Alfresco Grill Parts

grill parts: Automatic Gas Timer - Shut Off Valve - (1 to 3hrs.)
Alfresco grill parts: Automatic Gas Timer - Shut Off Valve - (1 to 3hrs.) (image #1) Alfresco grill parts: Automatic Gas Timer - Shut Off Valve - (1 to 3hrs.) (image #2) Alfresco grill parts: Automatic Gas Timer - Shut Off Valve - (1 to 3hrs.) (image #3) Alfresco grill parts: Automatic Gas Timer - Shut Off Valve - (1 to 3hrs.) (image #4)

Automatic Gas Timer - Shut Off Valve - (1 to 3hrs.)

Item# 3090
This part is in stock. IN STOCK
Retail: $102.00
$91.80

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

  • This timer accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
  • Installation/operating instructions.

Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

  • Qty:
Item# ALFU1

Alfresco Center Feed “U” Shaped Stainless Steel Tube Burner, a high-quality replacement for Alfresco OEM burner parts 290-0038 and 510-0025. Features an Air/fuel mixture adjustment shutter for precise control and crafted from durable stainless steel construction for longevity. This 18-1/4in. x 7-3/4in. burner fits Alfresco AGBQ models and retrofits ALX2 and ALXE models. Restore Your Grill's Heat Efficiency!

Are you experiencing uneven heat distribution on your BBQ grill? Replace your burner with a new Alfresco Center Feed "U" Shaped Stainless Steel Tube Burner. Over time, your grill's original burners can become blocked, cracked, or rusted, leading to uneven heat and reduced efficiency. Don't compromise on your grilling experience. Replace your old burners with this U-shaped stainless steel burner to enjoy consistent surface heat, just like when your grill was new.

Fits the following Models:

  • Alfresco AGBQ models
  • Retrofits to older ALX2 and ALXE models
  • Replaces Alfresco OEM parts 290-0038 and 510-0025

Included:

  • 1 U-Tube Stainless Steel Burner
  • Attached flame crossover tube
  • Burner stabilizer bracket with mounting post

Key Features:

  • Air/fuel mixture adjustment shutter for precise control
  • Durable stainless steel construction for longevity

Dimensions:

  • Burner Dimensions: 18-1/4in. x 7-3/4in. Distance between the venturi/valve end of the burner to the center of the mounting post: 14-7/8in.

Upgrade your grill's performance and safety with the Alfresco Center Feed "U" Shaped Stainless Steel Tube Burner. Say goodbye to hotspots and hello to perfectly cooked meals every time you fire up your grill.

In Stock
Retail: $119.35
$76.50
View
Add
Item# 41648

48 count, high quality kiln dried Pyramid Ceramic Briquettes, each measuring 2in. x 2in. for a total of 192 sq. in. coverage. These high-performance briquettes feature a pyramid shape and hollowed core to increase radiant heat distribution. For use with briquette trays and racks, or an upgrade for grills that utilize lava rock grates.

Are your briquettes broken, cracked or caked with grease and contaminants?  These premium briquettes allow maintaining stable cooking temperatures with less gas, while protecting your burners.  Ceramic pyramid briquettes vaporize drippings from food, enchanting the flavor of your grilled dishes by creating flavorful smoke and vapor that infuse into the food.

What’s Included:

  • 48 - Pyramid Shaped Ceramic Briquettes, 2in. x 2in.  (192 sq. in. coverage).

Compatibility:

  • For use with Briquette Trays that utilize 2in. x 2in. briquettes, such as Lynx, Alfresco, Dynasty, GE Monogram and more.
  • A serious upgrade from Lavarock; distribute briquettes evenly on grills that utilize heat grates.

High performance pyramid briquettes are a popular choice for many grillers seeking improved heat control, flavor enhancement, and extended grill life.

In Stock
Retail: $94.30
$55.99
View
Add
Item# ALFBT1

Premium Stainless Steel Briquette Tray, designed to hold 24 ceramic briquettes (sold separately). Crafted from high-quality 304 grade stainless steel for durability and longevity. This tray is a direct replacement for Alfresco OEM Part 510-0005, ensuring a perfect fit.

Is your heat distribution briquette tray warped, rusted, and unsanitary? Upgrade to a brand new Stainless Steel Briquette Tray, designed to hold 24 ceramic briquettes (sold separately) and provide even heat distribution, while rejuvenating the hygiene of your grill. 

