Gas Grill Burners

grill parts: 20-1/2" X 6-1/4" Rectangular Cast Iron Burner
Gas Grill Burners grill parts: 20-1/2" X 6-1/4" Rectangular Cast Iron Burner (image #1) Gas Grill Burners grill parts: 20-1/2" X 6-1/4" Rectangular Cast Iron Burner (image #2) Gas Grill Burners grill parts: 20-1/2" X 6-1/4" Rectangular Cast Iron Burner (image #3) Gas Grill Burners grill parts: 20-1/2" X 6-1/4" Rectangular Cast Iron Burner (image #4)

20-1/2" X 6-1/4" Rectangular Cast Iron Burner

Item# 23601
This part is in stock. IN STOCK
Retail: $171.43
$86.65
Rectangular cast iron burner. Burner measures 20-1/2" total length front to back (including shutter extension) X 6-1/4" wide. Fits some DCS models and also some Lynx model grills. Includes air mix shutter mounted as shown.

Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

  • Qty:
Item# DPP102
17 Inch stainless steel Broilmaster "Bowtie" burner. Fits D4, P4 and U4. IMPORTANT: Fits Model Years Prior To 2011 ONLY. Dimensions 9-1/2" X 17". Venturi tube drop (distance from the bottom of the burner to the bottom of the tubes) is 3-3/4". Venturi tube reach (distance from the end of the venturi tube to the center line of vertical pipe) is 4-3/4". MInor Assembly Required.
In Stock
Retail: $114.00
$102.60
View
Add
Item# DPP111
17 Inch stainless steel Broilmaster "Bowtie" burner. Fits "P3X and P4X" models.  IMPORTANT: Model Years 2011 And Newer.  Dimensions 9-1/2" X 17". Venturi tube drop (distance from the bottom of the burner to the bottom of the tubes) is 2-7/8". Venturi tube reach (distance from the end of the venturi tube to the center line of vertical pipe) is 6-3/4".  Features air adjustment shutters and spider screens on venturi pipe ends.  Gasket, screws and installation instructions included. MInor Assembly Required.
In Stock
Retail: $114.00
$102.60
View
Add
Item# B053791
17 Inch stainless steel Broilmaster "Bowtie" burner. Fits D5, P5, S5, S2 and Aspen. Dimensions 9-1/2" X 17". Tube drop (Distance from the bottom of the burner to the bottom of the tubes) is 4-1/2". The tube reach (distance from the end of the venturi tube to the center line of vertical pipe) is 4-7/8". Minor Assembly Required.  Genuine Broilmaster Part.
In Stock
Retail: $95.00
$85.50
View
Add
Item# WDSB7
Heavy Duty cast iron "Bowtie" burner assembly. Burner measures 17-1/4" long x 9-1/2" wide. Assembly includes dual straight 8-1/4" long venturi tubes with gasket and mounting screws. Fits Broilmaster G4, G5 and G1000 grills with dual post controls. MInor Assembly Required.
In Stock
Retail: $171.15
$77.55
View
Add
Item# WDSB8
Heavy Duty cast iron "Bowtie" burner assembly. Burner measures 17-1/4" long x 9-1/2" wide. Assembly includes dual curved venturi tubes with gasket and mounting screws. Fits Broilmaster S4, U4 and U5 models with dual up front controls. MInor Assembly Required.
In Stock
Retail: $171.15
$88.95
View
Add
Item# WSB13
Heavy Duty cast iron "Bowtie" burner assembly. Burner measures 17-1/4" long x 9-1/2" wide. Assembly includes single straight 8-1/4" long venturi tube with gasket and mounting screws. Fits Broilmaster G1000 grills with post control. MInor Assembly Required.
In Stock
Retail: $141.25
$78.97
View
Add
Item# DPP101
21" stainless steel "Bowtie" burner. Dimensions are 10-1/2" X 21-3/4". Fits Broilmaster Series 3 grills, D3, P3, S3 and Ducks Unlimited models. Venturi tube drop (distance from the bottom of the burner to the bottom of the tubes) is 3-3/4". Venturi tube reach (distance from the end of the venturi tubes to the center line of vertical pipes) is 4-3/4".   Quality aftermarket part, Broiilmaster no longer provides a 21-3/4" stainless Bowtie Burner. Minor Assembly Required.   IMPORTANT: Fits Model Years Prior To 2011 ONLY.
In Stock
Retail: $167.50
$90.08
View
Add
Item# WDLB7
Broilmaster/Warm Morning cast iron burner and venturi set (8-1/4" venturi tubes). For large dual post control grills. Venturi, Venturi Gasket and Screws Included. Fits Warm Morning G3T. Measures 21-3/4" X 10-3/4". MInor Assembly Required.
In Stock
Retail: $215.70
$98.90
View
Add
Item# WDLB8
Cast iron burner and twin curved venturi tube set. For large dual up front control grills D3, P3 and Ducks Ulimited. Burner dimensions are 10-3/4" X 21-3/4". Includes burner, venturi tubes and gasket. MInor Assembly Required.  Quality aftermarket part.
In Stock
Retail: $215.70
$132.20
View
Add
Item# HOLLBURN
Cast iron "main burner" for many Holland grill models. Measures 9-1/8" long X 3-5/8" wide. Features a 3-5/8" diameter round flame plate, mounting foot plate with 4 slots, air shutter with insect screen and threaded valve entry opening to secure the burner with air shutter to the valve.  Quality Aftermarket Part. Replaces OEM Parts HGP111050 and SG2-105.
In Stock
Retail: $68.25
$48.55
View
Add
Item# CIKR
12-3/4" long cast iron bar burner (length measurement is total, "tip to tip"). The width measured across the top of the burner is  2-1/8".  The venturi pipe extends 3-3/4" from the main burner body and has a 1/2" diameter hole for the gas valve orifice stem.  Features a "tapered barrel body" and a mounting peg that is 10-7/8" from the end of the venturi pipe (valve end) to the center of the peg.  Mounting cotter pin is included.  Fits many Brinkmann, Sears/Kenmore and other brands.
In Stock
Retail: $31.00
$20.25
View
Add
Item# CIKO
Cast iron wide oval shaped cast iron burner. Dimensions are 3-3/8" wide X 12-7/8" long total length. The top flat portion of this burner measures 9-3/4". Fits a variety of Sears Kenmore premium grill models.
In Stock
Retail: $37.10
$20.99
View
Add
Item# CIBM
13-1/2" long cast iron bar burner (length measurement is total, "tip to tip"). The width measured across the top of the burner is  2-1/4".  The venturi pipe extends 3-1/8" from the main burner body and has a 1/2" diameter hole for the gas valve orifice stem.  Features a centered mounting peg that is 12-3/16" from the end of the venturi pipe (valve end) to the center of the peg.  Mounting cotter pin is included.
In Stock
Retail: $35.40
$19.55
View
Add
Item# 80018594
Cast iron burner with tent shaped top. Porcelain coated for extended durability. Features air adjustment screw to adjust air/gas mixture. Measures 13-3/4" end to end.
In Stock
$22.95
View
Add
Item# 80001449S
Heavy duty cast iron replacement burner. Burner dimensions are 2-1/4" wide X 13-3/4" including the bottom side venturi tube length. Includes mounting pin clip.
In Stock
$21.55
View
Add
Item# CIDCH
Heavy duty cast iron replacement burner. Burner dimensions are 13-3/4" long X 2-1/4" wide, including the bottom side venturi tube length. Includes pin clip.  Replaces Charbroil OEM Parts 80001449, 80000023, 80010062 and G40100129001.
In Stock
Retail: $34.05
$21.55
View
Add
Item# CIKO2
Cast iron wide oval shaped cast iron burner. Dimensions are 3-3/8" wide X 14" long total length. The top flat portion measures 3-1/2" X 11". Fits a variety of Sears Kenmore premium grill models.
In Stock
Retail: $37.10
$20.99
View
Add
Item# 23211
Fire Magic cast iron bar burner. Overall end to end length is 14-7/8" X 1-1/2" wide across the top crown. Features tapered barrel-body with flared-bell venturi end and mounting end extension with offset mounting hole. Fits Fire Magic Regal 1 and Custom 1 Models.  Economical cast iron replacement for stainless steel OEM part 3042-40. 
In Stock
Retail: $47.70
$26.84
View
Add
Item# CICH
Cast iron burner with center slotted hole. Burner length including venturi tube is 15-1/4" and measures 3-1/2" wide. Includes mounting pin. Features air/gas adjustment locking screw at bottom of venturi end. Porcelain coated for extended durability.
In Stock
Retail: $40.35
$23.79
View
Add
Item# 80018595
Cast iron burner with an angled tent shaped top. Burner dimensions are 15-7/8" long X 2-1/4" wide. The length measurement includes the bottom venturi tube length. The mounting pin clip is included. IMPORTANT: Measurement from the end of the venturi (valve end) pipe to the center of the rear mounting peg (located on the bottom of the burner) is 15-1/4", please verify this dimension. (Product note: This slightly narrower burner economically replaces OEM 80018595.)
In Stock
$23.95
View
Add
Item# CIJA
Cast iron burner with an angled tent shaped top. Burner dimensions are 15-7/8" long X 2-1/4" wide. The length measurement includes the bottom venturi tube length. The mounting pin clip is included. IMPORTANT: Measurement from the end of the venturi (valve end) pipe to the center of the rear mounting peg (located on the bottom of the burner) is 15-1/4", please verify this dimension. (Product note: This slightly narrower burner economically replaces OEM 80018595.)
In Stock
Retail: $43.15
$23.95
View
Add
Item# CIT
Cast iron bar burner. Burner measures 15-7/8" long X 2-7/8" wide across the angled top portion.  Venturi pipe extends 1-7/8" past the body of the burner.  Features air/gas mixture adjustment locking screw at venturi end.  IMPORTANT: This burner has a 1/2" wide valve stem opening at the venturi end and the distance from the end of the venturi pipe to the center of the bottom mounting peg is 15-3/8". Mounting peg cotter pin included.
In Stock
Retail: $38.30
$26.55
View
Add
Item# CISC
Rectanglular cast iron burner. Fits Members Mark grills. Dimensions 4-3/4" wide X 15-3/4" total length.
In Stock
Retail: $48.45
$29.35
View
Add
Item# CIDCSLX
Rectangular cast iron burner. Burner measures 16" total length front to back (including shutter extension) X 6-1/4" wide. Fits a variety of DCS and LYNX models. Includes air/fuel mixture shutter, mounted as shown. Quality Aftermarket Part.
In Stock
Retail: $123.40
$70.65
View
Add
Item# CIT-L
Straight "rail" style cast iron burner. Dimensions are 2-3/8" across the top X 16-1/4" long. (Length measurement is total length tip to tip.)
In Stock
Retail: $40.35
$23.75
View
Add
Item# CIT-SG
Cast iron burner for Turbo Select models. Measures 16-3/8" from the mounting tip to end X 2-1/8" wide. 
In Stock
Retail: $38.80
$24.89
View
Add
Item# CIMF1
Cast iron bar burner. Measures 16-1/2" long (tip to tip, including the venturi pipe and mounting tab extensions) X 2-15/16" wide. Features a stainless steel 2 position (LP and NG) air mixture shutter with set screw and a back end mounting tab with centered hole. Fits a variety of Master Forge models.
In Stock
Retail: $55.85
$31.85
View
Add
Item# 23201
Fire Magic cast iron bar burner. Overall end to end length is 19" X 1-1/2" wide across the top crown. Features tapered barrel-body with mounting end extension that has an offset mounting hole and a flared-bell venturi end. Fits FireMagic Elite, Monarch, Regal 2, Custom 2 and Deluxe Models.  Economical cast iron replacement for stainless steel OEM part 3041-40.
In Stock
Retail: $61.21
$33.75
View
Add
Item# 23601
Rectangular cast iron burner. Burner measures 20-1/2" total length front to back (including shutter extension) X 6-1/4" wide. Fits some DCS models and also some Lynx model grills. Includes air mix shutter mounted as shown.
In Stock
Retail: $171.43
$86.65
View
Add
Item# 3042-50
FireMagic 14-1/2" X 6" cast stainless "E" burner for Aurora A430 and A540 models only.  Features an air mixture adjustment shutter, 2 burner mounting pegs on the underside and 4 cast-in vaporizing panel support legs on the top side.   Genuine Firemagic Part.
In Stock
Retail: $360.00
$324.00
View
Add
Item# CITSS
Cast stainless steel burner. Measures 15-7/8" long (tip to tip) X 2-5/8" wide across the angled top.  Venturi pipe extends 2-3/8" past the body of the burner.  Features a stainless steel air mixture adjustment shutter with insect screen and a rear mounting peg with cotter pin clip. Fits most Bull models as well as many other brands/models.  IMPORTANT: Measurement from the end of the venturi (valve end) pipe to the center of the rear mounting peg (located on the bottom of the burner) is 15-13/16", please verify this dimension. More than one required, sold individually. Quality Aftermarket Part.  Replaces Bull OEM Part 16516.
In Stock
Retail: $113.40
$68.59
View
Add
Item# CISC-SS
Cast stainless steel rectangular burner. Overall dimensions (including the mounting bracket and venturi pipe) are 15-7/8" long X 4-3/4" wide. The burner rectangle itself measures 12" long X 4-3/4" wide. Features a mounting peg with cotter pin on the underside of the mounting bracket, at the back end of the burner.
In Stock
Retail: $132.30
$84.99
View
Add
Item# BLZ-32-043

