Set
Set of 5 stainless steel flavoriser bars. Bar dimensions are 23-3/8" long X 3" tall. Fits Gold B & C and Platinum B & C grills from 2002 to current.

#9920 - Weber Summit 400 Series Stainless Steel Flavorizer Bar Set
Full set of 7 stainless steel vaporiser bars. For Summit 400, 425, 450 and 475 series gas grills. Dimensions of each bar are 15-7/8" long X 2-1/4" wide.

#9921 - Weber Summit 600 Series Stainless Steel Flavorizer Bar Set
Full set of 11 stainless steel vaporiser bars. For Summit 600, 625, 650 and 675 series gas grills. Genuine Weber parts. Dimensions of each bar are 15-7/8" long X 2-1/4" wide.

Weber Cooking Grates

#41658 - Weber Q100 and Q120 Cast Iron Cooking Grate
Cast iron cooking grate for Weber Q100 and Q120. Dimensions at widest points are 12-1/2" front to back and 16-3/4" side to side. Heavy cast iron construction.

#41878 - Weber Q200, Q220 Cast Iron Cooking Grate
Cast iron cooking grate for Weber Q200 and Q220. (Does not fit the Q300). Dimensions at widest points are 15-1/4" front to back and 21-1/4" side to side. Heavy cast iron construction.

#42032-2 - Weber Summit 28" Cooking Grate Set
Two section stainless steel cooking grate set. Each section measures 17-5/16" front to back and 13-3/4" wide. For Summit Silver and Gold 4-burner models without smoker box accessory.

#70211 - Weber Go-Anywhere® Cooking Grid
Chrome plated cooking grid for Weber Go-Anywhere Grill. Measures 10 inches front to back by 16 inches wide.

#7513 - Weber Chrome Plated Warming Rack
Heavy guage chrome plated warming rack which sets across the back of the grill. Dimensions are 4-3/4" X 25" wide. The width measurement includes the rod tips which set into the notches on the grill.

#7514 - Weber 24-1/4" Genesis Gas Grill Warm Up Basket (This part is only compatible with part 80640)
Weber Genesis chrome plated warm up basket. Basket hangs from the grill lid and swings as the lid is opened. Full length tip-to-tip measurement of the hanging pins is 24-1/4". Please note this part is only compatible with part 80640.

#7521 - Weber Stainless Steel Cooking Grate Set
Optional replacement stainless steel cooking grates for Weber Spirit 500 and Silver A model gas grills. Two sections each 11-3/8 inches wide by 15 inches front to back

#7523 - Weber Porcelain Coated Cooking Grate Set
Original replacement porcelain coated cooking grates for Weber Spirit 500 and Silver A model gas grills. Two sections each 11-3/8 inches wide by 15 inches front to back.

#7525 - Weber Porcelain Enameled Steel 50/50 Split Cooking Grate Set
Porcelain enamel coated steel cooking grate set for Weber Genesis, Platinum and Gold model gas grills. 50/50 Split with each section measuring 11-3/4 inches wide by 17-1/4 inches front to back.

#7526 - Weber Cast Iron 50/50 Split Cooking Grate Set
Heavy cast iron matt finish porcelain coated cooking grate set for Weber Genesis, Platinum and Gold model gas grills. 50/50 Split with each section measuring 11-3/4 inches wide by 17-1/4 inches front to back.

#7527 - Weber Stainless Steel 50/50 Split Cooking Grate Set
This replacement set of stainless steel grids is offered as an exact-fit replacement for porcelain set 7525. Individual cook grid measures 11-3/4 inches wide by 17-1/4 inches front to back to combine for overall size of 23-5/8 by 17-1/4.

#80640 - Weber Chrome Plated Warming Rack
Heavy duty chrome plated flat warming rack/bun warmer. Dimensions are 4-3/4" X 24" wide. The width measurement includes the rod tips which set into the notches on the grill sides. Fits Spirit 350, 500 and Silver A models.

Weber Electrodes, Ignitor Components

#30500004 - Weber Single Output Electronic Ignition Module
Ignition module with rubber push button and spring. Requires AA battery. Battery not included. Single outlet for one wire output system on back of module.

#30500614 - Weber Ducane Infa-Red Rotisserie Burner Ignitor
Rotisserie burner ignitor electrode with insulated wire, thermocouple and mounting box. Fits Ducane Stainless Series.