Key Features:

  • Premium Stainless Steel: Crafted from high-quality 304 grade stainless steel for durability and longevity.
  • Dimensions: Measuring 17-3/16in. x 12-3/4in., accommodates 24 briquettes (sold separately).
  • Made in the U.S.A.: This product is proudly manufactured in the United States.

What's Included:
• 1 Stainless steel heat plate/briquette holder tray
• Note: Briquettes are not included; this listing is for the tray only.

Compatibility:

  • Fits seamlessly with Alfresco AGBQ models and other makes/models that accept a 17-3/16in. x 12-3/4in. heat shield/heat distribution tray.
  • Directly replaces Alfresco OEM Part 510-0005 for hassle-free installation.

Revive your grill's performance and ensure even heat distribution with a new Alfresco Stainless Steel Briquette Tray. Premium construction ensures long-lasting use. Don’t forget to inspect and replace your ceramic briquettes to further freshen-up your grilling experience.

In Stock
Retail: $131.25
$75.88
View
Add
Item# ALFBT2

Premium Stainless Steel Briquette Tray, designed to hold 24 ceramic briquettes (sold separately).  Crafted from 304 grade high-quality stainless steel for durability and longevity. This tray is a direct replacement for Alfresco ALX2 models OEM Part 100-1132, ensuring a perfect fit.

Is your heat distribution briquette tray warped, rusted, and unsanitary? Upgrade to a brand new Stainless Steel Briquette Tray, designed to hold 24 ceramic briquettes (sold separately) and provide even heat distribution, while rejuvenating the hygiene of your grill.

Key Features:

  • Premium Stainless Steel: Crafted from 304 grade high-quality stainless steel for durability and longevity.
  • Dimensions: 17-7/8in. x 12-5/8in., accommodates 24 briquettes (sold separately).
  • Made in the U.S.A.: This product is proudly manufactured in the United States.

What's Included:

  • 1 Stainless steel heat plate/briquette holder tray.
  • Note: Briquettes are not included; this listing is for the tray only.

Compatibility:

  • Fits seamlessly with Alfresco ALX2 models and other makes/models that accept a 17-7/8in. x 12-5/8in. heat shield/heat distribution tray. Directly replaces Alfresco OEM Part 100-1132 for hassle-free installation.

Revive your grill's performance and ensure even heat distribution with a new Alfresco Stainless Steel Briquette Tray. Premium construction ensures long-lasting use. Don’t forget to inspect and replace your ceramic briquettes to further freshen-up your grilling experience.

In Stock
Retail: $120.75
$72.20
View
Add
Item# ALFBT3

Premium Stainless Steel Briquette Tray crafted from high-quality 304 grade stainless steel for durability and longevity, paired with 18 top-quality kiln dried Pyramid Ceramic Briquettes. This combination is a direct replacement for Alfresco OEM Part 510-0677, ensuring a perfect fit.

Is your heat distribution briquette tray warped, rusted, and unsanitary? Are your Briquettes cracked, broken and caked with grease and contaminants? Upgrade to a brand new Stainless Steel Briquette Tray that includes Briquettes and provides even heat distribution, while rejuvenating the hygiene of your grill. 

Key Features:

  • Comes completely assembled.
  • Premium Stainless Steel: Crafted from high-quality 304 grade stainless steel for durability and longevity.
  • Removeable rails that enable easy briquette replacement.
  • 18 High Quality Ceramic Briquettes.
  • Dimensions: 17-7/8in. x 10-5/8in.
  • Made in the U.S.A.: This product is proudly manufactured in the United States.

What's Included:

  • 1 Stainless steel heat plate/briquette holder tray.
  • 18 High Quality Kiln Dried Ceramic Briquettes.

Compatibility:

  • Fits most Alfresco ALXE 36 inch grill models and other makes/models that accept a 17-7/8in. x 10-5/8in. heat shield/heat distribution tray. Measure before ordering.
  • Directly replaces Alfresco OEM Part 510-0677 for hassle-free installation.

Revive your grill's performance and ensure even heat distribution with a new Alfresco Stainless Steel Briquette Tray and high-quality ceramic briquettes. Premium construction ensures long-lasting use.