Genuine Blaze® Cast Stainless Steel Burner for Blaze® Grills Traditional 3, 4 and 5 Burner Models. Cast stainless steel construction for longevity and heat distribution and retention, proudly forged with Blaze® logo. Features a stainless steel air mixture adjustment shutter with insect screen, and rear mounting peg.

These Cast Stainless Steel Burners for Blaze® Grills aren't your run-of-the-mill grill components; they're the backbone of your outdoor cooking empire. Crafted with precision and durability in mind, these burners are like the Iron Man suits of the grilling world—sleek, powerful, and ready to take on whatever culinary challenge you throw their way. With their heavy-duty construction and superior heat retention, Blaze grills Cast Stainless Steel Burners ensure consistent cooking temperatures across the board, so you can kiss unevenly cooked meals goodbye. Whether you're searing up a steak or slow-roasting some veggies, these burner bad boys have got your back. A superior product for your premium Blaze Grill. 

Measurements:

  • IMPORTANT: Measurement from the end of the venturi (valve end) pipe to the center of the rear mounting peg (located on the bottom of the burner) is 15-15/16in., please verify this dimension.
  • Length: 16-1/8in.(Tip-to-tip)
  • Width: 2-5/8in. (Across the angled top)

What’s Included:

  • (1) Blaze® Cast Stainless Steel Burner - (16-1/8in. x 2-5/8in.)
  • Sold individually, more than one required
  • Genuine Blaze Grills OEM Part
In Stock
$109.81
View
Add
Item# 3041-50
FireMagic 17-1/2" X 6" cast stainless "E" burner for Echelon, Aurora and Magnum grills.  Fits all A530, A660, A790, E660, E790, E1060, Elite Magnum, Monarch Magnum and Regal 2 Magnum models.  Features an air mixture adjustment shutter, 2 burner mounting pegs on the underside and 4 cast-in vaporizing panel support legs on the top side.  Includes heat shield diverter and silicone gasket. Genuine Firemagic Part.
In Stock
Retail: $386.00
$347.40
View
Add
Item# AOGU1

American Outdoor Grill (AOG) Stainless Steel, 14-1/2in. x 6-7/8in. “U” Shape Center Feed Burner. A high quality replacement burner for AOG OEM Part 24-B-06.

Are you experiencing uneven heat distribution on your BBQ grill? Replace your burner with our AOG American Outdoor Grill Stainless Steel Burner. Over time, your grill's original burners become blocked, cracked, or rusted, leading to uneven heat and reduced efficiency. Turn up the heat with a clean flame by replacing old burners with a high quality stainless steel AOG Grill burner to enjoy consistent surface heat, just like when your grill was new.

Fits the following Models:

  • American Outdoor Grill (AOG), OEM Part 24-B-06

Key Features:

  • Air/fuel mixture adjustment shutter for precise control.
  • Attached flame crossover tube.
  • Durable stainless steel construction for longevity.
  • Two burner mounting legs on the underside.
  • Three heat shield mounting support leg on the top.

What’s Included:

  • (1) U-Tube Stainless Steel Burner, 14-1/2in. x 6-7/8in.

Replace and upgrade your grill's performance and safety with the American Outdoor Grill (AOG) Center Feed "U" Shaped Stainless Steel Tube Burner. Say goodbye to hotspots and hello to perfectly cooked meals every time you fire up your grill.

In Stock
Retail: $133.80
$84.95
View
Add
Item# GHU1
Stainless steel center feed "U" shaped main burner for Grand Hall and some Members Mark models. Measures 5-1/8" wide X 16" long. Features an air adjustment shutter and mounting tab. (Replaces OEM# P02008004A)
In Stock
Retail: $104.20
$61.85
View
Add
Item# BMU1
Stainless steel center feed "U" shaped burner. Measures 17-3/4" X 5-3/8". The overall tip to tip length including the mounting tab is 18-3/4". Features an adjustable air mixture shutter with insect screen on the valve end and a forked mounting tab on the back end. (Replaces Brinkmann OEM part 154-8750-0). Fits Brinkmann models 810-8750-S and 810-8755-F / Charmglow models 810-8750-S, 810-8750, 8108750S, 8108750, 810-8750-F, 810-8752-S and 810-8755-F.
In Stock
Retail: $77.55
$47.99
View
Add
Item# ALFU1

Alfresco Center Feed “U” Shaped Stainless Steel Tube Burner, a high-quality replacement for Alfresco OEM burner parts 290-0038 and 510-0025. Features an Air/fuel mixture adjustment shutter for precise control and crafted from durable stainless steel construction for longevity. This 18-1/4in. x 7-3/4in. burner fits Alfresco AGBQ models and retrofits ALX2 and ALXE models. Restore Your Grill's Heat Efficiency!

Are you experiencing uneven heat distribution on your BBQ grill? Replace your burner with a new Alfresco Center Feed "U" Shaped Stainless Steel Tube Burner. Over time, your grill's original burners can become blocked, cracked, or rusted, leading to uneven heat and reduced efficiency. Don't compromise on your grilling experience. Replace your old burners with this U-shaped stainless steel burner to enjoy consistent surface heat, just like when your grill was new.

Fits the following Models:

  • Alfresco AGBQ models
  • Retrofits to older ALX2 and ALXE models
  • Replaces Alfresco OEM parts 290-0038 and 510-0025

Included:

  • 1 U-Tube Stainless Steel Burner
  • Attached flame crossover tube
  • Burner stabilizer bracket with mounting post

Key Features:

  • Air/fuel mixture adjustment shutter for precise control
  • Durable stainless steel construction for longevity

Dimensions:

  • Burner Dimensions: 18-1/4in. x 7-3/4in. Distance between the venturi/valve end of the burner to the center of the mounting post: 14-7/8in.

Upgrade your grill's performance and safety with the Alfresco Center Feed "U" Shaped Stainless Steel Tube Burner. Say goodbye to hotspots and hello to perfectly cooked meals every time you fire up your grill.