#41926 - Weber 6 Output Summit Electronic Ignition Module
This ignition module has 6 output terminals and two input terminals for the push button. Measures 7/8" wide X 5-3/8".

#42047 - Weber 4 Output Summit Electronic Ignition Module
This ignition module has 4 output terminals and two input terminals for the push button. Measures 7/8" wide X 4-1/4".

#42050 - Weber Electrode Ignitor Component For Summit Silver and Gold
Igniter collector box with ceramic electrode and molded in wire. For Weber Summit and Gold models. Wire is 17" long and terminates with a flat spade connector.

#42053 - Weber Red Button Round 2-Connector Ignition Switch
Round barrel shaped ignition switch for Summit Silver/Gold. Two flat connectors. Requires AA battery. (Battery not included!)

#67726 - Weber Genesis 300 Series Electronic Ignitor Kit With Metal Spark Box
Genesis 300-E and 300-S Series (2007 models) ignitor kit. The distinctive part in this kit is the metal gas collector box and electrode. Includes the 2-pole spark generator, collector box with electrode, push button cap, wire retainer and battery.

#67847 - Weber Genesis 300 Series Electronic Ignitor Kit With White Ceramic Spark Box
Genesis 300-E and 300-S Series (2008 thru 2010 models) ignitor kit. The distinctive part in this kit is the white molded ceramic electrode and wires. Includes the 2-pole spark generator, electrode, push button cap, wire retainer and battery.

#7509 - Weber Ignitor Kit With Lock-Nut Style Push Button
Burner ignitor kit with push button which uses a locking nut. Includes push button, wires and gas collector box with electrode. For models prior to 2002. (Push button is different because of lock nut and is black.)

#7510 - Weber Ignitor Kit With Snap-In Style Push Button
Burner ignitor kit with push button which snaps into place. Includes push button, wires and gas collector box with electrode. For models after 2002. (Push button is different because of snap in feature and is red.)

#80391 - Weber Q300 Ignitor Kit
Ignitor kit for Weber Q300. Includes the sparkbox electrode wire assembly and the two pole spark generator push button.

#91360 - Weber Spirit Electronic Ignitor Kit
Electronic ignition kit for newer Weber Spirit models. Includes 2 pole electronic spark generator, gas collector spark box and rubber pushbutton.

#9251015 - Weber Ignitor Rocker Switch Assembly
Grey rectangular plastic ignitor rocker switch and rocker switch frame. Snaps into the top of the control panel over the ignitor push button. Frame measures 1-7/16" X 2".

#97667 - Weber Ignitor Assembly for Go-Anywhere Model
Side mounting pushbutton spark generator with attached electrode. Ignitor assembly mounts through the side lighting hole for easy and match free lighting.

#QSPARK - Weber Q100 and Q200 Ignitor Replacement Kit
Weber Q100 and Q200 ignitor replacement kit. .

Weber Gas Control Valves

#30500146 - Weber Ducane Stainless Series Natural Gas Valve and Ignitor Assembly
Main control valve for Ducane Stainless 3 and 5 burner models that use a natural gas hookup. Shipped as shown with ignitor flash tube and electrode attached.

#30500147 - Weber Ducane Stainless Series L/P or Propane Gas Valve and Ignitor Assembly
Main control valve for Ducane Stainless 3 and 5 burner models that use an L/P or propane gas hookup. Shipped as shown with ignitor flash tube and electrode attached.

Weber Handles and Knobs

#40242802 - Weber Q300 Large Gas Control Knob
Large gas control knob for the Q300. This is the knob that controls the outside perimeter burner. Measures 2-3/4" in diameter. Black printing indicates Off and Start/Hi to Low with with loooped burner emblem on top as shown.

#40242902 - Weber Q300 Small Gas Control Knob
Small gas control knob for the Q300. This is the knob that controls the center burner. Measures 2-1/4" in diameter. Black printing indicates Off and Start/Hi to Low with with single burner emblem on top as shown.

#41889 - Weber Q200 Gas Control Knob
Weber Q200 and Q300 gas control knob. Knob is 2-7/8" in diameter. Please measure to assure the knob is correct for your grill.

#41890 - Weber Q Lid Handle
Weber Q black lid handle. Handle is 7" wide. Mounting screw holes are 5-1/2" center to center.