In Stock
Retail: $262.50
$162.75
View
Add
Item# BQLYX

28 count, high quality kiln dried Pyramid Ceramic Briquettes, each measuring 2in. x 2in. for a total of 112 sq. in. coverage. These high-performance briquettes feature a pyramid shape and hollowed core to increase radiant heat distribution. For use with briquette trays and racks, or an upgrade for grills that utilize rock grates.

Are your briquettes broken, cracked or caked with grease and contaminants? These premium briquettes allow maintaining stable cooking temperatures with less gas, while protecting your burners.  Ceramic pyramid briquettes vaporize drippings from food, enchanting the flavor of your grilled dishes by creating flavorful smoke and vapor that infuse into the food.

What’s Included:

  • 28 - Pyramid Shaped Ceramic Briquettes, 2in. x 2in.  (112 sq. in. coverage).

Compatibility:

  • For use with Briquette Trays that utilize 2in. x 2in. briquettes, such as Lynx, Alfresco, Dynasty, GE Monogram and more.
  • A serious upgrade from Lavarock; distribute briquettes evenly on grills that utilize heat grates.

High performance pyramid briquettes are a popular choice for many grillers seeking improved heat control, flavor enhancement, and extended grill life.

In Stock
Retail: $55.00
$30.70
View
Add
Item# DPA34

69 count, genuine Broilmaster Ceramic Briquettes, each measuring 2in. x 2in. for a total of 276 sq. in. coverage. Broilmaster briquettes feature a dome shape to help with self-cleaning properties and increase radiant heat distribution. For use with briquette trays and racks that utilize a 2in. x 2in. briquette, or an upgrade for grills that utilize lava rock grates.

Are your briquettes broken, cracked or caked with grease and contaminants? Maybe you’ve been using lava rock and you’re ready to up your grill game? These premium briquettes allow maintaining stable cooking temperatures with less gas, while protecting your burners.  Ceramic briquettes vaporize drippings from food, enchanting the flavor of your grilled dishes by creating flavorful smoke and vapor that infuse into the food.

What’s Included:

  • 69 - Genuine Broilmaster Ceramic Briquettes, 2in. x 2in.  (192 sq. in. coverage).

Compatibility:

  • For Broilmaster and other Brands that utilize heat grates with lava rock or briquettes. A serious upgrade from Lava rock; distribute briquettes evenly for exceptional performance.
  • For use with Briquette Trays that utilize 2in. x 2in. briquettes, such as gas grills by Lynx, Alfresco, Dynasty, GE Monogram and more.

Broilmaster briquettes are a popular, economical choice for many grillers seeking improved heat control, flavor enhancement, and extended grill life.

In Stock
Retail: $29.00
$26.10
View
Add
Item# CG103SS

Heavy duty, Solid Stainless Steel Rod Cooking Grate. High quality 3/8" diameter solid stainless rod construction for a lasting cooking surface.  Replaces Alfresco OEM Part 290-0033, and fits a variety of Alfresco models as well as other brands. Sold individually, more than one required. 

Freshen up your grilling experience! Replace your cooking grates where the meat greets the heat with these sleek, shiny, and robust solid stainless steel rod grates. Rust-resistant and easy to clean, these heavy duty stainless steel Alfresco grates make perfect sear marks and are great for everyday grilling for many seasons to come.

What’s Included:

  • 1 Solid Stainless Steel 3/8in. Rod Cooking Grate - (19-1/4in. x 13-5/8in.).
  • Sold Individually, more than 1 required depending on grill size.

Compatibility:

  • Fits a variety of Alfresco models as well as other Brands and models.
  • Measure existing grates before ordering: 19-1/4in. x 13-5/8in.
  • Directly replaces Alfresco OEM Part 290-0033 for hassle-free installation.
In Stock
Retail: $251.30
$138.15
View
Add
Item# CG104SS

Heavy duty, Solid Stainless Steel Rod Cooking Grate. High quality 3/8" diameter solid stainless rod construction for a lasting cooking surface.  Replaces Alfresco OEM Part 290-0058, and fits a variety of Alfresco models as well as other brands. Sold individually, more than one required. 

Freshen up your grilling experience! Replace your cooking grates where the meat greets the heat with these sleek, shiny, and robust solid stainless steel rod grates. Rust-resistant and easy to clean, these heavy duty stainless steel Alfresco grates make perfect sear marks and are great for everyday grilling for many seasons to come.

