Ignitors

grill parts: Summit Electrode/Collector Box With 35-1/2" Wire
Ignitors grill parts: Summit Electrode/Collector Box With 35-1/2" Wire (image #1) Ignitors grill parts: Summit Electrode/Collector Box With 35-1/2" Wire (image #2) Ignitors grill parts: Summit Electrode/Collector Box With 35-1/2" Wire (image #3)

Summit Electrode/Collector Box With 35-1/2" Wire

Item# IG45
This part is in stock. IN STOCK
Retail: $13.80
$8.35
Igniter collector box with ceramic electrode and molded in wire, for Weber Summit Silver/Gold/Platinum models. Wire is 35-1/2" long and terminates with a flat spade connector.

Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

  • Qty:
Item# G362-0023-W1
Electrode (for narrow 5/8" diameter burner tube) with 10" wire for Charbroil Professional and Commercial Series Tru-Infrared "2 burner models". Features attached gas collector box with burner mounting spring clamp. 2-1/2" white ceramic electrode insulator has a 10" long molded in wire. The wire terminates with a female spade fitting.  IMPORTANT: This electrode only fits Charbroils newer thin 5/8" diameter burner tubes.  Charbroil OEM Part.  (Replaces OEM Part G309-0M01-W1)
In Stock
$4.59
View
Add
Item# G466-0057-W1
Electrode (for narrow 5/8" diameter burner tube) with 20" long wire for Charbroil Professional, Signature, Commercial Series "Tru-Infrared" 3 and 4 burner models and Advantage/Signature Series "Conventional" 2, 3 and 4 burner models, "2015 and newer".  Features gas collector box/electrode with burner mounting spring clamp and a 3" white ceramic electrode insulator with a 20" long molded in wire. The wire terminates with a female spade fitting.  IMPORTANT: This electrode only fits Charbroils newer thin 5/8" diameter burner tubes.
In Stock
$4.99
View
Add
Item# 10342-E12
Igniter electrode and wire.  Features a 2" long white ceramic insulator with a molded in 11-1/2" long wire that terminates with a female flat spade connector.  Fits Broil King Signet/Sovereign and Regal models with "tube in tube" burners.  Genuine Broil King Part.
In Stock
$2.49
View
Add
Item# 10342-E13
Igniter electrode and wire.  Features a 2" long white ceramic insulator with a molded in 14" long wire that terminates with a female flat spade connector.  Fits Broil King Signet/Sovereign, Baron and Regal /Imperial models with "tube in tube" burners.  Genuine Broil King Part.
In Stock
$3.79
View
Add
Item# DCSIG40
DCS "Right" collector box and electrode with 15" molded in wire.  Fits older DCS models that require a "left" and "right" collector box.   Features "right side specific" collector box, 90 degree bend electrode tip with 2-1/2" long ceramic insulator and a 15" molded in wire that terminates with a "round" connector fitting. Replaces DCS OEM Part number  214268.
In Stock
Retail: $51.20
$31.20
View
Add
Item# DCSIG39
DCS "Left" collector box and electrode with 15" molded in wire.  Fits older DCS models that requre a "left" and "right" collector box.  Features "left side specific" collector box, 90 degree bend electrode tip with 2-1/2" long ceramic insulator and a 15" molded in wire that terminates with a "round" connector fitting.  Replaces DCS OEM part number 214269.
In Stock
Retail: $51.20
$31.20
View
Add
Item# IG41B
Igniter electrode for Viking center feed "U" shaped burner. Heavy duty, dual tipped electrode with 3" long white ceramic insulator and attached mounting bracket. Features a single male flat spade igniter wire terminal. (Replaces Viking OEM Part 008090).
In Stock
Retail: $51.20
$31.20
View
Add
Item# IG44
Igniter collector box with ceramic electrode and molded in wire, for Weber Summit Silver/Gold/Platinum models. Wire is 25-1/2" long and terminates with a flat spade connector.
In Stock
Retail: $13.10
$7.96
View
Add
Item# 3199-64
Main and side burner electrode assembly for FireMagic Echelon models, Pre-2012. Includes 1-3/4" long white ceramic insulated electrode with mounting bracket and hardware (one bolt with nut), dual molded-in 8" wires that terminate in a male molex connector and a 3-1/2" long 2 wire pig-tail adapter to enable retro fit to two flat female spade connectors. Genuine FireMagic Part.
In Stock
Retail: $83.00
$74.70
View
Add
Item# IG47B
Lynx ignition, stainless steel gas collector box with electrode and wire. Collector box measures 2-1/8" long X 7/8" wide. Overall length of the electrode is 2-3/4", (1-1/2" long white ceramic insulator and 1-1/4" long electrode tip. Includes mounting screw and molded-in 16" long wire that terminates with a "round" connector end fitting, for use with "rotary" spark generators. Comes fully assembled.  Replaces one each of  Lynx OEM Parts L12014 and L10077.
In Stock
Retail: $48.65
$27.79
View
Add
Item# 29102153
Burner igniter electrode for Charbroil Patio Bistro, Tru-Infrared models. Features "L" shaped electrode with attached mounting bracket and male spade wire terminal. Charbroil OEM Part.
In Stock
$3.59
View
Add
Item# 55710774
Burner electrode for Charbroil "PORTABLE" Patio Bistro Tru-Infrared models. Features "L" shaped electrode with molded in 8" wire and mounting bracket attached. Wire terminates with a female spade fitting. Mounting hardware, one screw, included.
In Stock
$5.10
View
Add
Item# IG-29
Stainless steel ignitor spark box with electrode and wire. Mounts between burners and ignites the gas as it flows through the burner tube. Measures 4-5/16" across the box and stands out approximately 3-1/2".
In Stock
Retail: $14.25
$8.85
View
Add
Item# DPP116
Igniter kit for Broilmaster "P3X/P4X" and "H3X/H4X" Series grills (model years 2011 and newer). Includes electrode mounting bracket with collector box(Part B101834), electrode with 16" wire(Part B101666), igniter wire protective sleeve(Part B102041), 15" grounding wire and 2 mounting screws. All wires terminate with flat female spade connectors. Genuine Broilmaster Part.
In Stock
Retail: $24.00
$21.60
View
Add
Item# IG37B
DCS bracketed electrode assembly. The electrode has a molded in 15 inch wire with round connector and is mounted under the bracket with the electrode tip bent 90 degrees into the spark box. Bracket measures 3" long X 1" wide.
In Stock
Retail: $13.50
$9.33
View
Add
Item# G458-9201-W1
Electrode with wire for Advantage Series 6 burner models (2015 and Newer). Features attached gas collector box and burner mounting spring clamp. 3" white ceramic electrode insulator has a 36" long molded in wire. The wire terminates with a female spade fitting.  Designed to fit Charbroil 5/8" diameter burner tube.
In Stock
$4.99
View
Add
Item# IG45
Igniter collector box with ceramic electrode and molded in wire, for Weber Summit Silver/Gold/Platinum models. Wire is 35-1/2" long and terminates with a flat spade connector.
In Stock
Retail: $13.80
$8.35
View
Add
Item# IG13BR

Gas Collector Box, Electrode and Wiring Assembly for Weber grill that utilize a manual Push-Button Piezo Style Spark Generator.

Electrode with with 19-1/2in. wires. The black molded in wire from the electrode has a round connector end and the white wire terminates with two flat female spade connector ends.  Preassembled into the Gas Collector Box for Weber Grills with Manual "Push-Button" Piezo Spark Generators. High quality after market part.

What’s Included:
(1) Gas Collector Box, Electrode & Wiring Assy. for Weber Piezo style plunger-push-button spark generators.
(See part# UP7B for replacement Spark Generator)
 

In Stock
Retail: $13.10
$8.65
View
Add
Item# IG-33
DCS electrode and enclosed collector/spark box assembly kit, for use with either Rotary Spark Generators or Electronic Ignition Modules (by utilizing the included adapter wire).  The kit includes one stainless steel collector/spark box, one electrode/white ceramic insulator with a 29-1/2" long molded-in wire and a 3" long adapter wire.  The adapter wire allows for conversion to a female spade terminal end, for connecting to an electronic ignition module.  Minor assembly required.  Replaces DCS OEM Part 211718.
In Stock
Retail: $28.10
$18.33
View
Add
Item# 62806
Igniter electrode set. This set includes 3 igniters, (each has molded spark box with wire), 4 wire clips and washers. The wires are color coded for easy installation. Fits Genesis 300 Series (310/320 only), model years 2011-2016 (with upfront controls). This set is the electrodes only, igniter module sold separately. Genuine Weber Part.
In Stock
Retail: $31.16
$26.37
View
Add
Item# G515-0014-W1
Electrode with wire and collector box for 1" DIAMETER main burner tube. Overall length (wire and electrode/collector box) is 39-1/4". Features "push-on" mounting clamp for easy installation and female spade connector on wire end.  IMPORTANT: This electrode only fits Charbroils 1" diameter burner tubes.
In Stock
$3.59
View
Add
Item# G350-0064-W1
Electrode with wire and collector box for 1" DIAMETER main burner tube. Overall length (wire and electrode/collector box) is 39-1/4". Features "push-on" mounting clamp for easy installation and female spade connector on wire end.  IMPORTANT: This electrode only fits Charbroils 1" diameter burner tubes.
In Stock
$3.59
View
Add
Item# IG40B
GE Monogram "Right" collector box and electrode with 15" molded in wire. Features "right side specific" collector box, 90 degree bend electrode tip with 2-1/2" long ceramic insulator and a 15" molded in wire that terminates with a "round" connector fitting. Replaces OEM part number  WB02X10659.
In Stock
Retail: $51.20
$31.20
View
Add
Item# IG-19
Electrode with wire includes wire insulating jacket. The ceramic portion hidden by the insulating wire is 3-3/4" long. Electrode tip is 1-7/8" to the tip where is bends 90 degrees. Wire length is 23-1/2" and terminates to a flat spade connector.
In Stock
Retail: $13.20
$10.15
View
Add
Item# IG-20
Burner ignitor electrode with 90 degree bend electrode tip and flat male spade wire connector end.  The overall length measures 2-3/4" tip to tip.  The mounting bracket to the tip of the electrode measures 1-1/8".  Includes mounting screw, washers and nut.
In Stock
Retail: $6.75
$4.60
View
Add
Item# IG-21
Ignitor gas collector box with electrode and 14" wire. This collector box extends out about 1-1/2 inches and the electrode length is 1/2" from the gas collector box. Mounts with single screw.
In Stock
Retail: $15.25
$9.20
View
Add
Item# IG-22
Ignitor gas collector box with electrode and wire. This collector box extends out about 4 inches and the electrode length is 3-1/4" from the gas collector box. Mounts with two screws.
In Stock
Retail: $15.25
$9.20
View
Add
Item# IG-23
Stainless steel ignitor spark box with electrode and wire. Mounts between burners and ignites the gas as it flows through the burner tube. Measures 5-5/16" across the box and stands out approximately 3-1/2".
In Stock
Retail: $15.25
$9.20
View
Add
Item# 30501047
3-burner collector box and electrode set. Kit includes three igniter collector boxes with ceramic electrodes and molded in wires. For Ducane Affinity grills. Two with 25-1/2" wires and one with a 35-1/2" wire. All wires have flat spade connectors.
In Stock
$21.46
View
Add
Item# 3199-37
Stainless steel crossover ignition channel box with mounting bracket. The length of the channel box is 4-1/4" and the mounting bracket measures 5-1/8" long. The mounting bracket features a single mounting screw hole.  Installation instructions included.  Fits FireMagic Elite and Custom 2 models, pre 2007. More than one required, sold individually. Genuine FireMagic Part.
In Stock
Retail: $75.00
$67.50
View
Add
Item# 30501048
4-burner collector box and electrode set. Kit includes four igniter collector boxes with ceramic electrodes and molded in wires. For Ducane Affinity grills. Includes two 25-1/2" wires and two 35-1/2" wires, all with flat spade connectors.
In Stock
$26.95
View
Add
Item# IG-17B
Stainless steel burner ignitor collector box and electrode assembly. Mounting stud length measures 2". Includes locking nuts as shown. Total length is 4" from the top to the bottom of the electrode. Wire connection at bottom takes a round connector.
In Stock
Retail: $11.00
$8.89
View
Add
Item# IG42B
Igniter electrode for Viking straight tube burner. Heavy duty, dual tipped electrode with 3-5/8" long white ceramic insulator and attached mounting bracket. Features a single male flat spade igniter wire terminal. (Replaces Viking OEM Part 008091).
In Stock
Retail: $51.20
$31.20
View
Add
Item# 5156119
Ignitor electrode. This electrode mounts to the bottom of the collector box and connects to the pushbutton wire.
In Stock
$5.69
View
Add
Item# B056482
Spark box and electrode assembly for use with a "rotary spark generator". Used on P3, D3, P4, D4, P5 and D5 models. 15" long wire connects to the rotary spark generator with a "round" terminal connector.  Genuine Broilmaster Part.
In Stock
Retail: $33.00
$29.70
View
Add
Item# IG5B
Tongue style collector box inserts under mounting clip found on many burners. Includes electrode and 20 inch connector wire which connects to "manual" pushbutton or rotary spark generator.  Burner not included, shown for display purposes only.
In Stock
Retail: $11.00
$7.50
View
Add
Item# IG13BE