In Stock
Retail: $119.35
$76.50
View
Add
Item# DACU1
19" long X 7-1/4" wide  Dacor stainless steel "center feed" U shaped tube burner. Quality 304 Grade stainless steel construction.  IMPORTANT: The burner length measures 19" long, not including the back end mounting bracket, which measures 1-3/4" long.  The entire burner assembly, including the attached mounting bracket, measures 20-3/4" long. Features an air/fuel mixture adjustment shutter on the venturi/valve end and an attached mounting bracket with slotted screw hole on the back end.  Fits Dacor Models: EOG36LP, OBS36LP, OBS36NG, OBS52LP, OBS52NG, OB36LP, OB36NG, OB52LP, OB52NG, EOG303, EOG52, OBS36, OBS52 and EOG36.  Replaces Dacor OEM Part 72153.  Quality Aftermarket Part.
In Stock
Retail: $173.25
$110.99
View
Add
Item# DCSU1
Heavy duty stainless steel center feed U-shaped tube burner. Measures 19-1/4" total length front to back including the center tube and is 6" wide. Fits a variety of  DCS models and also some Charmglow models. Quality Aftermarket Part.  Replaces DCS OEM Part 210617P.
In Stock
Retail: $155.40
$90.25
View
Add
Item# VIKU1-IBR
Stainless steel, center feed "U" shaped main burner with attached electrode mounting bracket. Measures 19-1/2" long X 6" wide (width dimension does not include the electrode bracket). The electrode mounting bracket is 1-1/8" wide. Features an adjustable air mixture shutter and includes one screw for mounting the electrode. Fits a variety of Viking models including but not limited to, VGBQ3002RE2, VGBQ4103RE2, VGBQ4122RE2, VGIQ4103RE2 and VGIQ4103RT2.  Electrode not included, shown for display purposes only.  Replaces Viking OEM Part 029479-000.
In Stock
Retail: $192.55
$102.99
View
Add
Item# VIKU1
Heavy duty stainless steel, center-feed U burner with mounted drip shield. Fits many Viking models.  Includes attached stainless steel burner drip shield and burner mounting brackets that enable you to change from the older cast iron burner to the stainless steel VIKU1.  Center feed pipe venturi end features an adjustable air shutter and insect screen. Length including center tube is 21-3/4" and measures 6-3/4" wide across the shield. Replaces Viking OEM Burner Part PA080050 and Drip Shield Part B2004921.  
In Stock
Retail: $222.95
$112.50
View
Add
Item# HHDSB13
Stainless steel H-Burner with venturi tube assembly. Burner measures 15-5/8" wide X 8" front to back. Venturi tubes measure 7-1/2" in length.
In Stock
Retail: $85.85
$54.99
View
Add
Item# SB-V1
Stainless steel, single ported "H" burner with 7" long straight venturi tube. Burner dimensions are 8-1/8" front to back X 16" left to right. Fits Charmglow AMK and many other brands/models. Features adjustable mounting legs at each corner, venturi air/fuel mixture adjustment shutter and includes all assembly hardware, gasket and instructions.
In Stock
Retail: $47.70
$30.89
View
Add
Item# SB-V4
Stainless steel single ported "H" burner with single "adjustable" length venturi tube, adjusts from 7-1/2" to 9-1/2" long. Burner dimensions are 8-1/8" front to back X 16" left to right. Fits Warm Morning G1000 and many other brands/models. Features an air mixture adjustment shutter, mounting bracket, adjustable mounting legs at each corner and includes all assembly hardware, gasket and instructions.
In Stock
Retail: $54.80
$38.09
View
Add
Item# SB-V5
Quality stainless steel burner and venturi set. Burner dimensions 16" X 8" wide. Fits left side Charmglow models CC-1, 8260 and 4000. Kit includes burner, venturi, gasket, and mounting hardware.
In Stock
Retail: $55.90
$44.95
View
Add
Item# SB-V6
Quality stainless steel burner and venturi set. Burner dimensions 16" X 8" wide. Fits right side Charmglow models CC-1, 8260 and 4000. Kit includes burner, venturi, gasket, and mounting hardware.
In Stock
Retail: $55.90
$44.95
View
Add
Item# SB-V12
8-1/8" X 16" quality stainless steel single ported "H" burner and adjustable venturi set. Burner dimensions are 16" X 8-1/8" and the venturi adjusts from 8" to 11" long. The "H" burner features 4 adjustable mounting legs and the venturi tube features an air/fuel mixture adjustment shutter, set screw (for setting length adjustment) and a mounting flange with 2 elongated screw holes.  Fits a variety of post mounted grills that require a "single" control valve and a 8" to 11" venturi reach.
In Stock
Retail: $53.30
$37.99
View
Add
Item# GGDLB13
Stainless steel H-Burner with venturi tube assembly. Burner measures 19-3/8" wide X 8" front to back. Fits MHP models WNK and TJK.
In Stock
Retail: $102.15
$69.99
View
Add
Item# LB-V1
Stainless steel, single ported "H" burner with 7" long straight venturi tube. Burner dimensions are 8" front to back X 19-1/2" left to right. Fits Charmglow HEJ and many other brands/models. Features adjustable mounting legs at each corner, venturi air/fuel mixture adjustment shutter and includes all assembly hardware, gasket and instructions.
In Stock
Retail: $54.00
$38.09
View
Add
Item# LB-V12
8" X 19-1/2" quality stainless steel single ported "H" burner and adjustable venturi set. Burner dimensions are  8" X 19-1/2" and the venturi tube adjusts from 8" to 11" long. The "H" burner features 4 adjustable mounting legs and the venturi tube features an air/fuel mixture adjustment shutter, set screw (for setting length adjustment) and a mounting flange with 2 elongated screw holes.  Fits a variety of grills that require a 8" to 11" straight venturi reach.
In Stock
Retail: $66.90
$42.25
View
Add
Item# DPP109
19-1/2" stainless steel Broilmaster "H" burner with dual venturi tubes. Fits "H3X and H4X", model years 2012 and newer. Dimensions 19-1/2" X 8-1/8". Venturi tube "drop" (distance from the bottom of the burner to the bottom of the tubes) is 3". Venturi tube "reach" (distance from the end of the venturi tube to the center line of vertical pipe) is 7". Features air adjustment shutters and spider screens on venturi pipe ends. Gasket, screws and installation instructions included. OEM Broilmaster Part. MInor Assembly Required.
In Stock
Retail: $99.00
$89.10
View
Add
Item# 134-BLZ-IRN

Genuine Blaze® Stainless Steel and Ceramic Infrared(IR) Sear Burner. Replaces existing Blaze infrared sear burners, or convert a Blaze conventional burner to an infrared sear burner! Features a ceramic honeycomb flame emitter with perforated stainless steel screen cover and a mounting peg with cotter pin hole.

Fits most Blaze Grill models. Superior product for your premium Blaze Grill.

You're not just cooking, you're crafting culinary masterpieces!. Sear meats fast and effectively with a Blaze Infrared Sear Burner by converting one of your regular burners into a high-heat sear zone. Or, replace an existing malfunctioning worn Blaze Infrared Burner and get your premium grill back to a tip-top searing machine.

Measures:

  • Length: 16in. (including the venturi tube at the valve end and the mounting tab extension at the back end of burner)
  • Width: 5-1/2in.

What’s Included:

  • (1) Blaze® Infrared Sear Burner
  • Installation instructions
  • Spacer/washer
  • #4 Allen wrench
  • Genuine Blaze Part
In Stock
Retail: $137.49
$106.99
View
Add
Item# 192-3051
Firemagic Infrared burner. Fits Aurora models A540 and A430 only. Infrared burner top measures 7-1/4" X 12-1/2".
  • Parts included
  • Infrared burner assembly with electrodes attached
  • Burner Cover
  • Flash tube
  • Electrode wire
  • One N/G and one L/P orifice
In Stock
Retail: $527.00
$474.30
View
Add
Item# 192-3049
Firemagic Infrared burner. Fits Aurora A790, A660, A530 models and Sear Stations. Infrared burner top measures 7-3/8" X 15-1/4".

 