What’s Included:

  • 1 Solid Stainless Steel 3/8in. Rod Cooking Grate - (19-1/4in. x 12in.).
  • Sold Individually, more than 1 required depending on grill size.

Compatibility:

  • Fits a variety of Alfresco models as well as other Brands and models.
  • Measure existing grates before ordering: 19-1/4in. x 12in.
  • Directly replaces Alfresco OEM Part 290-0058 for hassle-free installation.
In Stock
Retail: $251.30
$138.15
View
Add
Item# CG105SS

Heavy duty, Solid Stainless Steel Rod Cooking Grate. High quality 3/8" diameter solid stainless rod construction for a lasting cooking surface.  Replaces Alfresco OEM Part 290-0124, and fits a variety of Alfresco models as well as other brands. Sold individually, more than one required. 

Freshen up your grilling experience! Replace your cooking grates where the meat greets the heat with these sleek, shiny, and robust solid stainless steel rod grates. Rust-resistant and easy to clean, these heavy duty stainless steel Alfresco grates make perfect sear marks and are great for everyday grilling for many seasons to come.

What’s Included:

  • 1 Solid Stainless Steel 3/8in. Rod Cooking Grate - (18-7/8in. x 12-11/16in.).
  • Sold Individually, more than 1 required depending on grill size.

Compatibility:

  • Fits a variety of Alfresco models as well as other Brands and models.
  • Measure existing grates before ordering: 18-7/8in. x 12-11/16in.
  • Directly replaces Alfresco OEM Part 290-0124 for hassle-free installation.
In Stock
Retail: $237.25
$128.90
View
Add
Item# CG106SS

Heavy duty, Solid Stainless Steel Rod Cooking Grate. High quality 3/8" diameter solid stainless rod construction for a lasting cooking surface.  Replaces Alfresco OEM Part 290-0157, and fits a variety of Alfresco models as well as other brands. Sold individually, more than one required. 

Freshen up your grilling experience! Replace your cooking grates where the meat greets the heat with these sleek, shiny, and robust solid stainless steel rod grates. Rust-resistant and easy to clean, these heavy duty stainless steel Alfresco grates make perfect sear marks and are great for everyday grilling for many seasons to come.

What’s Included:

  • 1 Solid Stainless Steel 3/8in. Rod Cooking Grate - (18-7/8in. x 11-3/4in.).
  • Sold Individually, more than 1 required depending on grill size.

Compatibility:

  • Fits a variety of Alfresco models as well as other Brands and models.
  • Measure existing grates before ordering: 18-7/8in. x 11-3/4in.
  • Directly replaces Alfresco OEM Part 290-0157  for hassle-free installation.
In Stock
Retail: $237.25
$128.90
View
Add
Item# CG118SS

Heavy duty, Solid Stainless Steel Rod Cooking Grate. High quality 3/8" diameter solid stainless rod construction for a lasting cooking surface.  Replaces Alfresco OEM Part 290-0348, and fits a variety of Alfresco models as well as other brands. Sold individually, more than one required. 

Freshen up your grilling experience! Replace your cooking grates where the meat greets the heat with these sleek, shiny, and robust solid stainless steel rod grates. Rust-resistant and easy to clean, these heavy duty stainless steel Alfresco grates make perfect sear marks and are great for everyday grilling for many seasons to come.

What’s Included:

  • 1 Solid Stainless Steel 3/8in. Rod Cooking Grate - (18-7/8in. x 10-3/8in.).
  • Sold Individually, more than 1 required depending on grill size.

Compatibility:

  • Fits a variety of Alfresco models as well as other Brands and models.
  • Measure existing grates before ordering: 18-7/8in. x 10-3/8in.
  • Directly replaces Alfresco OEM Part 290-0348 for hassle-free installation.
In Stock
Retail: $233.75
$140.75
View
Add
Item# 02342

Attractive black and chrome heat/gas Control Knob measures 2-5/16in. (dia. at base). Replaces an existing damaged, worn or broken heat control knob on bbq gas grills. Fit Kit included to secure knob to  6mm or 8mm “D” shaped gas valve stems at the proper stand-off height.

What’s Included:

  • 1 Chrome and Black Gas Control Knob (plastic)
  • 1 Fit Kit for proper installation (6 pc.)