Gas Collector Box, Electrode and Wiring Assembly for Weber Spirit 200 and 300 Series grills (2012 and Older) and Weber Genesis 300 Series model year 2007.

Electrode with with 19-1/2in. wires that terminate with flat female spade fittings, preassembled into the Gas Collector Box for Weber Grills with Electronic Ignition System. High quality after market part.

Fits the following Weber® Gas grills:

  • Weber Spirit 200 Series-manufactured in 2012 and prior years
  • Weber Spirit 300 Series-manufactured in 2012 and prior years
  • Weber Genesis 300 Series-manufactured in 2007

What’s Included:

  • (1) Gas Collector Box, Electrode & Wiring Assy. for Weber Spirit 200/300 (2012 and older) and Genesis 300 (2007) Model Electronic Ignitions
In Stock
Retail: $13.10
$8.65
View
Add
Item# IG39B
GE Monogram "Left" collector box and electrode with 15" molded in wire.  Features "left side specific" collector box, 90 degree bend electrode tip with 2-1/2" long ceramic insulator and a 15" molded in wire that terminates with a "round" connector fitting.  Replaces OEM part number WB02X10660.
In Stock
Retail: $51.20
$31.20
View
Add
Item# GGIB
Ignitor collector box and electrode assembly. The vented (2 holes in the back plate) collector box measures 2-1/2" long X 3/4" tall X 1-1/8" deep (the bottom plate extends outward 5/8" farther, towards the burner).  The electrode with ceramic insulator measures 2-1/2" long, has 1" of "all thread" to enable mounting position adjustments and a male flat spade terminal end, for the spark generator wire connection.  Assembly includes all necessary mounting hardware, one washer and lock nuts.  Fits MHP models JNR, WNK and TJK.
SOLD OUT: Expected In Stock 12/12/2024
Retail: $14.10
$10.85
View
Item# B100446
Spark box and electrode assembly for use with "electronic" spark generator B072218 (sold separately). Used on P3, D3, P4, D4, P5 and D5 models. 15" long wire connects to an "electronic" ignition module with a "female flat spade" terminal connector.  Genuine Broilmaster Part.
In Stock
Retail: $23.00
$20.70
View
Add
Item# G501-0010-W1
Main burner electrode with insulated wire and mounting bracket. Wire terminates with a female spade connector and is 12" in length. Electrode is 4-1/8" long and tip bends 90 degrees towards the burner.  Mounting screws included.
In Stock
$4.99
View
Add
Item# G511-0018-W1
Ignitor electrode with mounting clip and molded in wire. Electrode tip bends at a 90 degree angle. Wire length is 24".
In Stock
$6.49
View
Add
Item# 3199-45
Main burner igniter electrode and collector box assembly. Includes the collector box (measures 1-3/4" long X 1" wide), spring loaded white ceramic insulated electrode with flat male spade terminal end, mounting nut, spacer, rubber connection protector and 23" wire with flat female spade connector ends.  Fits FireMagic Aurora and Choice models. Genuine FireMagic Part.
In Stock
Retail: $61.00
$54.90
View
Add
Item# PF80-106
 Stainless steel Profire electrode holder and gas collector box assembly. The length of the channel box is 3-1/4" and the mounting bracket measures 4-1/4".
SOLD OUT: Expected In Stock 12/20/2024
Retail: $28.30
$19.15
View
Item# PF80-3828S
 Profire porcelain gas ignition electrode.  Molded in wire length is 28".  High temperature wire terminates in a heat shrinked round connector.
In Stock
Retail: $19.80
$14.99
View
Add
Item# 3199-61
Main burner igniter electrode and collector box assembly. Includes the collector box (measures 1-3/4" long X 1" wide) with attached mounting bracket, spring loaded white ceramic insulated electrode with flat male spade terminal end, mounting hardware, rubber connection protector, 33-1/2" wire with flat female spade connector ends, one "AAA" battery and installation instructions.  Fits FireMagic Elite, Regal 1 and 2, Custom 1 and 2, Monarch and Deluxe models.  Note: This electrode assembly can also be used in FireMagic Pre-2006 models that used part 3199-60.  Genuine FireMagic Part.
In Stock
Retail: $98.00
$88.20
View
Add
Item# 03118
Main burner electrode and collector box assembly. Features a mounting flange with mounting hardware, 42" long molded-in wire that ends in a flat female spade terminal fitting with protective sleeve. Overall length of the electrode assembly measures 3-1/2", from the mounting flange to the end of the collector box measures 2-3/4". Fits a variety of Master Forge and other brand/models.
In Stock
Retail: $11.67
$6.56
View
Add
Item# 1769-89

Heavy duty "L" shaped, main burner Electrode. Features a 1-1/2in. long white ceramic insulator with mounting bracket, flat male spade terminal end for the wire connection and a 90 degree bend electrode tip.  Quality aftermarket part. (Electrode Only, see Item #IG50 for Collector Box, sold separately).

Why do you need a new Electrode? Over time, grease, food residue, and other contaminants can build upon the electrodes, hindering their ability to generate a spark and ignite gas. Electrodes can wear out over time due to exposure to heat and corrosion. Replace your electrodes if they are visibly damaged, worn and can no longer be cleaned/serviced.

Included:

  • 1 L-shaped Electrode (Replaces Alfresco OEM Part 210-0189)

Fits the following Alfresco Models: 
AGBQ-30, AGBQ-30C, AGBQ-30CD, AGBQ-30IR, AGBQ-30IRC, AGBQ-30SZ, AGBQ-30SZC, AGBQ-42, AGBQ-42C, AGBQ-42SZ, AGBQ-42SZC, AGBQ-56, AGBQ-56BFG, ALX2-30, ALX2-30C, ALX2-30CD, ALX2-30IR, ALX2-30IRC, ALX2-30IRCD, ALX2-30SZ, ALX2-30SZC, ALX2-30SZCD, ALX2-42, ALX2-42C, ALX2-42RFG, ALX2-42SZ, ALX2-42SZC, ALX2-42SZRFG, ALX2-56, ALX2-56BFG, ALX2-56BFGC, ALX2-56BFGR, ALX2-56C, ALX2-56SZ, ALX2-56SZC, ALX242SZL 

In Stock
$20.59
View
Add
Item# IG33L
DCS main burner ignition electrode with 41-1/2' long wire and enclosed collector/spark box assembly,for use with "electronic ignition modules"..  Extra long wired length enables "reach" for the electrode located farthest away from the electronic ignition module on 48" models.   The assembly includes one stainless steel collector/spark box and one electrode with a 41-1/2" long molded in wire and white ceramic insulator.  The wire has a female flat spade terminal connector end (for connecting to electronic ignition modules).
In Stock
Retail: $28.10
$18.33
View
Add
Item# G460-0018-W1
Electrode (for narrow 5/8" diameter burner tube) with 24" long molded-in wire. Features burner mount spring clamp and 3" long white ceramic insulator. Fits Charbroil Performance 3 burner models, "2015 and newer". Designed to fit 5/8" diameter burner tube.  Genuine Charbroil Part.
In Stock
$4.09
View
Add
Item# 1804-100
Heavy duty "dual" tip 3-3/4" long electrode assembly. Fits many Solaire and other brand models. Features a 1-1/2" long ceramic insulator with mounting bracket and a 15" long molded in wire with a 90 degree female spade connector end (for connecting to electronic ignition modules).
In Stock
$19.99
View
Add
Item# G515-0067-W1
Electrode With Wire Collector For Main Burner
In Stock
$3.59
View
Add
Item# G432-8S01-W1
Main burner collector box and electrode with 14" long molded in wire. Features burner mount spring clamp and female spade connector end (for connecting to an electronic ignition module). Fits Charbroil Performance/Advantage 4, 5 and 6 burner models, "2017 and newer". Designed to fit a 5/8" diameter burner tube. Genuine Charbroil Part.
In Stock
$4.99
View
Add
Item# 67137
Igniter electrode with 28" long wires. Fits Weber "Spirit II" 210 Series (2017 and newer). Features an electrode with 2-7/8" long ceramic collector box/insulator and two 28" long wires with "color coded" female flat spade connector ends. Installation instructions included. Genuine Weber Part.
SOLD OUT: Expected In Stock 12/6/2024
$28.00
View
Item# 3199-37
Stainless steel crossover ignition channel box with mounting bracket. The length of the channel box is 4-1/4" and the mounting bracket measures 5-1/8" long. The mounting bracket features a single mounting screw hole.  Installation instructions included.  Fits FireMagic Elite and Custom 2 models, pre 2007. More than one required, sold individually. Genuine FireMagic Part.
In Stock
Retail: $75.00
$67.50
View
Add
Item# 03199
FireMagic bracketed electrode kit for older (Pre-2006) models. Includes part 03198(adapter wire). Features dual electrodes in a 3" long stainless steel collector box with 26" wire ending in a female spade connector, one 20-1/2" grounding wire and mounting hardware (2 screws, 3 nuts and metal plate). Replaces FireMagic OEM electrode part 3199-15 and 3199-60.
In Stock
Retail: $48.97
$27.26
View
Add
Item# 04430
Main burner electrode with molded in 43" long wire that terminates with a female flat spade fitting.  Also includes an adapter wire with male spade and female round end fittings that will allow for connecting to either an electronic or a manual (rotary or push button) spark generator.  Features a 2-7/8" long white ceramic insulator with a 90 degree electrode tip and an in-line mounting tab with 2 screw holes. This electrode is designed to mount directly onto the main burner tube. Mounting hardware "not" included. Fits many Charbroil, Master Forge and Kenmore models as well as many other brands/models.
In Stock
Retail: $14.09
$6.95
View
Add
Item# 05038
Main burner "electrode and collector box with wire". Features a 2" long white ceramic insulator, vented collector box, 28" long molded-in wire with flat female spade connector and an "L" shaped mounting bracket with 2 screw holes. This mounting bracket is specifically designed to fit onto the Master Forge cast iron burner, part CIMF1. Fits a variety of Master Forge models. (Burner not included, shown for display purposes only.)
In Stock
Retail: $13.97
$7.57
View
Add
Item# 67055
Igniter electrode with 32" long wires. Fits Weber "Spirit II" 310 Series (2017 and newer). Features an electrode with 2-7/8" long ceramic collector box/insulator and two 32" long wires with "color coded" female flat spade connector ends. Installation instructions included. Genuine Weber Part.
SOLD OUT: Expected In Stock 12/6/2024
$28.00
View
Item# IG50