#7405 - Weber Charcoal Kettle Lid Handle
Weber charcoal grill lid handle. Grey 6" high temperature plastic resin handle with mounting screw. Fits 18-1/2", 22-1/2" and Ranch Kettles. Also fits Smokey Mountain Cooker Smoker.

#78960 - Weber Genesis Control Knob
Light gray plastic control knob. Measures 1-7/8" in diameter. Stem on bottom is 1-7/8" long.

#87963 - Weber Lattice Design Hood Replacement Handle
Lattice design hood replacement handle. Grey heavy plastic composite 25" long. Replaces older wood handles. Fits Silver B & C, Genesis 1000-5500 and Platinum I & II.

#99242 - Weber Gas Control Knob Set
Set of three gas control knobs. Newer style which will also fit older models. Light grey. 2-1/4" in diameter. Stem length extends 1-3/8" from the bottom of the knob.

Weber Hose, Valves and Regulators

#41643 - Weber Q100 and Q120 Gas Control Assembly (Before 2008)
Gas control valve and regulator assembly for Weber Q100 and Q120 manufactured before 2008. (Will not fit newer models that have the mounting bracket). Please note we receive these new in bulk and they may have cosmetic scratches as shown.

#41945 - Weber Q200 and Q220 Gas Control Assembly (Before 2008)
Gas control valve and regulator assembly for Weber Q200 and Q220 manufactured before 2008. (Will not fit newer models that have the mounting bracket). Please note we receive these new in bulk and they may have cosmetic scratches as shown.

#62565 - Weber Hose Regulator Assembly With Type I Tank Fitting (for models prior to 2002)
Replacement hose regulator assembly. Regulator is set up with new style black hand nut fitting for tanks using this common connector. Hose has a male pipe fitting which attaches directly to the gas manifold. Hose length 22" long.

#63419 - Weber Hose Regulator Assembly With Quick Connect Tank Fitting (for models prior to 2002)
Replacement hose regulator assembly. Regulator is set up with "quick connect" fitting for tanks using this type connector. Hose has a male pipe fitting which attaches directly to the gas manifold. Hose length 22" long.

#7501 - Weber Hose and Regulator Assembly for Silver A
Regulator is set up with new style black hand nut fitting for tanks using this connector. Hose has a female flare connecter fitting which attaches to a male fitting on the manifold. Hose length 17" long. Fits Silver A models.

#7502 - Weber Hose and Regulator Assembly for Gold B & C, Silver B & C
Regulator has new style black hand nut fitting for tanks using this connector. Hose connects with a female flare fitting which attaches to a male fitting on the manifold. Hose length 22" long. Fits Gold B & C, Silver B & C models.

#80476 - Weber Q200 and Q220 Gas Control Assembly with Bracket (2008 and newer)
Valve and regulator assembly with mounting bracket for 2008 and newer Q200/Q220 models. (Older regulators do not have the mounting bracket which also acts as a brace on the newer models. Brace with regulator length is approximately 11 inches.

#80477 - Weber Q100 and Q120 Gas Control Assembly with Bracket (2008 and newer)
Valve and regulator assembly with mounting bracket for 2008 and newer Q100/Q120 models. (Older regulators do not have the mounting bracket which also acts as a brace on the newer models. Brace with regulator length is approximately 8 inches.

#87504 - Weber Brass Regulator Retaining Hex Nut
Brass retainer hex nut for Weber-Q part number 41643 or 41945 regulators. (Hex nut only, valve stem shown for display purposes).

#90400 - Weber Go-Anywhere Grill Regulator
Regulator and control with orifice for Weber model Go-Anywhere grill. Does not interchange with other brand portable models.

Weber Miscellaneous

#16SSC - Weber Ferons Stainless Steel Cleaner
Heavy duty stainless steel cleaner and polish. Long lasting 16 ounce bottle. Super cleaner for inside and outside stainless steel grills.

#30500011 - Weber Ducane Heat and Temperature Indicator
Stainless steel heat indicator. Temperature range 200 - 600 degrees F. Solid bi-metalic probe. Fits Ducane stainless series grills.

#3301 - Weber 9" X 13" Catch Pan Liners
Large aluminum foil drip pan liners. Dimensions 9" X 13". Also great for indirectly grilling vegetables. 10 each per package.

#40246501 - Weber Q200 Front Leg Frame
Weber Q200 front leg frame. Frame measures 29" across and has an indented hole on the left side for the ignitor push button.