Features:

  • Attractive and easy-to-clean chrome heat control knob
  • Fits 6mm or 8mm “D” shaped gas control valve stems
  • 6 inserts to insure proper mounting to a variety of BBQ Gas Grills

Fitment:

  • Fit Kit includes 6pc. inserts that allow for selecting knob "ON/OFF" position and a set screw with locking pressure tab.
  • Variety of insert lengths for proper stand-off height: Flush, 1/4in., 1-1/2in. Inserts can be trimmed to your desired length for a professional fit.
  • Click PDF in preview window for assembly instructions.
In Stock
Retail: $19.55
$10.45
View
Add
Item# 1769-89

Heavy duty "L" shaped, main burner Electrode. Features a 1-1/2in. long white ceramic insulator with mounting bracket, flat male spade terminal end for the wire connection and a 90 degree bend electrode tip.  Quality aftermarket part. (Electrode Only, see Item #IG50 for Collector Box, sold separately).

Why do you need a new Electrode? Over time, grease, food residue, and other contaminants can build upon the electrodes, hindering their ability to generate a spark and ignite gas. Electrodes can wear out over time due to exposure to heat and corrosion. Replace your electrodes if they are visibly damaged, worn and can no longer be cleaned/serviced.

Included:

  • 1 L-shaped Electrode (Replaces Alfresco OEM Part 210-0189)

Fits the following Alfresco Models: 
AGBQ-30, AGBQ-30C, AGBQ-30CD, AGBQ-30IR, AGBQ-30IRC, AGBQ-30SZ, AGBQ-30SZC, AGBQ-42, AGBQ-42C, AGBQ-42SZ, AGBQ-42SZC, AGBQ-56, AGBQ-56BFG, ALX2-30, ALX2-30C, ALX2-30CD, ALX2-30IR, ALX2-30IRC, ALX2-30IRCD, ALX2-30SZ, ALX2-30SZC, ALX2-30SZCD, ALX2-42, ALX2-42C, ALX2-42RFG, ALX2-42SZ, ALX2-42SZC, ALX2-42SZRFG, ALX2-56, ALX2-56BFG, ALX2-56BFGC, ALX2-56BFGR, ALX2-56C, ALX2-56SZ, ALX2-56SZC, ALX242SZL 

In Stock
$20.59
View
Add
Item# 1851-16

Two output Quikliter electronic ignition module, powered by a single “AA” battery. 3-7/8in. x 1-7/8in. mounting plate included (pre-attached). The module features a battery chamber cap, two output color coded male flat spade terminals (for the electrodes) and two input male flat spade terminals (for the ignition switch). Replaces Alfresco OEM Part 2011-23, and other Brands and Models. 

When an electronic ignition module fails, it typically results in the inability to ignite the grill's burners with the push of a button or turn of a knob. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Over time, outdoor elements and the heat of the grill wreak havoc on the materials and components used in the module and cause failure. Replace your ignition module and light your way to a better grilling experience!

Includes:

  • 1 Two output Quikliter electronic ignition module. 
  • Mounting Plate with 4 holes, module pre-attached.
  • Igniter includes battery Cap
  • Requires 1 AA Battery (AA battery not included)

Fitment:

  • Replaces Alfresco OEM Part 2011-23, and other Brands and Models such as Viking.
  • Note: For Alfresco Model LX2 with a "diagonal" mounting plate, modifications to the location of the screw holes will be required.
In Stock
$25.39
View
Add
Item# 1851-17

Four output Quikliter electronic ignition module, powered by a single “AA” battery. 4-3/4in. x 1-7/8in. mounting plate included (pre-attached). The module features a battery chamber cap, four output color coded male flat spade terminals (for the electrodes) and two input male flat spade terminals (for the ignition switch). Replaces Alfresco OEM Part  2011-24, and other Brands and Models. 

When an electronic ignition module fails, it typically results in the inability to ignite the grill's burners with the push of a button or turn of a knob. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Over time, outdoor elements and the heat of the grill wreak havoc on the materials and components used in the module and cause failure. Replace your ignition module and light your way to a better grilling experience!

Includes:

  • 1 Four output Quikliter electronic ignition module. 
  • Mounting Plate with 4 holes, module pre-attached.
  • Igniter includes battery Cap
  • Requires 1 AA Battery (AA battery not included)

Fitment:

  • Replaces Alfresco OEM Part 2011-24, and other Brands and Models such as Viking.
In Stock
$26.39
View
Add
Item# IG43B

19in. long ignition wire with one end being a larger 1/4in. female spade terminal connector, and at the other end a smaller 1/8in. female flat spade terminal connector. Features clear plastic terminal protectors. Used for spark generator to electrode connections and electronic ignition module to push button switch connections.