Collector Box/Shield for main burner igniter electrode. L-shaped Collector Box with 1in. channels and an overall dimension of 3in. x 2-1/4in. Constructed of high quality 304 Grade stainless steel for long life. Features a mounting bracket/tab with a single screw hole. 

Why a new Collector Box? During the ignition process, if the burner fails to ignite, the unburned gas flows into the gas collector box instead of lingering around the burner. This reduces the risk of a sudden ignition or flare-up when the burner is eventually ignited. Gas collector boxes need to be replaced if they become loose, damaged or badly corroded.

Includes:

  • 1 Collector Box/Shield, Stainless Steel, 3in. x 2-1/4in.
  • Replaces Alfresco OEM Part 100-1848.
  • Electrode sold separately, see Item #1769-89

Fits the following Alfresco Models: 
AGBQ-30, AGBQ-30C, AGBQ-30CD, AGBQ-30IR, AGBQ-30IRC, AGBQ-30SZ, AGBQ-30SZC, AGBQ-42, AGBQ-42C, AGBQ-42SZ, AGBQ-42SZC, AGBQ-56, AGBQ-56BFG, ALX2-30, ALX2-30C, ALX2-30CD, ALX2-30IR, ALX2-30IRC, ALX2-30IRCD, ALX2-30SZ, ALX2-30SZC, ALX2-30SZCD, ALX2-42, ALX2-42C, ALX2-42RFG, ALX2-42SZ, ALX2-42SZC, ALX2-42SZRFG, ALX2-56, ALX2-56BFG, ALX2-56BFGC, ALX2-56BFGR, ALX2-56C, ALX2-56SZ, ALX2-56SZC, ALX242SZL

In Stock
Retail: $40.45
$25.65
View
Add
Item# HOLLELECT
Heavy duty "dual tipped" electrode with mounting tab and molded-in 13" long wire that terminates with a round connector end fitting (to connect to the rotary spark generator). The overall length of the electrode assembly is 4", which includes the 2" long white ceramic insulator. Fits many Holland models.  Quality Aftermarket Part. Replaces OEM Parts HGP147510, SG4-751.
In Stock
Retail: $40.45
$24.50
View
Add
Item# 1659-18

Heavy duty, "dual tipped" electrode. Features a 1-1/2" long white ceramic insulator, 1/4" wide flat male spade connector terminal and a mounting flange. The "overall" length (including the male spade connector) is 3-1/2". From the mounting flange to the tips of the curved electrodes measures 2-1/8". Fits a variety off Dacor and many other brands/models. Replaces Dacor OEM Part 72164.

Fits Dacor Models: EOG303, EOG36, EOG52, OB36, OB52, OBS36, OBS52

In Stock
$15.39
View
Add
Item# 24-B-04T

Genuine AOG (American Outdoor Grill) Igniter Assembly; Includes ceramic insulator and electrode with attachment wire, mounted to flash tube for main burners. This assembly mounts to the main burner gas control valve on AOG T-Series Grills manufactured in 2014 and newer with Flame Thrower gas valves.

Why do you need a new AOG Electrode and Flash Tube? Over time, grease, food residue, and other contaminants can build upon the electrodes, hindering their ability to generate a spark and ignite gas. Electrodes can wear out over time due to exposure to heat and corrosion. Replace your electrodes if they are visibly damaged, worn and can no longer be cleaned/serviced.

Whats Included:

  • (1) 2-7/8" long flash tube
  • (1) Mounted white ceramic insulator and electrode with molded-in 4-7/8in. wire with flat female spade connector.
In Stock
Retail: $55.00
$49.50
View
Add
Item# WLFTEFT
Replacement igniter flash tube for Wolf OG Series and many Twin Eagles models. The vertical and 45 degree segments each measure 2-1/2" long. Features an attached mounting flange with 2 elongated screw holes and an opening on the backside of the vertical segment for the electrode tip. Made of 304 Grade Stainless Steel. (Replaces Wolf OEM Part 814532)
In Stock
Retail: $60.75
$35.75
View
Add
Item# 24-B-04

Genuine AOG (American Outdoor Grills) Igniter Electrode and Collector Box Assembly (for main U burners), including a 23in. ignition wire with flat female spade ends and connection protector.

Ignitors are the spark plugs of your grill, igniting the flames and keeping your grill ready-to-go.  The collector box's job to corral gas and create a ground for those sparks and direct them to the appropriate burner. With a fresh electrode and collector box, you're not just fixing a problem – you're unleashing a blaze of glory.

Fitment:

  • American Outdoor Grill (AOG) L-Series models manufactured prior to 2015.
  • AOG Models: 24NB, 24NG, 24PC, 24PC-00SP, 30NB, 30NB-00SP, 36NB, 36NB-00SP, 36PC

Sold Individually. 24in. AOG Grills require (2); 30in. and 36in. Grills require (3)

What’s Included:

  • (1) Ignitor Electrode
  • (1) Collector Box (1-3/4in. x 1in.)
  • (1) 23in. ignition wire with female spade connector ends
  • (1) Connection Protector Sleeve

What’s More:
There are a few reasons why an ignitor might decide to call it quits. It could be as simple as a buildup of grease or gunk, gumming up the works and preventing the spark from igniting the burner. Or maybe theres cracked ceramic internally shorting-out or it's just worn out from years of faithful service, like a soldier who's seen one too many battles. Get your grill fired up consistently with a new Genuine AOG (American Outdoor Grills) Igniter Electrode and Collector Box Assembly from Grillparts.com

In Stock
Retail: $55.00
$49.50
View
Add
Item# BLZ-32-058

Genuine Blaze® Curved Ignition FlashTube for Blaze Grills Traditional Models. The flash tube enables the ability to manually light the main burners in the event that there is a malfunction with the electronic ignition system.

  • (1) Blaze® Ignition Flash Tube for main burners:
  • Measures 6-3/4in. long
  • Attached mounting strap with 2 screw holes.
  • Fits Blaze Traditional 3, 4 and 5 burner models.
  • Genuine Blaze Part.
In Stock
$9.39
View
Add
Item# 04022
3-5/8" long main burner igniter electrode with mounting bracket. Features a 90 degree bend electrode tip, 3" long white ceramic insulator with attached mounting bracket and a flat male spade wire terminal. Mounting hardware included. Fits a variety of Brinkmann, Kenmore, Master Forge, Members Mark/Sams Club models.
In Stock
Retail: $7.97
$4.41
View
Add
Item# BLZ-32-042

Genuine Blaze® Ignitor Electrode and Wire for Rear Burner/Rotisserie on Blaze Grills Traditional Models. Features a heavy duty dual tipped electrode with white ceramic insulator and mounting bracket, along with a 38in. high temp insulated wire with male flat spade connector end.

  • (1) Genuine Blaze® Ignitor Electrode and Wire for Rear Burner/Rotisserie:
  • Fits Blaze Grills Traditional Models.
  • Heavy duty dual tipped electrode with white ceramic insulator and mounting bracket
  • 38in. high temp insulated wire with male flat spade connector end.
In Stock
$21.71
View
Add
Item# 3199-46

Genuine AOG/FireMagic Six Output Port Ignition Module for American Outdoor Grill L-Series grills and FireMagic Aurora Models (Pre. 2015) that feature side burners/rotisserie back burners.

AOG/FireMagic 6-Output Port Output Spark Generator measures 4-5/8in. (including mounting tab). Features eight male flat spade terminals, (6) output for electrodes and (2) inputs for the push button switch, and one 12in. grounding wire. Snap-in style mounting tabs.

Why a new AOG grill ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your AOG/Firemagic Six Port Output Ignition Module and light your way to a better grilling experience!

What’s Included:

  • (1) Genuine AOG/FireMagic 6-Output Port Spark Generator Ignition Module
In Stock
Retail: $70.00
$63.00
View
Add
Item# 1851-17

Four output Quikliter electronic ignition module, powered by a single “AA” battery. 4-3/4in. x 1-7/8in. mounting plate included (pre-attached). The module features a battery chamber cap, four output color coded male flat spade terminals (for the electrodes) and two input male flat spade terminals (for the ignition switch). Replaces Alfresco OEM Part  2011-24, and other Brands and Models. 

When an electronic ignition module fails, it typically results in the inability to ignite the grill's burners with the push of a button or turn of a knob. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Over time, outdoor elements and the heat of the grill wreak havoc on the materials and components used in the module and cause failure. Replace your ignition module and light your way to a better grilling experience!