#41604 - Weber Q200 Rear Leg Frame
Weber Q200 rear leg frame. Frame measures 29" across. This frame piece differs from the front and does not have an indented hole on the left side for the ignitor push button.

#41667 - Weber Q100 and Q120 Catch Pan Holder
Weber Q100 and Q120 grease catch pan holder. Aluminum construction. Outside dimensions are 9-1/4" wide X 10-3/4" front to back.

#41933 - Weber 28-3/8" Bottom Drip Tray For Many Silver, Gold, Platinum and Summit Models
Bottom drip tray. Dimensions are 5" wide X 28-3/8" long.

Fits Silver A,B,C,D Gold A4,B4,C4,D4, Platinum A4,B4,C4,D4 and Summit.

#42583 - Weber Summit Series Temperature Indicator With Tab
Temperature indicator with 100 - 750 degree range. Mounts through grill hood (mounting nut not included). Measures 2-3/8" in diameter. Probe length is 1-7/8" from the back of the guage. Has a tab at the top of the backside to keep indicator in place.

#48830205 - Weber Filler Adaptor
Brass adaptor that attaches to your propane suppliers filler valve to allow tanks equipped with quick connect fittings to be filled.

#60393 - Weber Summit Series Temperature Indicator Without Tab
Summit series temperature indicator. Dial incremented from 0 - 700 degrees F. Measures 2-3/8" in diameter. Includes wing nut and lock washer. Fits Summit Gold, Summit Platinum and Summit Silver.

#6415 - Weber 6" X 8-1/2" Catch Pan Liners
Custom fit aluminum foil disposable drip pan liners. Size 6-1/2" X 8-1/2" for perfect fit. 10 per package.

#6417 - Weber 5" X 11" Summit Catch Pan Liners
Aluminum foil catch pan liners. These liners are designed to fit Weber Summit Gold 6-Burner and Platinum 6-Burner, Summit S-400 and S-600. Dimensions 5" X 11". 10 each per package.

#6424 - Weber 21" Round Bristle Grill Brush
New design brush is constucted of stiff stainless steel bristles which help tackle tough baked on food. Barrel design for easy cleaning in between cooking grate bars and an extra long 21" handle to keep your hand away from the heat.

#6438 - Weber Style® Remote Digital Thermometer
Here is a secret to grilling success. Set this easy to use remote system for the type of meat you are grilling, the way you like it done, and experience tender and moist every time. This Weber Style® quality cooking accessory also makes a great gift.

#6464 - Weber 18" Grill Brush
Long handled 18" grill brush keeps your hand away from hot cooking surfaces. Hardwood handle with wide cleaning head. Stainless steel bristles.

#6503 - Weber WEBER Q HANDLE LIGHT
WEBER Q HANDLE LIGHT

#6553 - Weber 6553 - Q300 Premium Grill Cover
Customer fit Weber Q300 premium cover. Genuine Weber product.

#7404 - Weber Premium Cast Iron Griddle For Summit Series
Heavy duty custom fit porcelain enameled cast iron griddle. Reversible. One side is smooth and the reversed side is ribbed. For Summit 400/600, Silver C/D, Gold A/B/D/A6/B6/C4/D4/D6 and Platinum A6/B6. Dimensions are 19-1/4" front to back X 12" wide.

#7515 - Weber Grease Catch Pan and Holding Bracket
Weber gas grill catch pan and holding bracket. Includes porcelain coated steel pan and bracket. Uses catch pan liners part number 6415 Dimensions 6-1/2" X 8-1/2" (Not Included).

#7552 - Weber 7552 - 66" Premium Grill Cover
Weber custom fit cover for Silver C, Gold B&C (2002 and newer), and Genesis 2000-5500. Protects against dust and dirt. Cover is vented to allow for evaporation & circulation and may allow some rain to get through. Dimensions are 66" wide X 31" deep.

#7553 - Weber 7553 - 61" Premium Grill Cover
Weber 7553 premium grill cover. Heavy-duty vinyl custom fit for Weber Genesis E-300 and S-300 models. Dimensions are 61" wide X 31" deep.

#7554 - Weber 7554 - 67" Premium Grill Cover For Summit 400 Series Models
Weber 7554 Premium Grill Cover. Heavy-duty vinyl custom fit for Summit E-400 or S-400 series gas grills. Dimensions are 67 inches wide X 31 inches deep. Cover is top vented to allow for evaporation and air circulation.