Is your spark loosing juice? Check your ignition wires for any visible signs of damage. Look for fraying, cuts, or breaks in the wire insulation, or the wire itself. Check for any corrosion or rust on the connectors or terminals. Look for areas where the wire may have become worn along its path and is “shorting out” on the grill body or other component.  Test Continuity: Using a multimeter set to measure continuity or resistance. Touch one probe to each end of the wire, and if there's continuity, the multimeter should display a low resistance value (usually close to zero ohms). If there's no continuity or a high resistance value, it indicates a break in the wire.

Includes:

  • (1) 19in. long ignition wire with a 1/8in. female spade connector and a 1/4in. spade connector with terminal covers.

Fitment:

  • This wire fits Alfresco spark generator to electrode connections and DCS electronic ignition module to push button switch connections, but may also work for a variety of other Brands and Models.
  • Fits Viking Models: DVGBQ4103RT, DVGBQ4122RT, DVGBQ5304RT, DVGBQ5323RT, VGBQ4103RT, VGBQ1422RT, VGBQ5304RT, VGBQ532T, VGIQ410, VGIQ5323RT
In Stock
Retail: $12.85
$7.33
View
Add
Item# IG50

Collector Box/Shield for main burner igniter electrode. L-shaped Collector Box with 1in. channels and an overall dimension of 3in. x 2-1/4in. Constructed of high quality 304 Grade stainless steel for long life. Features a mounting bracket/tab with a single screw hole. 

Why a new Collector Box? During the ignition process, if the burner fails to ignite, the unburned gas flows into the gas collector box instead of lingering around the burner. This reduces the risk of a sudden ignition or flare-up when the burner is eventually ignited. Gas collector boxes need to be replaced if they become loose, damaged or badly corroded.

Includes:

  • 1 Collector Box/Shield, Stainless Steel, 3in. x 2-1/4in.
  • Replaces Alfresco OEM Part 100-1848.
  • Electrode sold separately, see Item #1769-89

Fits the following Alfresco Models: 
AGBQ-30, AGBQ-30C, AGBQ-30CD, AGBQ-30IR, AGBQ-30IRC, AGBQ-30SZ, AGBQ-30SZC, AGBQ-42, AGBQ-42C, AGBQ-42SZ, AGBQ-42SZC, AGBQ-56, AGBQ-56BFG, ALX2-30, ALX2-30C, ALX2-30CD, ALX2-30IR, ALX2-30IRC, ALX2-30IRCD, ALX2-30SZ, ALX2-30SZC, ALX2-30SZCD, ALX2-42, ALX2-42C, ALX2-42RFG, ALX2-42SZ, ALX2-42SZC, ALX2-42SZRFG, ALX2-56, ALX2-56BFG, ALX2-56BFGC, ALX2-56BFGR, ALX2-56C, ALX2-56SZ, ALX2-56SZC, ALX242SZL

In Stock
Retail: $40.45
$25.65
View
Add
Item# 100700-168

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

  • (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.
In Stock
$76.99
View
Add
Item# 103291-120

Genuine Weber® Grills Quality Part. 10 foot length of 1/2in. ID flexible Stripwound gas hose and Quick Connect kit with 1/2in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 10ft. of 1/2in. ID flexible Stripwound gas hose with 1/2in. fittings.
  • Quick Connect Fittings: Includes a 1/2in. Quick Connect fitting (that screws onto a 1/2in. NPT male pipe thread) and a 1/2in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

Fitment:

  • Weber: Important: This hose assembly fits Weber Models with 1/2in. fittings only. DOES NOT FIT grills with 3/8in. fittings (see Item# 82185 for proper part). Please confirm your size before ordering. Fits Most Weber Models, including but not limited to; Genesis models with 1/2in. fittings, Summit 400 and 600, Summit Gold A and Platinum.
  • Fits Many Other Brands: Alfresco, Broilmaster, Broilmaster 3x and 4x, Twin Eagles, Viking, Wolf and others that are equipped with 1/2in. SAE fittings.
In Stock
$69.99
View
Add
Item# 104007

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Female threaded (3/8in. FNPT) end fits onto 3/8in. fixed supply line.