Includes:

  • 1 Four output Quikliter electronic ignition module. 
  • Mounting Plate with 4 holes, module pre-attached.
  • Igniter includes battery Cap
  • Requires 1 AA Battery (AA battery not included)

Fitment:

  • Replaces Alfresco OEM Part 2011-24, and other Brands and Models such as Viking.
In Stock
$26.39
View
Add
Item# G350-0017-W1
2 output "AA" electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the ignition switch and 2 output terminals for the electrodes.  IMPORTANT: This module requires a remote ignition switch, see part G515-0017-W7, sold separately.  Genuine Charbroil Part.
In Stock
$13.69
View
Add
Item# FMSG2
Universal "2 output" electronic spark generator with push button cap.  Features 2 male spade output terminals on the back side, a soft rubber top push button with chrome finish bezel, module mounting lock ring and a clear epoxy encapsulated coil.  Requires a 3/4" or 13/16" mounting hole.  Uses one "AAA" battery, (not included).  Quality Aftermarket Part.  Fits FireMagic Regal 1 and 2, Custom 1 and 2, Elite, Monarch, Deluxe and all FireMagic Side/Power burners. Replaces FireMagic OEM Parts 3199-47 and 3199-32.
SOLD OUT: Expected In Stock 12/12/2024
$22.92
View
Item# FMSG4
Universal "4 output" electronic spark generator with push button cap.  Features 4 male spade output terminals on the back side, a soft rubber top push button with chrome finish bezel, module mounting lock ring and dual clear epoxy encapsulated coils.  Requires a 3/4" or 13/16" mounting hole.  Uses one "AAA" battery, (not included). Quality Aftermarket Part.  Fits FireMagic Regal 1 and 2 and Custom 1 and 2 models with rotisserie back burners. Replaces FireMagic OEM Part 3199-48.
SOLD OUT: Expected In Stock 12/12/2024
Retail: $34.20
$20.99
View
Item# 10342-247
Four output "AAA" ignition module with push button battery cap and module mounting lock ring nut.  Measures 2-5/8" long X 2" wide.  Features 4 flat spade output terminals on the back.  Fits Broil King Signet/Sovereign models with "tube in tube" burners.  Genuine Broil King Part.
In Stock
$13.35
View
Add
Item# G511-0055-W1
4 output "AA" electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the ignition switch and 4 output terminals for the electrodes. IMPORTANT: This module requires a remote ignition switch, see part G515-0017-W7, sold separately. Genuine Charbroil Part.
In Stock
$18.69
View
Add
Item# IGEIB2B

Universal gas grill 2 output electronic ignition module with push button cap that utilizes one AAA Battery (not included).  Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (2) male spade output terminals on the back side.

Requires a 3/4in. or 13/16in. mounting hole.

Why a new electronic ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your 2 Output Port Electronic Ignition Module and light your way to a better grilling experience!

What’s Included:

  • (1) Universal Electronic Ignition Module with Push Button - 2 Output 
SOLD OUT: Expected In Stock 12/12/2024
Retail: $35.20
$22.92
View
Item# G515-0030-W2
5 output "AA"  electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the remote ignition switch and 5 output terminals for the electrodes.  IMPORTANT: This module requires a remote ignition switch, see part G515-0017-W7, sold separately.  Genuine Charbroil Part.
In Stock
$17.99
View
Add
Item# IGEIB3B
3 output "AAA" electronic spark generator. Features three male spade output wire terminals on the back side, clear epoxy encapsulated coil, module mounting lock ring and a push button battery cap. Requires a 3/4" or 13/16" mounting hole. Requires one "AAA" battery, not included.
In Stock
Retail: $35.20
$20.92
View
Add
Item# 81315

Weber Two Output Snap-In Mounting Electronic Ignition Module With Twist-to-Lock Push Button Battery Cap, Weber Genesis 300 Series (2007-2010) and Weber Spirit 300 Series (2007-2012) Models with Electronic Ignition. Utilizes one AAA Battery (not included). Features an attached metal heat shield, snap-in tabs for module mounting, 2 male flat spade color-coded output terminals and a gray Twist-to-Lock style push button/battery cap with lightning bolt symbol. 

Why a new electronic ignition module for your Weber? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your Weber 2 Output Port Electronic Ignition Module and light your way to a better grilling experience!

Fits Genesis 300 Series (2007-2010) and Spirit 300 Series (2007-2012) Models with Electronic Ignition.

What’s Included:

  • (1) Weber Push Button Start Electronic Ignition Module with 2 Outputs
  • Attached metal heat shield
  • Snap in mounting via tabs on module
  • 2 male flat spade color-coded output terminals
  • Twist-to-Lock Push button/battery cap with lightning bolt icon
In Stock
$18.49
View
Add
Item# 80453
Electronic spark generator for Weber Q models. Includes 2 pole spark generator, battery and push button. Fits Q120, Q220, Q320 models.
In Stock
$30.40
View
Add
Item# 10342-245
Two output "AAA" electronic ignition module.  Includes push button cap with battery connection spring and mounting locknut ring.  Features two output terminals on back of the module.  Fits a variety of Broil King Signet and Sovereign models with "tube in tube" burners.  Genuine Broil King Part.
In Stock
$12.80
View
Add
Item# 80007390
4 output-connector, electronic ignition module with chrome plastic battery cap. Features 2 input terminals on the back for the ignition switch. Requires a AA battery(not included).
In Stock
$18.49
View
Add
Item# 69927
"AAA" ignition module for Weber Q1200/Q2200/3200 model years 2014 and newer. Includes the push button battery cap, one "AAA" battery and installation instructions.  Genuine Weber Part.
In Stock
Retail: $30.99
$25.65
View
Add
Item# IGEIB1B
Single output "AAA" electronic spark generator. Features one male spade output wire terminal on the back side, clear epoxy encapsulated coil, module mounting lock ring and a push button battery cap. Requires a 3/4" or 13/16" mounting hole. Requires one "AAA" battery, not included.
In Stock
Retail: $34.20
$20.57
View
Add
Item# 88826
Weber Genesis 300 Series (Model Years 2011-2016) "AA" spark ignition module with heat shield. Features 4 color coded male flat spade output terminals, for easy wire connections/installation. Battery not included.  Important:  This module requires a mounting lock ring and a push button battery cap which are "NOT" included.  See Part 40277202, sold separately.
In Stock
$16.39
View
Add
Item# G513-0021-W1
6 output-connector, electronic ignition module with chrome plastic battery cap. Features 2 input terminals on the back for the ignition switch. Requires a AA battery (not included).
In Stock
$15.17
View
Add
Item# IGEIB12B
DCS Eltec 18351 electronic spark generator and push button. Generator has 9V battery terminals mounted on side. Six output terminals plus two input terminals for the push button are located on the back.  Replaces DCS OEM Part 212334P.
In Stock
Retail: $80.00
$53.50
View
Add
Item# 10342-42
Two output "AA" electronic ignition module, "requires a remote switch", see part 25070-93 (sold separately) .  Measures 2-5/8" long X 2" wide.  Features 2 output flat male spade terminals (for the electrodes) and 2 input flat male spade terminals (for the switch), on the back.  Includes the battery cap with spring and the module mounting lock ring nut.  Fits a variety of Broil King Baron and Regal models, with "tube in tube" burners. Also fits many other brand/models.  Genuine Broil King Part.
In Stock
$12.99
View
Add
Item# 69848

Weber Two Output Electronic Ignition Module for Weber® Spirit 210, Spirit 310 Series Models manufactured in 2013 and newer with Electronic Ignition. Utilizes one AA Battery (not included). Features a battery cap, two color coded male spade output terminals for the electrode and two male spade input terminals for the push button switch.  Mounting hardware and installation instructions included. 

Why a new electronic ignition module for your Weber grill? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your Weber 2 Output Port Electronic Ignition Module and light your way to a better grilling experience!

Fits Weber® Spirit 210 and Weber® Spirit 310 Series Models with Electronic Ignition manufactured in 2013 and afterwards.

What’s Included:

  • (1) Weber Push Button Start Electronic Ignition Module with 2 Outputs for 2013 and newer Weber Spirit 210 and Spirit 310 models.
  • Mounting hardware and installation instructions included.
  • Genuine Weber Part. 
In Stock
$24.50
View
Add
Item# IGEIB4B

Universal gas grill 4 output electronic ignition module with push button cap that utilizes one AAA Battery (not included).  Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (2) male spade output terminals on the back side.

Requires a 3/4in. or 13/16in. mounting hole.

Why a new electronic ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your 4 Output Port Electronic Ignition Module and light your way to a better grilling experience!

What’s Included:

  • (1) Universal Electronic Ignition Module with Push Button - 4 Output
SOLD OUT: Expected In Stock 12/12/2024
Retail: $35.20
$20.99
View
Item# 10342-45
Five output "AA" electronic ignition module, "requires a remote switch", see part 25070-93 (sold separately).   Measures 2-5/8" long X 2" wide.  Features 5 output flat male spade terminals (for the electrodes) and 2 input flat male spade terminals (for the switch), on the back.  Includes the battery cap with spring and the module mounting lock ring nut.  Fits a variety of Broil King Baron and Regal/Imperial models, with "tube in tube" burners.   Also fits many other brand/models.  Genuine Broil King Part.
In Stock
$14.55
View
Add
Item# 1851-16

Two output Quikliter electronic ignition module, powered by a single “AA” battery. 3-7/8in. x 1-7/8in. mounting plate included (pre-attached). The module features a battery chamber cap, two output color coded male flat spade terminals (for the electrodes) and two input male flat spade terminals (for the ignition switch). Replaces Alfresco OEM Part 2011-23, and other Brands and Models. 

When an electronic ignition module fails, it typically results in the inability to ignite the grill's burners with the push of a button or turn of a knob. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Over time, outdoor elements and the heat of the grill wreak havoc on the materials and components used in the module and cause failure. Replace your ignition module and light your way to a better grilling experience!

Includes:

  • 1 Two output Quikliter electronic ignition module. 
  • Mounting Plate with 4 holes, module pre-attached.
  • Igniter includes battery Cap
  • Requires 1 AA Battery (AA battery not included)

Fitment:

  • Replaces Alfresco OEM Part 2011-23, and other Brands and Models such as Viking.
  • Note: For Alfresco Model LX2 with a "diagonal" mounting plate, modifications to the location of the screw holes will be required.
In Stock
$25.39
View
Add
Item# 10342-44
Four output "AA" electronic ignition module, "requires a remote switch", see part 25070-93 (sold separately).   Measures 2-5/8" long X 2" wide.  Features 4 output flat male spade terminals (for the electrodes) and 2 input flat male spade terminals (for the switch), on the back.  Includes the battery cap with spring and the module mounting lock ring nut.  Fits a variety of Broil King Baron and Regal models, with "tube in tube" burners. Also fits many other brand/models.  Genuine Broil King Part.
In Stock
$13.25
View
Add
Item# B072218
"AA" electronic igniter spark generator. Includes push button cap, internal battery connection spring and mounting locknut. Features two output terminals on back of the module.  Genuine Broilmaster Part.
In Stock
Retail: $25.00
$22.50
View
Add
Item# L24-B-49
Two output, 9 volt spark generator/ignition module. Fits a variety of Lynx/Sedona models without IR backburners. Measures 3-1/2" long (including mounting tab). Features 4 male flat spade terminals, (2 output for electrodes and 2 input for the push button switch) and "snap-in" style mounting tabs.  Replaces LYNX OEM Part 31162.
In Stock
Retail: $40.00
$36.00
View
Add
Item# 10342-43
Three output "AA" electronic ignition module, requires a remote switch, see part 25070-93 (sold separately).   Measures 2-5/8" long X 2" wide. Features 3 output flat male spade terminals (for the electrodes) and 2 input flat male spade terminals (for the switch), on the back. Includes the battery cap with spring and the module mounting lock ring nut. Fits a variety of Broil King Baron and Regal models, with "tube in tube" burners. Also fits many other brand/models. Genuine Broil King Part.
In Stock
$13.25
View
Add
Item# GE3199-44
Four output ignition module.  Fits a variety of GE Monogram models.  Module measures 3-1/2" long (including mounting tab). Features 6 male flat spade terminals, (4 output for electrodes and 2 input for the push button switch) and "snap-in" style mounting tabs. One 12" grounding wire included.
In Stock
Retail: $63.00
$56.70
View
Add
Item# IGEIB14B
DCS Eltec 4-output electronic spark generator and push button. Generator has an enclosure for a 9V battery on the back side. Features four output terminals plus two input terminals for the push button switch.  Replaces DCS OEM Part 212333P.
In Stock
Retail: $70.00
$44.12
View
Add
Item# IGEIB6B
Universal 6 output "AA" ignition module with soft push button battery cap. Features 6 output terminals on the back. Mounting hole needs to be at least 7/8" diameter. Battery not included.
In Stock
Retail: $35.20
$20.92
View
Add
Item# 3199-44

Genuine AOG/FireMagic Four Port Output Ignition Module for American Outdoor Grill L-Series grills and FireMagic Aurora Models (Pre. 2015) and A53s, A43s that feature side burners/rotisserie back burners.