#7555 - Weber 7555 - 76" Premium Grill Cover For Summit 600 Series Models
Weber 7555 premium grill cover. Heavy-duty vinyl custom fit for Weber Summit E-600 and Summit S-600 grill models. Dimensions are 76" wide X 31" deep.

#7573 - Weber 7573 - 53" Premium Grill Cover
Weber 7573 premium grill cover. Heavy-duty vinyl custom fit for Spirit 200/300, Spirit 500/700, Genesis 1000, Genesis Silver A/B and Weber 900. Dimensions are 53" wide X 25-1/2" deep.

#85897 - Weber Bottom Tray for Silver A and Spirit 500 Models
Aluminum bottom slide out tray. Top tray measurement is 9-3/8" X 16-3/4". Fits Silver A and Weber Spirit 500 model grills.

#9054 - Weber Replacement Torch Wick Set
Package contains two torch wicks. Wick dimensions are 3/4" in diameter X 8" long. Original Weber wicks are no longer available. These are fiberglass hurricane lamp wicks of the same dimension as the original Weber wicks.

#9815 - Weber Thermometer
Fits Spirit, Genesis, Platinum Series II, Master Touch and all Performer grills. 5-1/2" probe mounts through the holder on the grill. May also be used as a stand alone thermometer to check internal meat temperature.

Weber Shelves and Wheels

#3620 - Weber 6" Wheel
Weber plastic wheel with axle hub cap. Wheel is 6" in diameter. Fits most charcoal kettle grills except Performer and Ranch Series.

#3626 - Weber Genesis Gas Grill - Durawood Table - Swing Up Table
Weber Genesis 1000-5500, Platinum I and II, Spirit 700 Gas Grills - Durawood Swing Up Table. Includes mounting hardware. Measures 11"x16".

#51407 - Weber Q200 Side Shelf
Black plastic side shelf for Weber Q200. Shelf measures approximately 11" across the center front to back X 12" across the center side to side. Fits right or left side.

#51408 - Weber Q200 Printed Right Side Shelf
Black plastic side shelf for Weber Q200/Q220. Fits the right side of the grill and is printed with lighting instructions. Shelf measures approximately 11" across the center front to back X 12" across the center side to side.

#6414 - Weber 2" Caster and Leg Insert
Combination caster and insert. Caster is 2" in diameter and features the wheel locking mechanism. Fits Spirit, Genesis, Platinum, Silver, Gold, Ranch Kettle and Performer models.

#99252 - Weber 8" Plastic Wheel Set
Set of two Genesis and Spirit 8" plasic wheels. Axle hole measures 3/8". Light grey Weber brand name detail. Includes axle retaining caps.

Weber Charcoal Kettles

#60701 - Weber Ash Pan Support Clips
Set of three of the leg clips that support the ash pans on 18-1/2" and 22-1/2" kettles.

#7403 - Weber Charcoal Briquet Holder Basket Set
Briquet holder baskets make indirect cooking easier. Includes two baskets and instruction sheet.

#7409 - Weber 22-1/2" Kettle One Touch Cleaning System Kit
Fits 22-1/2" "One Touch" Silver, Performer and Master-Touch Kettles. Easy assembly required.

#7413 - Weber 7413 Work Table (Fits Kettle Charcoal Grills)
Heavy duty thermal plastic side table mounts easily onto your 18-1/2" and 22-1/2" Weber charcoal grill. Adjustable leg height. Three molded tool hooks.

#80673 - Weber 11" Diameter Ash Catcher Pan For 18 Inch Kettles
Fits Weber 18" Kettles. Ash catcher pan. Pan measures 11" in diameter. Includes set of 3 leg pan support clips.

#80681 - Weber 13-1/2" Diameter Ash Catcher Pan For 22 Inch Kettles
Fits Weber 22" Kettles. Ash catcher pan. Pan measures 13-1/2" in diameter. Includes set of 3 leg pan support clips.

#90719 - Weber 18-1/2" Kettle One Touch Cleaning System Kit
Fits 18-1/2" "One Touch" Gold, "One Touch" Deluxe/Platinum and Performer Kettles. Easy assembly required, instructions included.

	Weber Gas Grill Parts Listing by Category
Weber Gas Grill Model Help \| Weber Gas Grill Model List

Weber Gas Grill Parts Listing by Category