What’s Included:

  • 1 On/Off Ball Valve Quick Connect Fitting
  • Includes Female threaded (3/8" FNPT) end fits onto 3/8" fixed supply line, Quick Connect coupler at other end.
In Stock
$32.99
View
Add
Item# 104023

1/2in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Sizing:

  • 3/4in. ID end opening (1/2in. FNPT). Used with 1/2in. ID gas hose. ANSI certified for natural (NG) and propane (LP) gas use.

What’s Included:

  • 1 On/Off Ball Valve Quick Connect Fitting, 3/4in. ID end opening (1/2in. FNPT) and Quick Connect Coupler
In Stock
$49.99
View
Add
Item# 104088

1/2in. Quick Connect Fitting for use with 1/2in. ID gas hose. 3/4in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other medium BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick Connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 1/2" Gas Line Quick Connect Fitting
In Stock
Retail: $32.00
$27.79
View
Add
Item# 104406

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 3/8" Gas Line Quick Connect Fitting
In Stock
$23.34
View
Add
Item# 106238-30

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

  • 2-Stage Regulator and 30in. Hose Assembly which includes:
  • 3/8in. ID high pressure hose, 30in. length.
  • 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
  • One 3/8in. to 3/4in. brass adapter included.  
In Stock
$49.99
View
Add
Item# 3090

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

  • This timer accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
  • Installation/operating instructions.
In Stock
Retail: $102.00
$91.80
View
Add
Item# 3090-01

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

  • 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.
In Stock
Retail: $20.00
$18.00
View
Add
Item# 3092

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

  • Accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer Assembly, 20/40/60min. durations. 
  • Installation/operating instructions.
In Stock
Retail: $102.00
$91.80
View
Add
Item# 3092-01

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

  • 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.
In Stock
Retail: $26.00
$23.40
View
Add
Item# 5520-11T

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

  • 20/40/60 minute interval gas valve timer.
  • 100,000 BTU rating.
  • Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

  • Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
  • Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
  • Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
  • Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

  • Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
  • Installation and operating instructions.
  • Quality FireMagic Part.
In Stock
Retail: $247.00
$222.30
View
Add
Item# 5520-13T

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

  • 1-2-3 hour interval gas valve timer.
  • 100,000 BTU rating.
  • Natural Gas or Propane.

Mounting Panel Box:

  • Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
  • Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
  • Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
  • Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
  • Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

  • Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
  • Installation and operating instructions.
  • Quality FireMagic Part.
In Stock
Retail: $239.00
$215.10
View
Add
Item# 65909

5/16in. ID propane/LP gas hose in 30 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 30in. hose 3/8in. fitting, with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet
In Stock
Retail: $39.89
$31.25
View
Add
Item# 65941

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Replaces #7502 Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • 1 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Genuine Weber Part. 
In Stock
Retail: $35.29
$33.00
View
Add
Item# 99281

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Genuine Weber Part. 
In Stock
Retail: $36.99
$34.95
View
Add
Item# HR4B

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality aftermarket part at a cost effective price.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace your faulty regulator and hose with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly from Grillparts.com today!

What’s Included:

  • (1) 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Quality aftermarket part.
In Stock
Retail: $37.65
$28.20
View
Add
Item# HR5B

5/16in. ID propane/LP gas hose. 2 (dual) 22 inch length hoses with a brass 3/8in. female hex nut flare connectors, assembled to a single propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Created for gas grills requiring a second feed hose for a side burner, etc. 

Are your gas lines cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) Dual Hose Regulator Assy, with (2) 5/16in. x 22in. hoses with single attached regulator with integrated QCC1 to-tank connection.
  • Instruction sheet.
In Stock
Retail: $68.25
$39.38
View
Add
Item# HR7B

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower price point than Weber #99281.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Quality aftermarket part.
In Stock
Retail: $43.20
$28.86
View
Add
Item# NG10

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 10ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $82.99
$54.04
View
Add
Item# NG12

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 12ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $86.99
$60.94
View
Add
Item# NG14

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 14ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $93.99
$65.84
View
Add
Item# PR-SU

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

  • Convertable to/from Natural Gas to/from Propane Gas Regulator
  • 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
  • Rated 1/2 PSIG.  
In Stock
$20.59
View
Add
Item# RGB

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

In Stock
Retail: $11.35
$7.95
View
Add