  • Parts included
  • Infrared burner assembly with electrodes attached
  • Burner Cover
  • Flash tube
  • Electrode wire
  • One N/G and one L/P orifice
In Stock
Retail: $544.00
$489.60
View
Add
Item# SCTB2
15-1/2" X 4-3/4" stainless steel looped pipe burner. Fits a variety of Sams Club/Members Mark models. Burner measures 15-1/2" long (including the mounting tab extension at the back end) X 4-3/4" wide. Features an air mixture adjustment shutter at the valve end.
In Stock
Retail: $62.05
$31.75
View
Add
Item# 55710187
16" diameter "circular" stainless steel tube burner. Measures 16" from outside edge to outside edge. Features an insect screen at the valve opening. Includes 4 mounting bracket/tabs. Fits Charbroil Big Easy Tru-Infrared Turkey Fryer/Roaster and Smoker Cooker. Genuine Charbroil Part.
In Stock
$15.59
View
Add
Item# JATB1
Round looped tube burner. Stainless steel. Measures 16" tip to tip X 4-1/2" wide. Mounting end has a flat flange with holes drilled on each side.
In Stock
Retail: $58.00
$31.55
View
Add
Item# NGB1
Stainless steel looped tube burner. Measures 6-1/2" wide by 16-5/8" long. Features an adjustable air shutter and spot welded, centered mounting screw with nut.
In Stock
Retail: $56.60
$31.45
View
Add
Item# 69957
Stainless steel burner tube. Fits Weber Baby Q, Q100/120 and Q1000/1200 Series models. Overall burner length is 17" x 5-3/4" wide.  Mounting hardware included.  Genuine Weber Part.
In Stock
Retail: $41.99
$32.45
View
Add
Item# 69956
Stainless steel burner tube. Fits Weber Q200/220 and Q2000/2200. Burner length is 20-1/2" x 7-1/2" wide.  Genuine Weber Part.
In Stock
Retail: $47.99
$33.39
View
Add
Item# 65032
Burner tube set for Weber Q300/320 and Q3000/3200 models.  Set includes one "P" shaped burner tube, one "straight" burner tube, mounting hardware and installation instructions.  Overall burner assembly length is 23-3/4", including mounting tab. Center burner tube measures 21-1/4".  This burner set fits the newer Q3000/3200 (2014 to Current) and the older Q300/320 (2013 and Older) models.  IMPORTANT: The igniter electrode from the older Q300/320 models (2013 and Older) will "NOT" work properly for this redesigned burner set.  If you are installing part 65032 into an older Q300/320 model (2013 and Older), it may be necessary to install a new igniter kit, Part 60092 (Manual) or Part 63788 (Electronic).  Genuine Weber Part.
In Stock
Retail: $67.99
$61.55
View
Add
Item# 55710468
18" diameter "circular" stainless steel tube burner (430 Grade Stainless). Measures 18" from outside edge to outside edge. Features an insect screen at the valve opening. Includes mounting hardware, 4 screws. Fits Charbroil Big Easy Tru-Infrared Smoker/Roaster/Grill (SRG). Genuine Charbroil Part.
In Stock
$21.68
View
Add
Item# OBSPH34
15-1/4" long X 4" wide stainless steel dual feed oval main burner assembly., for Phoenix BBQ models.  Includes two attached mounting stud bolts with wing nuts, attached mounting bracket for igniter electrode/collector box (igniter/collector box sold separately, see part IG5B) and two venturi gas feed tubes with air/fuel mixture adjustment shutters and insect screens. The spread (distance between the venturi tubes center to center) measures 2" and the reach is 7-1/4" (measured from the end of the venturi pipe to the center of the 90 degree bend toward the bottom of the burner).  Fully assembled.  Genuine Phoenix Part.
In Stock
Retail: $49.05
$35.15
View
Add
Item# 134-BLZ-4LBM-001
15-1/4" long stainless-steel tube burner for Blaze 3 and 4 burner models (that utilize SS tube burners). Features an air/fuel mixture adjustment shutter with set screw and insect screen on the valve end and a 90-degree bend mounting flange with an offset screw hole on the back end. Sold individually. Genuine Blaze Part.
SOLD OUT: Expected In Stock 10/18/2024
$27.65
View
Item# 55710770
Stainless steel 4" diameter round burner for "PORTABLE" Patio Bistro Tru-Infrared models. Features tri-pod style mounting/support legs and a single curved venturi tube with 4-3/4" reach.  Male threaded heat tent mounting post and electrode shield attached. Mounting leg hardware, 3 screws included.
In Stock
$11.99
View
Add
Item# 29102220
Stainless steel 6" diameter round burner for Charbroil Patio Bistro Tru-Infrared grills. Features a single curved venturi tube with 8-5/8" reach and 2 welded on mounting brackets. Charbroil OEM Part.
In Stock
$13.99
View
Add
Item# 80016159
Stainless steel burner assembly. Burner measures 7-1/2" long and the center gas supply tube drops down 3". More than one required and sold by each.
In Stock
$12.99
View
Add
Item# G616-2500-W1
Stainless steel burner assembly. Burner measures 7-1/2" long and the center gas supply tube drops down 2-1/8" (measured from underside of burner tube). More than one required and sold individually.
In Stock
Retail: $12.99
$12.99
View
Add
Item# G517-0500-W1
Stainless steel Char-Broil RED burner assembly. Burner measures 8-1/8" long and the center drop down tube measures 2". More than one required and sold by each.
In Stock
$11.99
View
Add
Item# 5068030
Round burner used in sets of two or three depending on grill model. Ignitor electrode is mounted on the rear of the burner. Fits Big Easy and some Traditional models. Tube length is 7-5/8" out from the center of the burner.
In Stock
$16.38
View
Add
Item# 5995120
"Big Easy" two burner rebuild kit. For Big Easy grills that use two main burners. Includes the two main burners with electrode ignitor component mounted, connecting flash tube and the push nuts. The tubes which carry the gas to the burners have a 7-3/4" reach.  Assembly required.
SOLD OUT: Expected In Stock 10/30/2024
$32.89
View
Item# 5995122
"Big Easy" three burner rebuild kit. For Big Easy grills that use three main burners. Includes the three main burners with electrode ignitor component mounted, two connecting flash tubes and the push nuts. The tubes which carry the gas to the burners have a 7-3/4" reach.  Assembly required.
SOLD OUT: Expected In Stock 10/30/2024
$47.19
View
Item# G511-2900-W1
Stainless steel burner assembly. Burner measures 9" long and the center gas supply tube drops down 2-1/8". More than one required and sold by each.
In Stock
$11.99
View
Add
Item# 10401
Weber Performer stainless steel burner tube and igniter assembly for model years "2004 and older". This burner is designed to ignite the charcoal. Measures 11-1/4" long, comes with mounting bracket, electrode with 13" long wires and push button piezo style spark generator already attached. Mounting hardware and installation instructions included. Genuine Weber Part.
In Stock
Retail: $44.74
$36.10
View
Add
Item# 10469
Weber Performer stainless steel burner tube and igniter assembly for model years "2005-2012". This burner is designed to ignite the charcoal. Measures 11-1/4" long, comes with mounting bracket, electrode with 24" long wires and push button piezo style spark generator already attached. Installation instructions included. Genuine Weber Part.
In Stock
Retail: $44.74
$26.49
View
Add
Item# 85683
Weber Performer stainless steel burner assembly for model years "2013 to current". This burner is designed to ignite charcoal. Measures 11-1/4" long, comes with mounting bracket and electrode with wires already attached.  Mounting hardware and installation instructions included. Genuine Weber Part.
In Stock
$34.43
View
Add
Item# G651-1100-W1
14-1/8" long stainless steel "Sear Burner-Bar Burner". Measures 14/18" long X 2-5/8" wide. Features an attached electrode mounting bracket and drip shield, insect screen at the venturi end and a mounting peg on the underside of the burner. The distance from the end of the venturi pipe to the center of the mounting peg is 12". Fits many 6 burner Charbroil models, years 2011-2017. Genuine Charbroil Part.
In Stock
$13.99
View
Add
Item# BMTB2
Stainless steel 14-1/4" straight tube burner. Mounting tab is flat and has the mounting hole offset on the tab. Measures 14-1/4" end to end including tab. Replaces Brinkmann OEM Part 154-4415-4.
In Stock
Retail: $42.30
$23.10
View
Add
Item# 18629
Broil King 14-3/8" long stainless steel "Tube-In-Tube" burner with insect screen and air/fuel mixture adjustment shutter. These unique large diameter "dual tube" stainless steel burners feature side porting which provides two rows of flame per burner for enhanced heat distribution. Fits Broil King "Signet" and "Sovereign" models (2006 and Newer) with front to back straight tube burners.  Also fits a variety of Broil-Mate and GrillPro models, please confirm dimensions. Mounting hardware and installation instructions included. More than one required, sold individually. Genuine Broil King Part.
In Stock
$16.50
View
Add
Item# 80009947
Stainless steel tube burner. This burner features an air adjustment screw and the mounting flange end has a short 90 degree bend with a centered mounting hole. Measures 14-3/8" long.
In Stock
$11.49
View
Add
Item# G431-0300-W2
Stainless steel tube burner. Measures 14-3/8" long x 1" in diameter. Fits a variety of Charbroil, Kenmore and many other brands/models, which utilize a "screw mount" carry over tube. The venturi or valve end of the tube has an insect screen, air mixture screw and mounting holes for the electrode. The back end of the tube features a short 90 degree bend with a centered mounting screw hole and a hole for the carry over tube mounting screw. Mounting hardware included. Genuine Charbroil Part.
In Stock
$15.39
View
Add
Item# G432-D700-W1
14-3/8" X 1" diameter long stainless steel tube burner. Features indentations for clamp-on style igniter. The mounting flange end has a short 90 degree bend with a centered "slotted" mounting hole. Crossover stud located at mid-tube. Crossover tube mounting hardware included (2 cotter pins and 1 stud screw).
In Stock
$10.99
View
Add
Item# G431-0300-W2A
Stainless steel tube burner. Measures 14-3/8" long x 1" in diameter. Fits a variety of Charbroil, Kenmore and many other brands/models, which utilize a "screw mount" carry over tube. The venturi or valve end of the tube has an insect screen, air mixture screw and mounting holes for the electrode. The back end of the tube features a short 90 degree bend with a centered mounting screw hole and a hole for the carry over tube mounting screw. Mounting hardware included. Genuine Charbroil Part. (Replaces Part G431-0300-W2)
In Stock
$15.39
View
Add
Item# G432-Y700-W1
14-3/8" long X 1" diameter stainless steel tube burner. Features indentations for clamp-on style igniter and a carryover mounting stud screw. One cotter pin for mounting the carryover tube is included. The mounting flange end has a short 90 degree bend with a centered "slotted" mounting hole. Fits a variety of Charbroil Performance, Classic and Kenmore models. Genuine Charbroil Part.
In Stock
$11.33
View
Add
Item# BMTB1
Stainless steel 14-1/2" straight tube burner. Mounting tab is bent at a 45 degree angle and has the mounting hole centered on the tab. Measures 14-1/2" end to end including tab. Replaces Brinkmann OEM Part 154-9210-0.
In Stock
Retail: $42.30
$23.10
View
Add
Item# A432-0100-W1
14-1/2" long X  5/8" diameter  black porcelain coated steel main burner tube. Fits Charbroil Advantage Series "model years 2015 and newer".  5/8" OD tube features vented venturi end, 90 degree bend with center slotted mounting hole at the back end, cross over tube mounting stud screw and air mixture adjustment screw. Sold individually, more than one required. Charbroil OEM Part. (Replaces Part G432-8M00-W1)
In Stock
$9.99
View
Add
Item# G466-2500-W1
Charbroil newer generation, narrow 5/8" DIAMETER stainless steel main burner tube. Fits Charbroil, Professional, Signature, Commercial and Performance Series Tru-Infrared models (2015 and Newer).  Measures 14-3/4" long. Features a 90 degree bend and slotted mounting hole at the back end, carry over tube mounting stud screw and air mixture adjustment screw. Hardware, 2 cotter pins, included. Sold individually, more than one required.  Charbroil OEM Part.
In Stock
$10.29
View
Add
Item# SCTB5
14-3/4" stainless steel tube burner. Fits a variety of Sams Club models. Features unique flame hole "lip guard" on each side of the tube (helps to prevent food drippings from clogging the flame holes), an air adjustment shutter with set screw on the valve end, mounting flange with centered hole on the back end and an attached igniter electrode mounting bracket.
In Stock
Retail: $41.70
$22.49
View
Add
Item# 16781
14-3/4" long stainless steel straight tube burner. Features mounting holes for electrode and spider screen at the venturi end and a centered mounting hole at the back end of the burner. Fits a variety of Master Forge models as well as many other brand/models. One electrode mounting screw included.
In Stock
Retail: $40.74
$21.74
View
Add
Item# SCTB3
Straight stainless steel tube burner. Burner has an adjustable air shutter. Measures 14-7/8" long. Mounting hole is centered on back end.
In Stock
Retail: $43.55
$22.55
View
Add
Item# BBQT2

BBQ Grillware Stainless Steel Tube Burner, measures 16-1/2in. from end-to-end including mounting flange. Burner mounting flange has a single centered hole.

Turn up the heat with a clean flame by replacing old burners with these new high quality BBQ Grillware stainless steel tube burners to enjoy consistent surface heat, just like when your grill was new.

Fitment:

  • BBQ Grillware models GSF-2616J, GSF-2616, GFC-2616 and 41590.
  • Various other gas bbq grill brands/models that require a 16-1/2in. tube burner.

