19in. long ignition wire with one end being a larger 1/4in. female spade terminal connector, and at the other end a smaller 1/8in. female flat spade terminal connector. Features clear plastic terminal protectors. Used for spark generator to electrode connections and electronic ignition module to push button switch connections.

Is your spark loosing juice? Check your ignition wires for any visible signs of damage. Look for fraying, cuts, or breaks in the wire insulation, or the wire itself. Check for any corrosion or rust on the connectors or terminals. Look for areas where the wire may have become worn along its path and is “shorting out” on the grill body or other component.  Test Continuity: Using a multimeter set to measure continuity or resistance. Touch one probe to each end of the wire, and if there's continuity, the multimeter should display a low resistance value (usually close to zero ohms). If there's no continuity or a high resistance value, it indicates a break in the wire.

Includes:

• (1) 19in. long ignition wire with a 1/8in. female spade connector and a 1/4in. spade connector with terminal covers.

Fitment:

• This wire fits Alfresco spark generator to electrode connections and DCS electronic ignition module to push button switch connections, but may also work for a variety of other Brands and Models.
• Fits Viking Models: DVGBQ4103RT, DVGBQ4122RT, DVGBQ5304RT, DVGBQ5323RT, VGBQ4103RT, VGBQ1422RT, VGBQ5304RT, VGBQ532T, VGIQ410, VGIQ5323RT