AOG/FireMagic 4-Output Port Output Spark Generator measures 3-1/2in. (including mounting tab). Features six male flat spade terminals, (4) output for electrodes and (2) inputs for the push button switch, and one 12in. grounding wire. Snap-in style mounting tabs.

Why a new AOG grill ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your AOG/Firemagic Four Port Output Ignition Module and light your way to a better grilling experience!

What’s Included:

  • (1) Genuine AOG/FireMagic 4-Output Port Spark Generator Ignition Module
In Stock
Retail: $63.00
$56.70
View
Add
Item# G409-0021-W1
Two output "AA" electronic ignition module with push button battery cap. Features 2 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Fits Charbroil Performance, Classic and Kenmore models as well as many other brands/models.
In Stock
$10.99
View
Add
Item# 29102020
Single output "AAA" ignition module with battery spring/cap and lock nut for Charbroil Patio Bistro Tru-Infrared models. Features 3 terminals on the back side, 2 for the ignition switch wires and one output terminal for the igniter electrode.  IMPORTANT: This module requires a remote switch, see part 55710881 or 55710874 (Portable Model Only), sold separately.  Genuine Charbroil OEM Part.
In Stock
$9.99
View
Add
Item# L3199-44
Four output 9 volt spark generator/ignition module. Measures 3-1/2" long (including mounting tab). Features 6 male flat spade terminals, (4 output for electrodes and 2 input for the push button switch) and "snap-in" style mounting tabs. One 12" grounding wire included. Replaces LYNX OEM Part 31161.
In Stock
Retail: $63.00
$56.70
View
Add
Item# 69849

Genuine Weber Four Output Electronic Ignition Module for Weber® Spirit 220, 320, and 330 Series Models with Side Burners featuring Electronic Ignition, manufactured in 2013 and afterwards. Utilizes one AA Battery (not included). Features a battery cap, 4 color coded male spade output terminals (for the electrodes and ground wires) and 2 male spade input terminals for the push button switch wires.  Mounting hardware and installation instructions included.

Why a new electronic ignition module for your Weber grill? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your Weber 4 Output Port Electronic Ignition Module and light your way to a better grilling experience!

What’s Included:

  • (1) Weber Push Button Start Electronic Ignition Module with 4 Outputs for 2013 and newer Weber Spirit 220, 320, and 330 models.
  • Mounting hardware and installation instructions included.
  • Genuine Weber Part.
In Stock
Retail: $26.83
$19.50
View
Add
Item# G470-5503-W1
Two output "AAA" electronic igniter spark generator. Includes push button cap with internal battery connection spring and module mounting locknut. Features two output terminals on back of the module. Fits a variety of ProFire models, Charbroil Advantage Series 2, 4 and 6 burner modlels (2015 and newer), older Charbroil Classic models as well as many other brands/models. Genuine Charbroil Part. (Replaces Part F401-0012-W1).
In Stock
$10.49
View
Add
Item# 67052
Two output, "AA" electronic ignition module for Weber "Spirit II" 200/300 Series, model years 2017 and newer. Features a battery cap, two color coded male spade output terminals for the electrode and two male spade input terminals for the push button switch. Mounting hardware and installation instructions included. Genuine Weber Part.
In Stock
$26.36
View
Add
Item# 1836-32

Weber Two Output Electronic Ignition Module With Screw-On Push Button Battery Cap for Weber® Spirit 200, Spirit 300 Series Models 2012 and Older with Electronic Ignition. Utilizes one AAA Battery (not included). Features an attached metal heat shield, module mounting jam nut/lock ring, 2 male flat spade color-coded output terminals and a gray screw-on style push button/battery cap with lightning bolt symbol. 

Why a new electronic ignition module for your Weber? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your Weber 2 Output Port Electronic Ignition Module and light your way to a better grilling experience!

Fits Weber® Spirit 200 and Weber® Spirit 300 Series Models with Electronic Ignition manufactured in 2012 and prior years.

What’s Included:

  • (1) Weber Push Button Start Electronic Ignition Module with 2 Outputs for 2012 and Older Spirit 200 and Spirit 300 models.
  • Attached metal heat shield
  • Module mounting jam nut/lock ring
  • 2 male flat spade color-coded output terminals
  • Push button/battery cap with lightning bolt icon 
In Stock
$17.69
View
Add
Item# G321-5202-W1
Single output "AAA" electronic ignition module. Features a push button/battery cap with spring, module mounting lock ring/jam nut and one male spade output terminal. Genuine Charbroil Part.
In Stock
$9.99
View
Add
Item# 03380
Five output "AA" electronic ignition module with push button battery cap. Features 5 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Module measures 3-3/8" long X 2" wide. Battery not included.
In Stock
Retail: $48.97
$27.26
View
Add
Item# 03333
Three output "AA" electronic ignition module with push button battery cap. Features 3 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Battery not included.
In Stock
$18.57
View
Add
Item# 03340
Four output "AA" electronic ignition module with push button battery cap. Features 4 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Battery not included.
In Stock
Retail: $37.92
$17.92
View
Add
Item# 42322
Summit Gold/Silver/Platinum B/B4 "main burner" ignitor kit. (DOES NOT INCLUDE SIDE/AUX BURNER COMPONENTS) Includes one spark box with 16-1/2" wire, one spark box with 9" wire, push button switch, 4-output spark generator with switch inputs, AA battery and assorted wires.
In Stock
$88.99
View
Add
Item# 10470
Manual push button style igniter kit for Weber Performer, "model years 2005-2012" (Touch-N-Go).  Includes double pole push button ignitor with mounting locknut, electrode with mounting bracket and molded in 24" long wire, electrode mounting screw, 24" long grounding wire and installation instructions.  Genuine Weber Part.
In Stock
Retail: $24.85
$23.49
View
Add
Item# 63788
Weber Q320/3200 electronic ignitor kit. Includes 2-pole spark generator, push button, collector box/electrode with offset mounting hole and battery. Genuine Weber Part.
In Stock
Retail: $43.99
$35.35
View
Add
Item# 42321
Complete "main burner" igniter kit for Summit Gold/Silver/Platinum A/A4, 4 burner grills. (DOES NOT INCLUDE SIDE/AUX BURNER COMPONENTS) Kit includes spark box/electrodes with wire lengths of 9" and 16", 2-output spark generator, push button, connecting wires, battery and mounting screws. Genuine Weber Part.
In Stock
Retail: $75.07
$67.49
View
Add
Item# 60092
Ignitor kit for Weber Q300/3000. Includes the sparkbox electrode wire assembly and the two pole spark generator push button.  Genuine Weber Part.
In Stock
Retail: $45.99
$28.25
View
Add
Item# 80004306
Electronic ignition kit for some Commercial Series models. Includes 2-pole electronic spark generator, side-burner electrode, 4" main burner electrode with wire, and 38" connecting wire.
In Stock
$27.29
View
Add
Item# 40826404
Manual push button style igniter kit for Weber Performer, "model years 2004 and older" (Touch-N-Go).  Includes double pole push button ignitor with mounting locknut, electrode with mounting bracket and molded in 13" long wire, electrode mounting screw, 13" long grounding wire and installation instructions.  Genuine Weber Part.
In Stock
Retail: $26.10
$23.45
View
Add
Item# 80462
This newer style ignitor kit is the exact replacement for current models, Q1000/2000 and retrofits to the older Weber Q100/200. Features a tented ceramic electrode to better help protect the ignitor electrode from food drippings and a 2-Pole Snap-In fit piezo style push button spart generator. Installation instructions included.  Genuine Weber Part.
In Stock
Retail: $23.99
$21.80
View
Add
Item# 4500208K
Includes the twist and lock collector box, electrode, mounting screw and connector wire. Used on 1999 and newer Masterflame burners. Instructions
In Stock
$9.59
View
Add
Item# 80000653
Kit includes a 2-pole "AA" electronic spark generator (where there are two wire connections on the back side), spark box with electrode and additional hookup wire. Battery not included.
In Stock
$14.59
View
Add
Item# DPP19
"Rotary" ignitor kit. Fits "P" Series, "D" Series prior to 2000. Includes "rotary" spark generator, knob, grounding wire, gas collector box electrode assembly with molded in 15" long wire, hardware and installation instructions.  Genuine Broilmaster Part.
In Stock
Retail: $42.00
$37.80
View
Add
Item# DPP20
"Electronic" ignitor kit. Fits "P" Series, "D" Series 2000-01. Includes "electronic" spark generator with push button cap, wires, gas collector box electrode assembly with molded in 15" long wire, hardware and installation instructions.  Genuine Broilmaster Part.
In Stock
Retail: $46.00
$41.40
View
Add
Item# GGRIC
Rotary ignitor kit. Includes one "single output" rotary spark generator, knob, collector box, screws and wire.
In Stock
Retail: $37.55
$22.39
View
Add
Item# 905
Igniter kit for Weber Genesis Silver/Gold/Platinum "C" (with side burner) model years 2004 to 2006. Features a "3" output terminal push button, 2 for the main burners and 1 for the side burner. Kit includes 1 "snap in place" 3 terminal push button igniter, main burner electrode/collector box with wires, 2 side burner wires, 1 side burner spade terminal clip with self tapping mounting screw and installation instructions.  Genuine Weber Part.
SOLD OUT: Expected In Stock 12/6/2024
Retail: $48.99
$28.60
View
Item# 65737
Electronic ignitor kit, Weber Performer "model years 2013 and newer".  Includes 2 output "AAA" ignition module, electrode with mounting bracket and 24" wire attached, 24" grounding wire, push button cap with module mounting lock ring, electrode mounting screw, one "AAA" battery and installation instructions. Genuine Weber Part.
In Stock
Retail: $35.99
$29.17
View
Add
Item# 42454
Ignitor kit with all components as shown for Summit Silver/Gold/Platinum D4 models. (DOES NOT INCLUDE SIDE/AUX BURNER COMPONENTS) Includes electrode/spark boxes with wire lengths of 9", 10-1/2" and 16", 6-output spark generator with mounting screws, push button, connecting wires, battery and tie wraps. Genuine Weber Part.
In Stock
Retail: $118.15
$106.60
View
Add
Item# 7629
Complete main and sear burner igniter kit for Genesis 330 grills, model years "2011-2016" (control knobs on front face of the grill). Includes 4 output terminal "AA" electronic ignition module with push button switch/ battery cap, 1 sear burner electrode/collector box and 3 main burner electrode/collector boxes with color coded wires, wire clips with mounting washers and installation instructions. (NO SIDE BURNER COMPONENTS INCLUDED) Genuine Weber Part.
In Stock
Retail: $62.99
$52.99
View
Add
Item# 42325
Complete "main burner" ignitor kit with all components as shown for Summit Gold/Platinum B/B6 models. (DOES NOT INCLUDE SIDE/AUX BURNER COMPONENTS) Includes spark box/electrodes with wire lengths of 9", 16-1/2" and 25-1/2", 4-output spark generator, push button, connecting wires, battery, tie wraps and 2 mounting screws. Genuine Weber Part.
In Stock
Retail: $95.80
$84.75
View
Add
Item# 7628
Complete main burner igniter kit for Genesis 310/320  grills, model years" 2011-2016" (control knobs on front face of the grill). Includes 4 terminal "AA" electronic ignition module with push button switch/battery cap, 3 main burner electrode/collector boxes with color coded wires, wire clips with mounting washers and installation instructions. Genuine Weber Part.
In Stock
Retail: $62.99
$52.99
View
Add
Item# 7642

Genuine Weber Complete Electronic Ignition Rebuild Kit for Weber Spirit 210 and 310 Series with front mount controls, without a side burner, manufactured from 2013 to present.