Key Features:

  • Air/fuel mixture adjustment shutter for precise control
  • Durable stainless steel construction for longevity

Included:

  • (1) Stainless Steel Tube Burner - 15-1/4in.
In Stock
Retail: $42.30
$22.10
View
Add
Item# BMTB3
Stainless steel 15-3/8" straight tube burner. Mounting tab is flat and has the mounting hole offset on the tab. Measures 15-3/8" end to end including tab.
In Stock
Retail: $42.30
$23.10
View
Add
Item# BMTB4
15-3/8" long stainless steel burner tube. Fits many Brinkmann and Nexgrill models. Features an air mixture adjustment shutter with insect screen on the valve end, an offset mounting hole on the back end and an attached electrode mounting bracket.
In Stock
Retail: $38.25
$21.39
View
Add
Item# SCTB1
Straight stainless steel tube burner. Burner features include an adjustable air shutter and a mounting flange welded to the side of the burner for the ignitor electrode. Measures 15-1/2" long. Mounting hole is centered on back end.
In Stock
Retail: $43.55
$22.55
View
Add
Item# 18631
Broil King 15-3/4" long stainless steel "Tube-In-Tube" burner with insect screen and air/fuel mixture adjustment shutter. These unique large diameter "dual tube" stainless steel burners feature side porting which provides two rows of flame per burner for enhanced heat distribution. Fits Broil King "Baron" models (2013 and Newer) with front to back straight tube burners.  Mounting hardware and installation instructions included. More than one required, sold individually. Genuine Broil King Part.
In Stock
$19.05
View
Add
Item# 80013421
15-7/8" long stainless steel tube burner. Narrow end which connects to the valve includes wire mesh spider guards. IMPORTANT: This burner uses a "screw" mounted style carry over tube.
In Stock
$11.99
View
Add
Item# 80016303
Stainless steel tube burner. Features insect screens at the valve end. Mounting end has slight 90 degree bend with centered mounting hole. Measures 15-7/8" long.
In Stock
$14.15
View
Add
Item# CTB3
Stainless steel straight tube burner. Mounting tab is flat and has the mounting hole offset to the right side of the tab. Measures 15-7/8" end to end.
In Stock
Retail: $42.30
$24.39
View
Add
Item# G356-2200-W1
15-7/8" long X 1" diameter stainless steel tube burner. Features venturi end vent guard and indentations for clamp-on style igniter. The mounting flange end has a short 90 degree bend with a centered "round" mounting hole. Crossover stud screw located at mid-tube. Crossover tube mounting hardware included (2 cotter pins and 1 stud screw).
In Stock
$10.99
View
Add
Item# G508-A300-W1
Stainless steel burner for Charbroil TEC Series replaces old brass burner. Burner measures 15-7/8" long and includes a spider guard screen at the valve end. Also features an air adjustment screw at the burner center near the valve end. (Replaces part number 80008991)
SOLD OUT: Expected In Stock 10/30/2024
$12.49
View
Item# G515-2200-W1
15-7/8" long X 1" diameter stainless steel tube burner. Features indentations for clamp-on style igniter. The mounting flange end has a short 90 degree bend with a centered "slotted" mounting hole. Crossover stud screw located at back end of tube. Crossover tube mounting hardware included(2 cotter pins and 1 stud screw).
In Stock
$11.99
View
Add
Item# G517-7300-W1
15-7/8" long X 1" diameter stainless steel tube burner. Features indentations for clamp-on style igniter. The mounting flange end has a short 90 degree bend with a centered "slotted" mounting hole. Crossover stud located at mid-tube. Crossover tube mounting hardware included (2 cotter pins and 1 stud screw).
In Stock
$10.99
View
Add
Item# G527-2200-W1
15-7/8" long X 1" DIAMETER stainless steel main burner tube. Features indentations for clamp-on style igniter. The mounting flange end has a short 90 degree bend with a centered "round" mounting hole. Crossover stud screw located at mid-tube. Crossover tube mounting hardware included(1 cotter pin and 1 stud screw).
In Stock
$14.39
View
Add
Item# CTB2
Stainless steel straight tube burner. Mounting tab is flat and has the mounting hole offset to the right side of the tab. Measures 16-1/4" end to end.
In Stock
Retail: $42.30
$24.39
View
Add
Item# 15611
Stainless steel main burner tube. Measures 16-3/8" long X 1" in diameter. Features an attached electrode mounting bracket with electrode mounting screws, an air mixture adjustment shutter with insect screen at the venturi end and a centered slotted mounting hole at the back end. Fits a variety of Master Forge models.
In Stock
Retail: $41.90
$21.75
View
Add
Item# MFT1
16-7/16" stainless steel tube burner with an attached igniter electrode mounting bracket (electrode not included). Features an air adjustment shutter and round centered hole on the mounting flange.
In Stock
Retail: $46.60
$25.99
View
Add
Item# BBQT1

Stainless Steel Tube Burner, measures 16-1/2in. from end-to-end including mounting flange. Burner mounting flange has a single centered hole.

Turn up the heat with a clean flame by replacing old burners with these new high quality BBQ Grillware stainless steel tube burners to enjoy consistent surface heat, just like when your grill was new.

Fitment:

  • BBQ Grillware models GGPL-2100, GSC-2418, GSC-2418N
  • Various other gas bbq grill brands/models that require a 16-1/2in. tube burner.

Key Features:

  • Air/fuel mixture adjustment shutter for precise control
  • Durable stainless steel construction for longevity

Included:

  • (1) Stainless Steel Tube Burner - 16-1/2in.
In Stock
Retail: $42.30
$22.20
View
Add
Item# KENMFT1
16-3/4" stainless steel tube burner. Features an air adjustment shutter. The mounting flange bends at 90 degrees and has a centered slotted hole. Fits many Kenmore and Master Forge models.
In Stock
Retail: $42.20
$24.39
View
Add
Item# CTB1
Stainless steel straight tube burner. Mounting tab has a 90 degree bend and is manufactured with dual slotted holes for mounting. Measures 16-7/8" end to end.
In Stock
Retail: $42.30
$24.39
View
Add
Item# 80016864
Stainless steel tube burner.  Measures 16-7/8" long x 1" in diameter.  Fits a variety of Charbroil Conventional and Tru-Infrared models, which utilize a "screw mount" carry over tube.  The venturi or valve end of the tube has an insect screen, air mixture screw and mounting holes for the electrode.  The back end of the tube features a short 90 degree bend with a centered mounting screw hole and a hole for the carry over tube mounting screw. Burner mounting hardware included (one each, screw, flat washer and lock washer).  Genuine Charbroil Part. 
In Stock
$11.99
View
Add
Item# DUCHD1
17" long stainless steel (304 Grade) burner tube. Fits Ducane Stainless and Meridian Series models. Features an air/fuel mixture adjustment shutter. More than one required, sold individually. Also available in sets of 3 and 5. See parts DUCHD1-3 (Replaces OEM Burner Set Part 30500603) and DUCHD1-5 (Replaces OEM Burner Set Part 30500702).
In Stock
Retail: $42.30
$19.99
View
Add
Item# DUCHD1-3
Set of three 17" long stainless steel (304 Grade) main burner tubes. Fits Ducane Stainless and Meridian Series 3 burner models. 17" length measurement includes the forked end which inserts into the slots at the rear of the grill. Each burner features an air/fuel mixture adjustment shutter at the venturi end.  Replaces Ducane OEM Burner Set, Part 30500603.  For installation instructions see the PDF "thumbnail" image, under the main photo frame for this part.
In Stock
Retail: $126.90
$47.99
View
Add
Item# DUCHD1-5
Set of five 17" long stainless steel (304 Grade) main burner tubes. Fits Ducane Stainless and Meridian Series 5 burner models. 17" length measurement includes the forked end which inserts into the slots at the rear of the grill. Each burner features an air/fuel mixture adjustment shutter at the venturi end.  Replaces Ducane OEM Burner Set, Part 30500702.  For installation instructions see the PDF "thumbnail" image, under the main photo frame for this part.
In Stock
Retail: $211.50
$78.99
View
Add
Item# SCTB4
17" stainless steel tube burner. Fits a variety of Sams Club models. Features unique flame hole "lip guard" on each side of the tube (helps to prevent food drippings from clogging the flame holes), an air adjustment shutter with set screw on the valve end and a mounting flange with off-center hole on the back end.
In Stock
Retail: $41.70
$22.49
View
Add
Item# 13101
Stainless steel tube burner with 30 degree angled end. Total burner length "measured in a straight line" from tip to tip is 17-1/8". Features a venturi end spider screen, adjustable air shutter and a welded on heat shield flange.
In Stock
Retail: $41.38
$23.04
View
Add
Item# 18633
Broil King 17-1/4" long stainless steel "Tube-In-Tube" burner with insect screen and air/fuel mixture adjustment shutter. These unique large diameter "dual tube" stainless steel burners feature side porting which provides two rows of flame per burner for enhanced heat distribution. Fits Broil King "Regal" (2013-Newer) and "Imperial" (2009-Newer) models with front to back straight tube burners.  Mounting hardware and installation instructions included.  More than one required, sold individually. Genuine Broil King Part.
In Stock
$22.39
View
Add
Item# WTBGOA
17-1/4" stainless steel tube burner for Weber "Go Anywhere" portable grill. Features a 90 degree bend with square mounting hole at the back end. Includes burner to orifice retaining clip. Replaces OEM Parts 74238 and 67193. Quality Aftermarket Part.
In Stock
Retail: $19.65
$12.26
View
Add
Item# VTB1
Stainless steel "straight" tube burner measures 17-1/4" tip to tip. The mounting end bends 90 degrees. Features an air adjustment shutter and a welded on heat shield flange.
In Stock
Retail: $44.95
$26.59
View
Add
Item# G422-3300-W1
17-3/4" long X 5/8" diameter stainless steel main burner tube. Fits Charbroil Signature "Conventional" (Not Tru-Infrared) Series, 2, 3 and 4 burner models. "Model years 2015 and newer". 5/8" OD tube features vented venturi end, 90 degree bend with centered slotted mounting hole at the back end, carryover tube mounting stud screw with cotter pin clip and air mixture adjustment screw. Sold individually, more than one required. Charbroil OEM Part.
In Stock
Retail: $8.99
$10.49
View
Add
Item# G470-5200-W1
17-3/4" long X 5/8" diameter stainless steel main burner tube. Fits Charbroil Performance and Advantage Series, 4, 5 and 6 burner models "years 2017 and newer".  5/8" OD tube features vented venturi end, 90 degree bend with center slotted mounting hole at the back end, carryover tube mounting stud screw, air mixture adjustment screw and one carryover mounting cotter pin.  Sold individually, more than one required. Charbroil OEM Part.
In Stock
$10.49
View
Add
Item# UFT6
Stainless steel tube burner. Measures 17-3/4" total length.
In Stock
Retail: $36.50
$19.29
View
Add
Item# 68949

Two Genuine Weber Stainless Steel Tube Burners and one Crossover Flame Tube set for Weber Spirit 200 Series model years 2013-Current with front mounted controls. Two 18in. left and right main Burners (The left side main burner tube features an attached igniter electrode mounting bracket), and one 10-1/2in. Gas/Flame Crossover Burner Tube with two attached drip shields. Weber stainless steel burners feature venturi's with built-in wire-mesh screen spider guards. Genuine Weber Part, replaces Weber Part 69785.

Are you experiencing uneven heat in your Weber BBQ grill? Replace your burners with our Weber® Stainless Steel Tube Burner Set. Over time, your grill's original burners gas ports become blocked, cracked, or rusted, leading to uneven heat and reduced efficiency. Turn up the heat with a clean consistent flame by replacing old burners with a long lasting set of high quality stainless steel Weber® burners from Grillparts.com. Get even surface heat to your cooking grates, just like when your grill was new!

Fits Weber Spirit 200 series, model years 2013-present

Set Includes:

  • (2) 18in. Stainless Steel Tube Weber Burners
  • (1) 10-1/2in. Gas/Flame Crossover Burner Tube
  • Installation instructions included.
  • Genuine Weber Part.
In Stock
Retail: $49.99
$46.60
View
Add
Item# WTBSPT2SET

Two Stainless Steel Tube Burners and one Crossover Flame Tube set for Weber Spirit 200 Series model years 2013-Current with front mounted controls. Two 18in. left and right main Burners (The left side main burner tube features an attached igniter electrode mounting bracket), and one 10-1/2in. Gas/Flame Crossover Burner Tube with two attached drip shields. Weber stainless steel burners feature venturi's with built-in wire-mesh screen spider guards. These high quality aftermarket parts replace Weber OEM Parts 69785 and 68949.

Are you experiencing uneven heat in your Weber BBQ grill? Replace your burners with our high quality Stainless Steel Tube Burner Set for Weber® grills. Over time, your grill's original burners gas ports become blocked, cracked, or rusted, leading to uneven heat and reduced efficiency. Turn up the heat with a clean consistent flame by replacing old burners with a long lasting set of high quality stainless steel burners for your Weber® grill from Grillparts.com. Get even surface heat to your cooking grates, just like when your grill was new!

Fits these following Weber® gas grill models:

  • Weber Spirit 200 series, model years 2013-present
  • Replace Weber OEM Parts 69785 and 68949.

Set Includes:

  • (2) 18in. Stainless Steel Tube Weber Burners
  • (1) 10-1/2in. Gas/Flame Crossover Burner Tube
  • Installation instructions included.
  • Highest quality aftermarket replacement parts
In Stock
Retail: $66.90
$39.95
View
Add
Item# WTBSPT3SET

Four piece Tube Burner and Flame Crossover Set for Natural Gas (NG) or Propane Weber Spirit 310 and 320 Series grills manufactured in 2013 to present. This high quality alternative replaces Weber OEM parts 69787, 68950 and 68951.

Stainless steel Weber Spirit 310 and 320 Series Gas burner tube set. Fits model years 2013 to current years that have heat controls in the front of the grill. Set includes the three main burners and one  crossover burner. All main burner tubes feature a forked mounting tab back end and an air/fuel mixture adjustment shutter with insect screen on the valve end. The left side main tube has an attached electrode mounting bracket. The crossover burner tube features an attached middle burner support bracket and 4 drip shields.

Are you experiencing uneven heat in your Weber BBQ grill? Replace your burners with our Stainless Steel Tube Burner Set for Weber® grills. Over time, your grill's original burners gas ports become blocked, cracked, or rusted, leading to uneven heat and reduced efficiency. Turn up the heat with a clean consistent flame by replacing old burners with a long lasting set of high quality stainless steel burners from Grillparts.com. Get even surface heat to your cooking grates, just like when your grill was new!

Measurements:

  • Left and right main burners: 18-1/16in.
  • Center main burner: 17-3/4in.
  • Main crossover burner tube: 15-1/4in.

What’s Included:

  • (1) Four piece Tube Burner and Flame Crossover Set for Weber Spirit 310 and 320 Series grills
  • For Natural Gas (NG) Grill Models
  • Model Years 2013 and Newer
  • Fits Spirit 310, 315, 320, 325 series gas grills
  • Installation instructions included
  • Highest quality replacement part
In Stock
Retail: $87.05
$49.95
View
Add
Item# 68948

Six piece Genuine Weber Tube Burner and Flame Crossover Set for Weber Spirit 330 & 335 Series grills manufactured in 2013 to present. Stainless steel Weber Spirit 330 and 335 Series Propane (LP) or Natural Gas (NG) burner tube set. Fits model years 2013-Current that have heat controls in the front of the grill. Set includes the three main burners, one sear burner and two crossover burners.

Are you experiencing uneven heat in your Weber BBQ grill? Replace your burners with our Weber® Stainless Steel Tube Burner Set. Over time, your grill's original burners gas ports become blocked, cracked, or rusted, leading to uneven heat and reduced efficiency. Turn up the heat with a clean consistent flame by replacing old burners with a long lasting set of high quality stainless steel Weber® burners from Grillparts.com. Get even surface heat to your cooking grates, just like when your grill was new!

Tube Burner and Flame Crossover Measurements:

  • Left and right main burners: 18in.
  • Center main burner: 17-3/4in.
  • Sear burner: 17-3/4in.
  • Main crossover burner tube: 15-1/4in.
  • Sear burner crossover tube: 3-7/8in.

What’s Included:

  • (1) Six piece Genuine Weber Tube Burner and Flame Crossover Set for Weber Spirit 330 & 335 Series grills
  • Model Years 2013 and Newer
  • Installation instructions included.
  • Replaces Part 69299.
  • Genuine Weber Part.
In Stock
$88.40
View
Add
Item# DUCT1
Individual (single piece),18" long stainless steel burner tube for Ducane Affinity models. Features an air/fuel mixture adjustment shutter on the venturi/valve end and forked mounting tabs on the back end.
In Stock
Retail: $38.30
$9.00
View
Add
Item# DUCT1-3
Set of three, 18" long Ducane Affinity stainless steel tube burners, for 3100/3200/3400 models. Each burner features an air mixture adjustment shutter on the venturi/valve end and forked mounting tabs on the back end.
In Stock
$28.75
View
Add
Item# DUCT1-4
Set of four, 18" long Ducane Affinity Series stainless steel tube burners, for 4100/4200/4400 models. Each burner features an air mixture adjustment shutter venturi/valve end and forked mounting tabs on the back end.
In Stock
$36.85
View
Add
Item# 12181
Stainless steel tube burner measures 18" tip to tip. Features an ignitor electrode mounting bracket attached (Electrode not included), and adjustable air shutter with spider screen. Burner mounting flange bends up at a 90 degree angle as shown.  Quality Aftermarket Part. Replaces DCS OEM Part Number 213467.
In Stock
Retail: $46.55
$22.37
View
Add
Item# 67024

Two Genuine Weber Stainless Steel Tube Burners and one Crossover Flame Tube set for Propane fueled Weber Spirit II 210 Series grills, model years 2017 and newer. Two 18in. left and right main Burners (The left side main burner tube features an attached igniter electrode mounting bracket), and one 10-1/2in. Gas/Flame Crossover Burner Tube with two attached drip shields. Weber stainless steel burners feature venturi's with built-in wire-mesh screen spider guards. Mounting hardware (2 screws) and installation instructions included.

Are you experiencing uneven heat in your Weber BBQ grill? Replace your burners with our Weber® Stainless Steel Tube Burner Set. Over time, your grill's original burners gas ports become blocked, cracked, or rusted, leading to uneven heat and reduced efficiency. Turn up the heat with a clean consistent flame by replacing old burners with a long lasting set of high quality stainless steel Weber® burners from Grillparts.com. Get even surface heat to your cooking grates, just like when your grill was new!

Fits Weber Spirit II 210 Series, model years 2017 and newer.

Propane Burner Set Includes:

  • (2) 18in. Stainless Steel Tube Weber Burners
  • (1) 10-1/2in. Gas/Flame Crossover Burner Tube
  • (2) Mounting screws.
  • Installation instructions included.
  • Genuine Weber Part.
In Stock
$44.15
View
Add
Item# 67025

Four piece Genuine Weber Tube Burner and Flame Crossover Set for Propane (LP) fueled Weber Spirit II 310 Series manufactured in 2017 and newer that utilize Propane gas. The main burners measure 18in. long and the crossover is 15-1/4in. long, and has built in drip shields. The three main burners feature an insect screen with a air/fuel mixture adjustment shutter on the venturi end and a forked mounting tab on the back end. The left side burner has an attached electrode mounting bracket. Mounting hardware (3 screws) and installation instructions included. Genuine Weber Part. 

Are you experiencing uneven heat in your Weber BBQ grill? Replace your burners with our Weber® Stainless Steel Tube Burner Set. Over time, your grill's original burners gas ports become blocked, cracked, or rusted, leading to uneven heat and reduced efficiency. Turn up the heat with a clean consistent flame by replacing old burners with a long lasting set of high quality stainless steel Weber® burners from Grillparts.com. Get even surface heat to your cooking grates, just like when your grill was new!

Measurements:

  • Main burners: 18in.
  • Flame crossover burner tube: 15-1/4in.

What’s Included:

  • (1) Four piece Genuine Weber Tube Burner and Flame Crossover Set for Weber Spirit II 310 Series grills
  • Mounting hardware included (3 screws)
  • For Propane (LP) Gas Grill Models
  • Model Years 2017 and Newer
  • Installation instructions included.
  • Genuine Weber Part.
In Stock
Retail: $59.08
$57.70
View
Add
Item# 67102

Two Genuine Weber Stainless Steel Tube Burners and one Crossover Flame Tube set for Natural Gas fueled Weber Spirit II 210 Series grills, model years 2017 and newer. Two 18in. left and right main Burners (The left side main burner tube features an attached igniter electrode mounting bracket), and one 10-1/2in. Gas/Flame Crossover Burner Tube with two attached drip shields. Weber stainless steel burners feature venturi's with built-in wire-mesh screen spider guards. Mounting hardware (2 screws) and installation instructions included.

Are you experiencing uneven heat in your Weber BBQ grill? Replace your burners with our Weber® Stainless Steel Tube Burner Set. Over time, your grill's original burners gas ports become blocked, cracked, or rusted, leading to uneven heat and reduced efficiency. Turn up the heat with a clean consistent flame by replacing old burners with a long lasting set of high quality stainless steel Weber® burners from Grillparts.com. Get even surface heat to your cooking grates, just like when your grill was new!

Fits Weber Spirit II 210 Series, model years 2017 and newer.

Natural Gas Burner Set Includes:

  • (2) 18in. Stainless Steel Tube Weber Burners
  • (1) 10-1/2in. Gas/Flame Crossover Burner Tube
  • (2) Mounting screws.
  • Installation instructions included.
  • Genuine Weber Part.
In Stock
Retail: $69.97
$67.85
View
Add
Item# 67103

Four piece Genuine Weber Tube Burner and Flame Crossover Set for Natural Gas fueled Weber Spirit II 310 Series manufactured in 2017 and newer. The main burners measure 18in. long and the crossover is 15-1/4in. long, and has built in drip shields. The three main burners feature an insect screen with a air/fuel mixture adjustment shutter on the venturi end and a forked mounting tab on the back end. The left side burner has an attached electrode mounting bracket. Mounting hardware (3 screws) and installation instructions included. Genuine Weber Part. 