Weber Electronic Ignition Complete Rebuild Kit for Spirit 210 and 310:

  • (1) Two output ignition module with battery cap
  • (1) AA Battery
  • (1) Main burner electrode and collector box with color coded wires
  • (1) Push button switch with wires
  • (1) Grounding wire
  • Mounting Hardware
  • Installation instructions.
  • Genuine Weber Part.

Completely rebuild your Weber Spirit Ignition/Lighting System with this all-in-one Genuine Weber kit from Grillparts.com. Let’s explain Why; You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules, wiring and buttons decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules and components have a finite lifespan. Replace your Weber Spirit grills ignition system with this complete kit and light your way to a better grilling experience!

What’s Included:

  • (1) Complete Electronic Ignition Rebuild Kit for Weber Spirit 210 and 310 grills
  • For models that do not have a Side Burner
  • Spirit Grills manufactured from 2013 and newer
In Stock
Retail: $63.99
$53.99
View
Add
Item# 80008194
"AA" Battery Electronic ignition kit for some Charbroil Commercial Series models. Includes 2-pole electronic spark generator with heat shield, main burner electrode with wire, side burner electrode, 38" wire and 2 mounting screws (Battery not included).
In Stock
$27.29
View
Add
Item# GGEIB-SET
MHP "AAA" electronic igniter kit for WNK, JNR and TJK models. Kit includes one single output "AAA" ignition module with push button cap, module mounting lock nut, electrode/collector box with hardware and one 12-1/4" wire with flat spade end connectors.  Battery not included.
In Stock
Retail: $57.15
$36.35
View
Add
Item# 64868
Electronic igniter kit for Weber Q1200 and Q2200, "model years 2014 and newer". Includes a "AAA" ignition module, white ceramic electrode with mounting bracket and wires, push button, "AAA" battery and installation instructions. Genuine Weber Part.
In Stock
Retail: $43.99
$35.88
View
Add
Item# 67726
Genesis 300-E and 300-S Series (2007 Models) complete ignitor kit. The distinctive part in this kit is the "metal" gas collector box and electrode.  This gas collector box/electrode mounts onto the wall of the fire box next to the front burner tube. Includes the 2-pole "AAA" spark generator, collector box with electrode, push button cap, wire retainer and battery.  Genuine Weber Part.
SOLD OUT: Expected In Stock 12/6/2024
Retail: $36.99
$34.20
View
Item# 67847
Genesis 300-E and 300-S Series (2008 thru 2010 models) ignitor kit. The distinctive part in this kit is the "white molded ceramic" gas collector box and electrode and wires.  This gas collector/electrode mounts directly onto the front burner tube.  Includes the 2-pole "AAA" spark generator, collector box/electrode, push button cap, wire retainer and battery.  Genuine Weber Part.
SOLD OUT: Expected In Stock 12/6/2024
Retail: $46.99
$29.68
View
Item# 7509

Genuine Weber® Push Button Ignitor Kit: Push Button (with lock-nut mounting), Wiring, Electrode and Collector Box Assembly for Weber Spirit (pre-2002), Weber Platinum I and II, Weber Genesis 1000 to 5500, Weber Genesis Silver and Gold (pre-2002).

Main burner Weber® Push Button Ignitor Kit contains a lock-nut style mount push button with double pole (2 wire connection terminals). Includes the gas collector box with electrode, and 14-1/2in. wiring. 

Push Button Ignitor Kit fits most the following Pre-2002 Weber Models:
Fits Weber Spirit (pre-2002), Weber Platinum I and II, Weber Genesis 1000 to 5500, Weber Genesis Silver and Weber Gold (pre-2002).

(NOTE: Push button has different appearance because of the newer lock-nut mounting vs. snap-in, and is now black in color).

  • (1) Genuine Weber Push Button Ignitor Kit with Button Assy, Wiring, Electrode and Gas Collector Box 
  • Instructions Included
  • Replacement push button igniter kit for Weber gas grills main burners on older grills
  • Genuine Weber OEM replacement part
In Stock
Retail: $21.99
$18.99
View
Add
Item# 7510
Main burner ignitor kit with "snap in" style mount push button. Kit includes double pole (2 wire connection terminals) push button, gas collector box with electrode and 14-1/2" long wires. For models after 2002. (Push button is different because of snap in feature and is red.)
In Stock
Retail: $21.99
$18.99
View
Add
Item# 42326
Complete "main burner" ignitor kit with all components as shown for Summit Gold/Platinum D/D6. (DOES NOT INCLUDE SIDE/AUX BURNER COMPONENTS) Includes spark boxes with wire lengths of 9", 10-1/2", 16" and 25-1/2", 6-output spark generator, push button, connecting wires, battery and tie wraps. Genuine Weber Part.
In Stock
Retail: $144.70
$130.75
View
Add
Item# 42323
Complete "main burner" ignitor kit with all components as shown for Summit Gold/Silver/Platinum C/4. (DOES NOT INCLUDE SIDE/AUX BURNER COMPONENTS) Includes spark boxes with wire lengths of 9", 10-1/2" and 16", 4-output spark generator, push button, connecting wires, battery and tie wraps.
In Stock
Retail: $94.29
$81.65
View
Add
Item# 80475
Electronic ignitor kit including spark box, push button, electronic spark generator and battery. The spark box has a straight mounting tab. (Will not fit newer Q1000 & Q2000 models after 2013 which have a side mounting hole.)
SOLD OUT: Expected In Stock 12/6/2024
Retail: $41.99
$34.20
View
Item# 91360

Complete Electronic Ignitor Kit for Weber® Spirit 200, Spirit 300 Series Models 2012 and Older. Includes a Two Output Electronic Ignition Module With Screw-On Push Button Battery Cap paired with gas Collector Box, Electrode and 18in. Wiring Assembly. Utilizes one AAA Battery (not included). Features an attached metal heat shield, module mounting jam nut/lock ring, and a gray screw-on style push button/battery cap with lightning bolt graphic. 

Why a new electronic ignition kit for your Weber Spirit 200/300? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your Weber Electronic Ignition Module, Electrode, Collector box and wiring with this awesome kit and light your way to a better grilling experience!

Fits Weber® Spirit 200 and Weber® Spirit 300 Series Models with Electronic Ignition manufactured in 2012 and prior years.

What’s Included:

  • (1) Push Button Start Electronic Ignition Module with 2 Outputs for 2012 and Older Spirit 200 and Spirit 300 models.
  • Attached metal heat shield
  • Module mounting jam nut/lock ring
  • Push button/battery cap with lightning bolt icon
  • (1)  Collector Box, Electrode and 18in. Wiring assembly
In Stock
Retail: $51.99
$29.55
View
Add
Item# 55710549
Rotary ignition kit for Charbroil Big Easy "Tru-Infrared" oil-less Roaster. Kit includes single output rotary igniter, electrode with white ceramic insulator and mounting bracket and 9-1/2" long wire with a round connector fitting (for the rotary igniter) on one end and a female flat spade fitting (for the electrode) on the other end.  Knob sold separately, see Part 29101909.  Mounting hardware included. Genuine Charbroil Part.
In Stock
$11.49
View
Add
Item# 67135
Complete "AA" igniter kit for Weber "Spirit II" 210 Series (2017 and newer). Kit includes, 2-ouput ignition module with 2-input terminals for ignition switch, push button switch with 33" long wires, electrode/collector box with 28" long wires, "AA" battery, mounting hardware and installation instructions. Genuine Weber Part.
In Stock
Retail: $54.21
$51.15
View
Add
Item# HOLLIGNKT
Complete manual "rotary" igniter kit. Fits many Holland grill models. Kit includes a single output rotary spark generator with control knob and a heavy duty dual tipped electrode with mounting tab and molded-in 13" long wire that terminates with a round connector end fitting (to connect to the rotary spark generator). The overall length of the electrode assembly is 4", which includes the 2" long white ceramic insulator. Quality Aftermarket Part.  Replaces OEM Part BHA3054.
In Stock
Retail: $56.60
$35.59
View
Add
Item# 80004346
2 output "AA" electronic igniter kit. Kit includes a 2 output "AA" electronic ignition module with push button/battery cap and spring, module mounting lock ring/jam nut, metal heat shield, electrode with 12" long wire, 90 degree bent electrode tip and 2-7/8" long white ceramic insulator with attached mounting bracket and 8" long grounding wire. Installation instructions and hardware included.
In Stock
$17.39
View
Add
Item# 55711124
Rotary ignition kit for Charbroil Big Easy Oil-Less Turkey Fryer. Kit includes single output rotary igniter, electrode with white ceramic insulator and mounting bracket and 15" long wire with a round connector fitting (for the rotary igniter) on one end and a female flat spade fitting (for the electrode) on the other end. Mounting hardware included. Knob sold separately, see part 29105279Fits model 17102065.  Genuine Charbroil Part.
In Stock
$11.29
View
Add
Item# 69851

Genuine Weber Complete Electronic Ignition Rebuild Kit for Weber Spirit 220 and 320 Series with front mount controls that feature a Side Burner, manufactured from 2013 to 2017. Replaces Weber Part 7643, which is no longer available.

Weber Electronic Ignition Complete Rebuild Kit for Spirit 220 and 320:

  • (1) Four output ignition module with battery cap
  • (1) AA Battery
  • (1) Main burner electrode with color coded wires,
  • (1) Side burner electrodes with color coded wires.
  • (1) Push button switch with wires
  • (1) Grounding wire
  • Mounting Hardware
  • Installation instructions.
  • Genuine Weber Part.