Are you experiencing uneven heat in your Weber BBQ grill? Replace your burners with our Weber® Stainless Steel Tube Burner Set. Over time, your grill's original burners gas ports become blocked, cracked, or rusted, leading to uneven heat and reduced efficiency. Turn up the heat with a clean consistent flame by replacing old burners with a long lasting set of high quality stainless steel Weber® burners from Grillparts.com. Get even surface heat to your cooking grates, just like when your grill was new!

Measurements:

  • Main burners: 18in.
  • Flame crossover burner tube: 15-1/4in.

What’s Included:

  • (1) Four piece Genuine Weber Tube Burner and Flame Crossover Set for Weber Spirit II 310 Series grills
  • Mounting hardware included (3 screws)
  • For Natural Gas Grill Models
  • Model Years 2017 and Newer
  • Installation instructions included.
  • Genuine Weber Part.
SOLD OUT: Expected In Stock 11/8/2025
$85.65
View
Item# 68950

Four piece Genuine Weber Tube Burner and Flame Crossover Set for Propane (LP) fueled Weber Spirit 310 and 320 Series grills manufactured in 2013 to present.

Stainless steel Weber Spirit 310 and 320 Series Gas burner tube set for models that utilize Propane gas. Fits model years 2013-Current that have heat controls in the front of the grill. Set includes the three main burners and one  crossover burner.

Are you experiencing uneven heat in your Weber BBQ grill? Replace your burners with our Weber® Stainless Steel Tube Burner Set. Over time, your grill's original burners gas ports become blocked, cracked, or rusted, leading to uneven heat and reduced efficiency. Turn up the heat with a clean consistent flame by replacing old burners with a long lasting set of high quality stainless steel Weber® burners from Grillparts.com. Get even surface heat to your cooking grates, just like when your grill was new!

Measurements:

  • Left and right main burners: 18-1/16in.
  • Center main burner: 17-3/4in.
  • Main crossover burner tube: 15-1/4in.

What’s Included:

  • (1) Four piece Genuine Weber Tube Burner and Flame Crossover Set for Weber Spirit 310 and 320 Series grills
  • For Propane (LP) Gas Grill Models
  • Model Years 2013 and Newer
  • Installation instructions included.
  • Genuine Weber Part.
SOLD OUT: Expected In Stock 11/8/2024
Retail: $65.99
$63.25
View
Item# 68951

Four piece Genuine Weber Tube Burner and Flame Crossover Set for Natural Gas (NG) fueled Weber Spirit 310 and 320 Series grills manufactured in 2013 to present.

Stainless steel Weber Spirit 310 and 320 Series Gas burner tube set. Fits model years 2013-Current that have heat controls in the front of the grill. Set includes the three main burners and one  crossover burner.

Are you experiencing uneven heat in your Weber BBQ grill? Replace your burners with our Weber® Stainless Steel Tube Burner Set. Over time, your grill's original burners gas ports become blocked, cracked, or rusted, leading to uneven heat and reduced efficiency. Turn up the heat with a clean consistent flame by replacing old burners with a long lasting set of high quality stainless steel Weber® burners from Grillparts.com. Get even surface heat to your cooking grates, just like when your grill was new!

Measurements:

  • Left and right main burners: 18in.
  • Center main burner: 17-3/4in.
  • Main crossover burner tube: 15-1/4in.

What’s Included:

  • (1) Four piece Genuine Weber Tube Burner and Flame Crossover Set for Weber Spirit 310 and 320 Series grills
  • For Natural Gas (NG) Grill Models
  • Model Years 2013 and Newer
  • Installation instructions included.
  • Genuine Weber Part.
SOLD OUT: Expected In Stock 11/8/2024
Retail: $65.99
$63.35
View
Item# 55710743
Stainless steel burner tube with attached electrode and wire. Fits Charbroil Grill2Go Tru-Infrared (model years 2012 and newer). Burner measures 18-3/4" long X 2" wide. Features vented venturi end, 90 degree bend with centered mounting hole at back end and attached electrode with collector box and 9" wire.  One mounting screw included Charbroil OEM Part.
In Stock
$21.99
View
Add
Item# 62752
Set of 3 stainless steel Propane (LP) "main" burner tubes. Each tube measures 19-1/2" long. Fits Genesis 300 series, model years  2011-2016 (with "Up Front" controls). Each tube features an igniter mounting bracket and air adjustment shutter with spider screen. Burner tube mounting screws included. Genuine Weber Part.
In Stock
Retail: $59.99
$52.80
View
Add
Item# WTBG-2011SET
"Set of 3" stainless steel "main" burner tubes. Each tube measures 19-1/2" long. Fits Genesis 300 series, model years  2011-2016 (with "Up Front" controls). Each tube features an igniter mounting bracket and air adjustment shutter with spider screen.  Replaces OEM Parts 62752 and 62799.  NOTE: Mounting screws not included, see item #62774. This burner set works with either fuel type,  Natural Gas (NG) or Propane (LP).  Quality Aftermarket Part.
In Stock
$49.95
View
Add
Item# WTBG-SEAR
Stainless steel "sear burner" for Weber Genesis 330 (2011-2016). Measures 19-1/2" long and features an attached igniter mounting bracket and air adjustment shutter with spider screen. Replaces OEM parts 62753 and 62798. This burner works with either fuel type,  Natural Gas (NG) or Propane (LP).  Quality Aftermarket Part.
In Stock
$19.49
View
Add
Item# 62753
Stainless steel Propane (LP) "Sear" burner tube for Weber Genesis 330 (model years 2011-2016). Measures 19-1/2" long. Features an air adjustment shutter, spider screen and igniter/electrode mounting bracket. Genuine Weber Part.
In Stock
$23.35
View
Add
Item# 62798
Stainless steel Natural Gas (NG) "Sear" burner tube for Weber Genesis 330 (model years 2011-2016). Measures 19-1/2" long. Features an air adjustment shutter, spider screen and igniter/electrode mounting bracket. Genuine Weber Part.
In Stock
Retail: $44.91
$29.55
View
Add
Item# 62799
Set of 3 stainless steel Natural Gas (NG) "Main" burner tubes. Each tube measures 19-1/2" long.   Fits Genesis 300 series, model years 2011-2016 (with "Up Front" controls). Each tube features an igniter mounting bracket and air adjustment shutter with spider screen. Burner tube mounting screws included. Genuine Weber Part.
In Stock
Retail: $56.99
$50.89
View
Add
Item# 66069
"Set of 2" stainless steel rectangular tube Propane (LP) "Main" Burners.  Fits 2, 4 and 6 Burner Genesis II Propane (LP) Models (210, 410 and 610), "Model Years 2017 and Newer".  Four Burner Models require 2 Sets and Six Burner Models require 3 Sets.  Each tube measures 19-1/2" long (including the rear mounting tab).  Features unique rectangular tube shape, slotted mounting tab on the back end, adjustable air shutter with insect screen on the valve end and an attached igniter electrode mounting bracket. Installation instructions included. Genuine Weber Part. THIS PART IS NO LONGER AVAILABLE, SEE PART 67488.
In Stock
$53.25
View
Add
Item# 66073
"Set of 2" stainless steel rectangular tube Natural Gas (NG) "Main" Burners.  Fits 2 and 4 Burner Genesis II and II/LX Natural Gas (NG) Models (210/240 and 410/440), "Model Years 2017 and Newer". Four Burner Models require 2 Sets.  Each tube measures 19-1/2" long (including the rear mounting tab).  Features unique rectangular tube shape, slotted mounting tab on the back end, adjustable air shutter with insect screen on the valve end and an attached igniter electrode mounting bracket. Installation instructions included. Genuine Weber Part.
In Stock
Retail: $45.55
$40.50
View
Add
Item# 66074
"Set of 3" stainless steel rectangular tube Natural Gas (NG) "Main" Burners. Fits 3 and 6 Burner Genesis II and II/LX Natural Gas (NG) Models, (310/340 and 610/640), "Model Years 2017 and Newer". Six Burner Models require 2 Sets. Each tube measures 19-1/2" long (including the rear mounting tab). Features unique rectangular tube shape, slotted mounting tab on the back end, adjustable air shutter with insect screen on the valve end and an attached igniter electrode mounting bracket. Installation instructions included. Genuine Weber Part.
In Stock
$51.89
View
Add
Item# 67207
"Set of 3" stainless steel rectangular tube Propane (LP) "Main" Burners.  Fits Genesis II "LX" 3 and 6 burner models (340 and 640), "Model Years 2017 and Newer". The 6 burner model (640) requires "2" sets.  Each tube measures 19-1/2" long (including the rear mounting tab).  Features unique rectangular tube shape, slotted mounting tab on the back end, adjustable air shutter with insect screen on the valve end and an attached igniter electrode mounting bracket.  Installation instructions included. Genuine Weber Part.
In Stock
Retail: $123.12
$115.45
View
Add
Item# 67265
"Set of 2" stainless steel rectangular tube Propane (LP) "Main" Burners.  Fits 2 and 4 Burner Genesis II "LX" Propane (LP) Models (240 and 440) "Model Years 2017 and Newer". Four Burner Models (440) require 2 Sets.  Each tube measures 19-1/2" long (including the rear mounting tab). Features unique rectangular tube shape, slotted mounting tab on the back end, adjustable air shutter with insect screen on the valve end and an attached igniter electrode mounting bracket. Installation instructions included. Genuine Weber Part.
In Stock
Retail: $88.74
$86.15
View
Add
Item# 67489
"Set of 3" stainless steel rectangular tube Propane (LP) "Main" Burners.  Fits Genesis II "3" Burner, 310 Series, "Model Years 2017 and Newer".  Each tube measures 19-1/2" long (including the rear mounting tab).  Features unique rectangular tube shape, slotted mounting tab on the back end, adjustable air shutter with insect screen on the valve end and an attached igniter electrode mounting bracket.  Installation instructions included. Genuine Weber Part.
In Stock
Retail: $76.99
$71.85
View
Add
Item# PF80-10
ProFire stainless steel tube burner, used on many ProFire models. Burner measures 20" long and features unique flame hole "lip guard" on each side of the tube (helps to prevent food drippings from clogging the flame holes), an air adjustment shutter with set screw on the valve end and a mounting flange with off-center hole on the back end. Genuine ProFire Part.
In Stock
Retail: $56.57
$39.37
View
Add
Item# 70865
Stainless steel "Sear" Burner Tube, for Weber Summit 470, model years 2007 and newer. Burner tube measures 20-3/8" long. Features an adjustable air shutter, spider screen and attached heat shield flange on the valve end. The back end of the tube has a slotted mounting hole and an attached 5-1/4" long flame carry over channel. Genuine Weber Part.
In Stock
$34.40
View
Add
Item# 70866
Stainless steel "Sear" Burner Tube, for Weber Summit 660 and 670, model years 2007 and newer. Burner tube measures 20-3/8" long. Features an adjustable air shutter, spider screen and heat shield flange on the valve end. The back end of the tube has a slotted mounting hole and an attached 4-3/4" long flame carry over channel. Genuine Weber Part.
In Stock
Retail: $33.42
$30.85
View
Add
Item# 67553
"Set of 4" stainless steel main burner tubes for Weber Summit 400 Series, "model years 2007 and newer". Each burner tube measures 20-1/2" long with top side flame hole porting. All burners feature an air/fuel mixture adjustment shutter with insect screen on the venturi end and a forked mounting tab on the back end. Genuine Weber Part.
In Stock
$89.75
View
Add
Item# 67554
"Set of 6" stainless steel main burner tubes for Weber Summit 600 Series, "model years 2007 and newer". Each burner tube measures 20-1/2" long with top side flame hole porting. All burners feature an air/fuel mixture adjustment shutter with insect screen on the venturi end and a forked mounting tab on the back end. Genuine Weber Part.
In Stock
$133.45
View
Add
Item# 70306
"Individual" stainless steel burner tube for Summit 400 and 600 series "model years 2007 and newer". Burner tube measures 20-1/2" and is ported at the top. Features an air/fuel mixture adjustment shutter with insect screen on the venturi end and a forked mounting tab on the back end. More than one required, sold individually. (400 Series grills use 4 main burners, for full set of 4 see Part 67553 and 600 Series use 6 main burners for full set of 6 see Part 67554). Genuine Weber Part.
In Stock
Retail: $33.99
$25.38
View
Add
Item# 70307
"Smoker" burner for Weber Summit 400 and 600 series, "model years 2007 and newer".   20-1/2" long stainless steel tube with spider screen and air adjustment shutter. IMPORTANT: This burner tube cannot be substituted for the main burners. Genuine Weber Part.
In Stock
Retail: $42.18
$27.39
View
Add
Item# 85660
Stainless steel, complete "main" burner tube set.  Includes two right, two left and two crossover tubes.  Main burners are 20-1/2" long tip to tip and the crossover burner tubes are 7-1/8" long.  Fits 4 burner Summit Gold/Silver/Platinum models 2000 to 2006.  (Note: The extra smoker burner used on some models is NOT included, if needed see part 85661).  Genuine Weber Part.
In Stock
Retail: $76.99
$69.15
View
Add
Item# 85661
Stainless steel complete burner tube set, including the "smoker burner".  Set contains the "main" two left, two right, two crossover burner tubes and one smoker burner tube.  Main and smoker burner tubes are 20-1/2" tip to tip and the crossover burner tubes are 7-1/8" long.  Fits 4 burner Summit Gold/Silver/Platinum models, 2000 to 2006.  Genuine Weber Part.,
In Stock
Retail: $103.99
$85.90
View
Add
Item# 85662
Stainless steel complete "main" burner tube set.  Includes three right, three left and three crossover tubes.  Main burner tubes are 20-1/2" long tip to tip and the crossover burner tubes are 6-1/4" long.  Fits 6 burner Summit Gold/Platinum models 2000 to 2006.   (Note: The extra smoker burner used on some models is NOT included, if needed see part 85663).  Genuine Weber Part.
In Stock
Retail: $120.99
$99.65
View
Add
Item# 85663
Stainless steel complete burner tube set, including the "smoker burner".  Set contains the "main" three left, three right, three crossover burner tubes and one smoker burner tube.  Main and smoker burner tubes are 20-1/2" long tip to tip and the crossover burner tubes are 6-1/4" long.  Fits 6 burner Summit Gold/Platinum, model years 2000-2006.  Genuine Weber Part.
In Stock
Retail: $128.99
$112.91
View
Add
Item# WLFT1
20-7/8" long stainless steel straight tube burner. Fits Wolf BBQ And BBQ2 Series. Features an air/fuel mixture adjustment shutter, "dual row" flame holes for high efficiency performance and heavy gauge 304 grade stainless steel construction. Burner replacement instructions included. Replaces Wolf OEM Part 816268. Made In USA.
In Stock
Retail: $115.75
$71.35
View
Add
Item# 40428
Stainless steel burner tube set, includes 2 right, 2 left and 2 crossover burner tubes. Main burners are 21" long tip to tip and the crossover burner is 6-3/4" long.  Fits Summit 400 Series, "model years prior to 2000".  Genuine Weber parts.
In Stock
Retail: $84.99
$73.99
View
Add
Item# 60428
Stainless steel burner tube package includes 3 right, 3 left and 3 crossover tubes. Main burners are 21" long tip to tip and crossover burners are 6-3/4" long. For Summit 600, 625, 650 and 675 series gas grills, "model years prior to 2000". Genuine Weber parts.
In Stock
Retail: $118.99
$98.85
View
Add
Item# VIKT1
24" stainless steel straight burner tube with mounted drip shield fits many Viking grills. Made of heavy gauge stainless steel. The valve end features an adjustable air shutter and insect screen.  Replaces Viking OEM Burner Part number PA080051 and Drip Shield Part Number B2005324. 
In Stock
Retail: $90.95
$51.75
View
Add
Item# 10404

Two Genuine Weber Stainless Steel Tube Burners and one Crossover Flame Tube set for Weber Genesis Silver A, Spirit 500 and Spirit E-210 model years 2007 to 2012. Two 27in. Front and Rear Tube Burners, and one 10-1/2in. Gas/Flame Crossover Burner Tube. Weber stainless steel burners feature venturi's with built-in wire-mesh screen spider guards. Replacement hardware included. Genuine Weber Part, replaces Weber Part 7507.

Are you experiencing uneven heat in your Weber BBQ grill? Replace your burners with our Weber® Stainless Steel Tube Burner Set. Over time, your grill's original burners gas ports become blocked, cracked, or rusted, leading to uneven heat and reduced efficiency. Turn up the heat with a clean consistent flame by replacing old burners with a long lasting set of high quality stainless steel Weber® burners from Grillparts.com. Get even surface heat to your cooking grates, just like when your grill was new!

Fits these following Weber® gas grill models:

  • Weber Genesis Silver A
  • Weber Spirit 500 series
  • Weber Spirit 200 series

Set Includes:

  • (2) 27in. Front and Rear Stainless Steel Tube Weber Burners
  • (1) 10-1/2in. Gas/Flame Crossover Burner Tube
  • Mounting hardware
In Stock
Retail: $68.99
$58.99
View
Add
Item# 10460

Three Genuine Weber Stainless Steel Tube Burners and one Crossover Flame Tube set.  Two 28in. Front and Rear Tube Burners, one 27-3/8in. Center Tube Burner, and one 12-3/4in. Flame Crossover Burner Tube. Weber stainless steel burners feature venturi's with built-in wire-mesh screen spider guards. Replaces Weber Part# 7508.

Are you experiencing uneven heat in your Weber BBQ grill? Replace your burners with our Weber® Stainless Steel Tube Burner Set. Over time, your grill's original burners gas ports become blocked, cracked, or rusted, leading to uneven heat and reduced efficiency. Turn up the heat with a clean consistent flame by replacing old burners with a long lasting set of high quality stainless steel Weber® burners from Grillparts.com. Get even surface heat to your cooking grates, just like when your grill was new!

Fits these following Weber® gas grill models:

  • Weber Spirit E310
  • Weber Spirit 700
  • Weber 900
  • Weber Genesis Silver (B/C)
  • Weber Genesis Gold 2002 and newer
  • Weber Genesis Platinum 2002 and newer

Set Includes:

  • (2) 28in. Front and Rear Stainless Steel Tube Weber Burners
  • (1) 27-3/8in.  Center Stainless Steel Tube Weber Burner
  • (1) 12-3/4" Gas/Flame Crossover Burner Tube
  • Manifold mounting hardware


 

In Stock
Retail: $81.99
$71.99
View
Add
Item# 7506
Includes 29" front and rear burners, 28-1/2" center burner and 13-1/2" crossover burner. Features built-in wire screen venturi spider guards. Fits full size Genesis, Platinum and Gold models prior to 2002. Hardware included. Genuine Weber Part.
In Stock
$73.52
View
Add
Item# 20428
Includes 29-1/8" front and rear burners, 28-1/2" center burner and 13-1/2" crossover burner. Features built-in wire screen venturi spider guards. Fits full size Genesis, Platinum and Gold models prior to 2002.  Hardware included.  Replaces Part 7506.  Genuine Weber Part.
In Stock
$73.52
View
Add
Item# 67820
Stainless steel Weber Genesis 300 Series burner set, "model years 2007-2010". Includes the three main burners and the smaller crossover burner. The main burners measure 34-1/4" long and the crossover burner tube is 12-3/4" long. Front burner tube features the igniter mounting bracket for 2008-2010 models. (This set also replaces part 67722).  "Manifold" hardware and installation instructions included.  IMPORTANT:  The screw/posts for the forked end of the burner tubes are not included with this burner set, Weber considers those screw/posts as part of the firebox. Genuine Weber Part.
In Stock
Retail: $65.99
$59.99
View
Add
Item# PERF137-10L
ProFire left burner for "Performance Series" models. Stainless steel, U-shaped tube burner. Features adjustable air shutter. The tube length of the right hand (longest) section of this burner measures 16-3/4" and outside to outside measurement is 7".
In Stock
Retail: $110.05
$59.99
View
Add
Item# PERF137-10R
ProFire right burner for "Performance Series" models. Stainless steel, U-shaped tube burner. Features adjustable air shutter. The tube length of the left hand (longest) section of this burner measures 16-3/4" and outside to outside measurement is 7".
In Stock
Retail: $110.05
$59.99
View
Add
Item# PFBW
Stainless steel "U" shaped burner tube.  Measures 26" long X 7" wide.  Features attached flame hole drip shields.  Note: This burner is not compatible with igniter components.  The original equipment is no longer available.  Quality aftermarket part.
In Stock
Retail: $73.35
$44.65
View
Add
Item# 4594006
"U" Shaped burner, 29 inches total length from the top of the "U" to the tube ends. Total width 4-3/4" at widest point of shield (width of burner is 4-3/8"). Includes burner shield, support bracket with mounting hardware. NOTE: Igniter "Not Available" for this burner and it is "not" compatible with the original igniter components.
In Stock
Retail: $79.58
$39.05
View
Add
Item# 4594004
"U" Shaped tube burner, 30 1/2" inches total length from the top of the "U" to the tube ends; 4-7/8" wide. Includes burner shield, support bracket with mounting hardware. NOTE:  Igniter "Not Available" for this burner and it is "not" compatible with the original igniter components.
In Stock
$41.75
View
Add