Completely rebuild your Weber Spirit Ignition/Lighting System with this all-in-one Genuine Weber kit from Grillparts.com. Let’s explain Why; You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules, wiring and buttons decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules and components have a finite lifespan. Replace your Weber Spirit grills ignition system with this complete kit and light your way to a better grilling experience!

What’s Included:

  • (1) Complete Electronic Ignition Rebuild Kit for Weber Spirit 220 and 320 grills
  • For models with a Side Burner
  • Weber Spirit Grills manufactured from 2013-2017
In Stock
$45.15
View
Add
Item# 66353
Complete ignition kit for Weber Genesis "II" 210 models (2017 and newer). Includes a "AA" two output ignition module with color coded wire terminals and mounting screws, remote push button switch, 2 main burner electrodes with white ceramic insulator/collector boxes and color coded molded-in wires in lengths of 23" and 36", a 42" long dual wire harness for the push button switch to module connection, "AA" battery and wire clips. Installation instructions included. Genuine Weber Part.
In Stock
Retail: $79.78
$77.99
View
Add
Item# 67053
Complete "AA" igniter kit for Weber "Spirit II" 310 Series (2017 and newer). Kit includes, 2-ouput ignition module with 2-input terminals for ignition switch, push button switch with 36" long wires, electrode/collector box with 32" long wires, "AA" battery, mounting hardware and installation instructions. Genuine Weber Part.
In Stock
Retail: $55.59
$52.25
View
Add
Item# 66354
Complete ignition kit for Weber Genesis "II" 310 models (2017 and newer). Includes a "AA" four output ignition module with color coded wire terminals and mounting screws, remote push button switch, 3 main burner electrodes with white ceramic insulator/collector boxes and color coded molded-in wires in lengths of 27"/36"/46", a 49" long dual wire harness for the push button switch to module connection, 28" long grounding wire, "AA" battery and wire clips. Installation instructions included. Genuine Weber Part.
In Stock
Retail: $106.99
$92.76
View
Add
Item# 66356
Complete ignition kit for Weber Genesis "II" 610 models (2017 and newer). Includes a "AA" six output ignition module with color coded wire terminals and mounting screws, remote push button switch, 6 main burner electrodes with white ceramic insulator/collector boxes and color coded molded-in wires in lengths of 27"/32"/36"/46"/51"/59", a 64" long dual wire harness for the push button switch to module connection, "AA" battery and wire clips. Installation instructions included. Genuine Weber Part.
In Stock
Retail: $144.87
$136.25
View
Add
Item# 66355
Complete ignition kit for Weber Genesis "II" 410 models (2017 and newer). Includes a "AA" four output ignition module with color coded wire terminals and mounting screws, remote push button switch, 4 main burner electrodes with white ceramic insulator/collector boxes and color coded molded-in wires in lengths of 27"/36"/46"/51", a 56" long dual wire harness for the push button switch to module connection, "AA" battery and wire clips. Installation instructions included. Genuine Weber Part.
In Stock
Retail: $107.50
$104.05
View
Add
Item# 80006503
Electronic ignition kit includes electrodes, wire, push button cap and electronic spark generator component with two connections.
In Stock
$27.29
View
Add
Item# 66504
Complete ignition kit for Weber Genesis II "LX" 340 (model years 2017 and newer). Includes a 4 output "AA" ignition module with battery cap, color coded output wire terminals, 2 input terminals for the igniter harness and mounting screws. Also includes, assembled igniter harness with 3 rotary contact control valve switches and wire linkage, 3 main burner electrodes with white ceramic insulator/collector boxes and color coded molded-in wires in lengths of 27"/36"/46", a 28" long grounding wire with mounting screw,  battery and wire clips.  Installation instructions included. Genuine Weber Part.
In Stock
Retail: $90.99
$88.80
View
Add
Item# 66505
Complete ignition kit for Weber Genesis II "LX" 440 (model years 2017 and newer). Includes a 4 output "AA" ignition module with battery cap, color coded output wire terminals, 2 input terminals for the igniter harness and mounting screws. Also includes, assembled igniter harness with 4 rotary contact control valve switches and wire linkage, 4 main burner electrodes with white ceramic insulator/collector boxes and color coded molded-in wires in lengths of 27"/36"/46"/51", battery and wire clips. Installation instructions included. Genuine Weber Part.
In Stock
Retail: $103.99
$101.80
View
Add
Item# 66506
Complete ignition kit for Weber Genesis II "LX" 640 (model years 2017 and newer). Includes a 6 output "AA" ignition module with battery cap, color coded output wire terminals, 2 input terminals for the igniter harness and mounting screws. Also includes, assembled igniter harness with 6 rotary contact control valve switches and wire linkage, 6 main burner electrodes with white ceramic insulator/collector boxes and color coded molded-in wires in lengths of 27"/32"/36"/46"/51"/59", battery and wire clips. Installation instructions included. Genuine Weber Part.
In Stock
Retail: $140.99
$136.15
View
Add
Item# 66503
Complete ignition kit for Weber Genesis II "LX" 240 (model years 2017 and newer). Includes a 2 output "AA" ignition module with battery cap, color coded output wire terminals, 2 input terminals for the igniter harness and mounting screws. Also includes, assembled igniter harness with 2 rotary contact control valve switches and wire linkage, 2 main burner electrodes with white ceramic insulator/collector boxes and color coded molded-in wires in lengths of 23"/36", battery and wire clips. Genuine Weber Part.
In Stock
Retail: $69.61
$65.95
View
Add
Item# FMRSG2
"Two output" rotary spark generator with knob and mounting screws. Features 2 round post output terminals. This universal piezo style spark generator does not require a battery. Fits FireMagic "Pre-2001" Regal 1 and 2, Custom 1 and 2, Elite, Monarch and Deluxe models. Replaces FireMagic OEM Part 3199-23-1.
In Stock
Retail: $18.15
$12.15
View
Add
Item# 55710752
Manual piezo style igniter push button. Fits Charbroil Gill2Go Tru-Infrared (Model Years 2012 and Newer). Features red push button, mounting lock nut and single male spade wire terminal. Charbroil OEM Part.
In Stock
$11.49
View
Add
Item# 70401
"Snap-in" 2 pole manual push button igniter. Features two wire connection terminals, one "round" at bottom and one "flat spade" on the side. Mounts to grill with "Snap In" tabs. Fits Weber Q100/Q1000-Q200/2000 (main burner spark generator), Summit 400/600 Series 2007 and Newer (side burner spark generator) as well as many other brands/models. Genuine Weber Part.
SOLD OUT: Expected In Stock 12/6/2024
$7.79
View
Item# UP-6B
Two outlet "rotary" spark generator with knob and mounting screws. Features 2 round post output terminals. This piezo style spark generator does not require a battery.
In Stock
Retail: $18.15
$12.15
View
Add
Item# 5156113
"Snap-in" 2 pole pushbutton igniter. Features two wire connectors, one "round" at bottom and one "flat spade" on the side. Mounts to grill with "Snap In" tabs.
In Stock
$7.79
View
Add
Item# UP5B
Single pole(one output terminal), rotary spark generator with knob. Distance, center to center, between the mounting screw holes measures 1-3/8". Mounting hardware, 2 screws, included.
In Stock
Retail: $16.90
$11.90
View
Add
Item# GGK9
Replacement "knob" for manual "rotary" igniter/spark generators with "round" knob shaft. Measures 1-3/4" in diameter and features "molded in" directional arrow graphics.  IMPORTANT: This is the "knob" only.
In Stock
Retail: $4.55
$3.00
View
Add
Item# 4153713
Snap-In ignitor push button for units without side burners. (Single pole. Uses one wire.) Wire not included.
In Stock
$5.99
View
Add
Item# 4153714
Snap-in 2 pole pushbutton igniter, for units with side burners. Features two wire connectors, one "round" at bottom and one "flat spade" on the side. Mounts to grill with "Snap In" tabs.
In Stock
$7.79
View
Add
Item# UP8B
"Rotary" spark generator with three outlets. Includes knob and screws. Screw mounting holes are 1-3/8" center to center.
In Stock
Retail: $23.35
$15.99
View
Add
Item# UP7B

Piezo Ignition Push Button Spark Ignitor with Palnut (lock nut) threaded mounting. Universal part that fits an unbelievable assortment of gas grill brands and outdoor appliances. Plunger push button with double pole: flat side connector and round bottom connector.

What’s Included:
(1) Piezo Ignition Plunger Push Button Ignitor Spark Generator and Palnut Lock Nut.

In Stock
Retail: $8.50
$5.70
View
Add
Item# 67201
OEM Weber Part. Side mounting pushbutton spark generator with attached electrode for Weber "Go-Anywhere" portable models. Igniter assembly mounts through the side lighting hole for easy match free lighting. Replaces part 97667. Genuine Weber Part.
In Stock
$27.15
View
Add
Item# 55710881
Igniter push button switch with lock nut. Fits Charbroil Patio Bistro Tru-Infrared models. Includes two 17" long connecting wires with female spade connector ends. Charbroil OEM Part.
In Stock
$5.59
View
Add
Item# 40358001
Push button for Weber Q electronic ignition modules, "model years 2014 and newer". Fits Q1200/2200/3200 models. Black button features a chrome top with black spark emblem. Genuine Weber Part.
In Stock
Retail: $11.99
$10.99
View
Add
Item# 25070-93
Igniter push button switch.  Features chrome finish, weather seal "O" ring gasket and mounting lock ring nut..  Fits Broil King Baron and Regal/Imperial models with "tube in tube" burners and that utilize a remote ignition switch.  Genuine Broil King Part.
In Stock
$9.59
View
Add
Item# IGEIB9-KIT
"Screw-on" rubber push button for Weber "AA" battery sized electronic ignition modules. Gray button features lightning bolt screenprint design. "Fits Genesis 300 series model years 2011 thru 2016". Includes a module mounting lock ring and one "AA" battery. Replaces OEM Part 40277202.
In Stock
Retail: $46.10
$20.65
View
Add
Item# G432-0026-W1
Plastic battery cap with spring and soft push button top for "AAA" ignition modules. Diameter of the cap at its base is 1".
In Stock
$4.99
View
Add
Item# GGEIBPB
Push button battery cap for MHP "AAA" electronic ignition module. Features chrome finish with black rubber push button top. Base diameter is: 1-5/16" Includes module mounting lock ring nut.
In Stock
Retail: $7.15
$4.90
View
Add
Item# 69871
Igniter push button switch with wires, for Weber Spirit 200/300 series, model years 2013-Current. Features a soft rubber top push button switch with snap in place mounting tabs and two 23" long insulated wires with flat female spade connector ends.  Installation instructions included.  Genuine Weber Part.
In Stock
$23.36
View
Add
Item# FMIGPB
Push button for "AAA" ignition module. Features soft rubber push button top, chrome finish and module mounting lock ring. IMPORTANT: This push button only fits the newer style FireMagic modules, "2014 and newer". It is a "single piece" push button cap and will not fit onto the older style modules that require a "two piece" push button cap. Fits FireMagic Regal 1 and 2, Custom 1 and 2, Elite, Monarch and Deluxe models. Replaces FireMagic OEM Part 3199-49.
In Stock
$4.50
View
Add
Item# 55710874
Igniter push button switch with lock nut. Fits Charbroil "PORTABLE" Patio Bistro Tru-Infrared models. Includes two 21" long connecting wires with female spade connector ends. Charbroil OEM Part.
SOLD OUT: Expected In Stock 12/30/2024
$5.59
View
Item# G409-0030-W1
Push button battery cap with spring, for "AA" electronic ignition module. The cap features a soft rubber "push button" top. The diameter at the base of the cap measures 1-1/4".
In Stock
$4.99
View
Add
Item# G513-0021-W2
Chrome plastic battery cap with internal spring for "AA" ignition modules that have a remotely located push button switch.  This is a hard cap, intended to secure the "AA" battery inside of the ignition module only.  Measures 1-1/4" at the base.
In Stock
$4.99
View
Add
Item# 30158201

Weber Grills threaded screw-on gray rubber push button/battery cap for Electronic Ignition Modules that utilize a "AAA" battery. Gray rubber push button features printed lightning bolt icon.

This Weber Push Button Battery Cap has threads that screws onto the module. For the "Twist and Lock" type mounting version, see part# 81316.

What’s Included:

  • (1) Weber Push Button Battery Cap - Screw-on Type - for Weber Electronic Ignition Modules

Looking for a Push Button Battery Cap with Twist and Lock? See part# 81316.

In Stock
Retail: $7.59
$6.50
View
Add
Item# 81316

Weber Grills Twist and Lock mounting gray rubber push button/battery cap for Weber Electronic Ignition Modules that utilize a "AAA" battery. Gray rubber push button features printed lightning bolt icon.

This Weber Push Button Battery Cap has Twist and Lock for fixing the cap to the Ignition Module. For the Screw-On type mounting version, see part# 30158201.

What’s Included:

  • (1) Weber Push Button Battery Cap - Twist and Lock - for Weber Electronic Ignition Modules

Looking for a Push Button Battery Cap that has Screw On mounting? See part# 30158201.

In Stock
$5.92
View
Add
Item# 7001394
"Twist and lock" mounting style rubber push button/battery cap for "AAA" battery sized electronic ignition modules.
In Stock
$5.09
View
Add
Item# 30501046
"AA" Electronic ignition push button with spring. This button fits modules that require a AA battery. Button measures 1-1/4" in diameter and is 1-1/16" tall not including the spring.
In Stock
$4.59
View
Add
Item# G515-0017-W7
Charbroil Surefire ignition switch kit. Kit includes one flush mount igniter switch push button and three sets of different length wires to accommodate many different models. Two wires per set in lengths of 10", 18" and 26". Installation instructions included. Charbroil OEM part.
In Stock
$9.99
View
Add
Item# 3199-63
Igniter push button. Fits all Aurora, Echelon and Magnum Series, "model years 2009 and older". Features 2 male spade connection terminals and includes mounting hardware. Genuine Fire Magic Part.
In Stock
Retail: $40.00
$36.00
View
Add
Item# G515-0030-W1
Black plastic battery cap with internal spring, for "AA" ignition modules that have a remotely located push button switch. This is a hard cap, intended to secure the "AA" battery inside of the ignition module only. Measures 1-1/4" at the base.
In Stock
$4.99
View
Add
Item# 2181803
Red push button with spark design. Fits Weber Q 120, Q220 and Q320.
In Stock
$6.41
View
Add
Item# 24-B-46

Genuine AOG Push Button Igniter Switch for American Outdoor Grill (AOG) L-Series models manufactured in 2014 to present. Features snap-in mounting, a push-button top along with 2 male spade terminals on the back side for wiring.

Install a new AOG L-Series Igniter Switch to replace a cracked, broken or malfunctioning Push Button to get your grill started like new.

In Stock
Retail: $18.00
$16.20
View
Add
Item# 80004341
Push button battery cap, with spring, for "AA" electronic ignition module. The cap features a soft rubber "push button" top. The diameter at the base of the cap measures 1-1/4".
In Stock
$4.59
View
Add
Item# 66220
Igniter push button switch, for Weber Genesis "II" and Spirit "II" models (2017 and newer). Features soft rubber push button top with a chrome cap that has a "lightning bolt symbol", two male flat spade terminals for wire connections and two snap in place mounting tabs. Installation instructions included. 
In Stock
$18.99
View
Add
Item# SP13IS

High quality replacement Igniter Push Button Switch for Weber Spirit 200 and 300 series, model years 2013 and newer that feature electronic ignition. Features a soft rubber top push button switch with snap in place mounting tabs and two 23in. long insulated wires with flat female spade connector ends. Quality Aftermarket Part.  Replaces Weber Part 69871.

What’s Included:

  • (1) Igniter Push Button Switch for Weber Spirit 200 and 300 series:
  • Model Years 2013-Current
  • Soft rubber top push button
  • Snap in place mounting tabs
  • Two 23in. long insulated wires with flat female spade connector ends
  • Replaces Weber Part 69871
  • Installation instructions included. 
In Stock
$19.99
View
Add
Item# 42053
"AA" push button ignition switch for Weber Summit "Silver/Gold/Platinum" models. Features "Red" soft top push button/battery cap with battery spring, two male flat spade wire terminals and a mounting "lock nut ring".  Requires "AA" battery. (Battery not included!).  Genuine Weber Part.
In Stock
$11.99
View
Add
Item# IG18B
20" igniter wire. Features flat female spade connectors on both ends.
In Stock
Retail: $4.05
$2.85
View
Add
Item# 4153720
Ignitor wire with two round connectors. Measure 11 inches long. (NOTE: The terminal ends of the wire can be forced onto a flat spade, if needed.)
In Stock
Retail: $0.58
$3.39
View
Add
Item# 4153761
Patio Caddie igniter wire. Ignitor wire with two round connectors. Measure 11 inches long. (NOTE: The terminal ends of the wire can be forced onto a flat spade, if needed.)
In Stock
$3.39
View
Add
Item# 29102204
7-1/2" long electrode wire for Charbroil Patio Bistro, Tru-Infrared models. Wire has female spade fittings on each end and is designed to connect the burner ignition electrode to the ignition module. Charbroil OEM Part.
In Stock
$2.99
View
Add
Item# 3008-06
FireMagic main burner valve "push to light" igniter switch assembly. Includes the micro switch, 7" long dual wires with connector plug and two mounting screws. For use with Echelon and Aurora models that have the "Push To Light" feature, 2009 and newer. Genuine FireMagic Part.
In Stock
Retail: $36.00
$32.40
View
Add
Item# 29102807
Ground connector wire for Charbroil Grill2Go Tru-Infrared (model years 2012 and newer). Overall length of wire and end fittings is 5-3/8". Features small round end fitting for grounding screw and large round end fitting for the ignition push button connection.
In Stock
$5.09
View
Add
Item# IG43B

19in. long ignition wire with one end being a larger 1/4in. female spade terminal connector, and at the other end a smaller 1/8in. female flat spade terminal connector. Features clear plastic terminal protectors. Used for spark generator to electrode connections and electronic ignition module to push button switch connections.

Is your spark loosing juice? Check your ignition wires for any visible signs of damage. Look for fraying, cuts, or breaks in the wire insulation, or the wire itself. Check for any corrosion or rust on the connectors or terminals. Look for areas where the wire may have become worn along its path and is “shorting out” on the grill body or other component.  Test Continuity: Using a multimeter set to measure continuity or resistance. Touch one probe to each end of the wire, and if there's continuity, the multimeter should display a low resistance value (usually close to zero ohms). If there's no continuity or a high resistance value, it indicates a break in the wire.

Includes:

  • (1) 19in. long ignition wire with a 1/8in. female spade connector and a 1/4in. spade connector with terminal covers.

Fitment:

  • This wire fits Alfresco spark generator to electrode connections and DCS electronic ignition module to push button switch connections, but may also work for a variety of other Brands and Models.
  • Fits Viking Models: DVGBQ4103RT, DVGBQ4122RT, DVGBQ5304RT, DVGBQ5323RT, VGBQ4103RT, VGBQ1422RT, VGBQ5304RT, VGBQ532T, VGIQ410, VGIQ5323RT
In Stock
Retail: $12.85
$7.33
View
Add
Item# 25070-92
10-1/2" long dual wire harness, for making connection between the remote push button switch and the ignition module. Features small flat female spade fittings on one end of the wires (for connecting to the switch) and larger flat female spade fittings on the other ends (for connecting to the ignition module).  Fits Broil KIng Baron and Regal/Imperial models with "tube in tube" burners and utilize a remote ignition switch. Genuine Broil King Part.
In Stock
$2.45
View
Add
Item# IG7B

20in. Red Igniter Wire with one insulated female Spade terminal on one end, to one insulated female Round terminal on opposite end.

What’s Included:

  • (1) 20in. Igniter Wire for Weber Grills and Other Brands that require flat female spade to round female terminal connection points.
In Stock
Retail: $3.70
$2.79
View
Add
Item# 03610
47" Replacement wire with flat female spade connectors on each end. One end black shrink wrapped and the other with a square plastic protector.
In Stock
Retail: $10.20
$5.35
View
Add
Item# 03750
20" long igniter adapter wire. Features a "female flat spade" connector fitting on one end and a "male round"connector fitting on the other end.
In Stock
Retail: $5.54
$2.93
View
Add
Item# 04431
Main burner electrode with molded in 25" long wire that terminates with a flat female spade fitting. Features a 3-3/4" long white ceramic insulator with a 90 degree electrode tip and an in-line mounting tab with 2 screw holes. This electrode is designed to mount directly onto the main burner tube. Mounting hardware, 2 machine screws with nuts, included. Fits many Master Forge models as well as many other brands/models.
In Stock
Retail: $12.24
$6.12
View
Add
Item# 03197
Jumper wire for closing off unused terminals on battery powered electronic ignition modules. Measures 6" long, (including the connectors). Features flat spade connectors with plastic protectors on each end.
In Stock
Retail: $4.88
$2.81
View
Add
Item# 03198
Igniter adapter wire, converts flat female spade end fitting  to "round" end fitting.  Measures 2-3/4" long with female round connection on one end and a flat male spade connection on the other.  Perfect round end fit for rotary spark generators.
In Stock
Retail: $4.88
$2.81
View
Add
Item# 03751
Igniter adapter wire, converts round female end fitting to "flat" female spade end fitting. Measures 2-3/4" long with male round connector on one end and a flat female spade connector on the other.
In Stock
Retail: $3.61
$2.44
View
Add
Item# IG48
16" long grounding wire. Features a female spade terminal on one end (for connecting to an electronic ignition module) and a round flat grounding terminal on the other end.
In Stock
Retail: $6.00
$3.75
View
Add
Item# 67054
Two 36" long wires (dual wire harness) for igniter push button to igniter ignition module connection. Fits Weber "Spirit II" 310 Series (2017 and newer). Features 1/4" wide female flat spade connector ends. Genuine Weber Part.
In Stock
Retail: $25.19
$23.79
View
Add
Item# 67136
Two 33" long wires (dual wire harness) for igniter push button to igniter ignition module connection. Fits Weber "Spirit II" 210 Series (2017 and newer). Features 1/4" wide female flat spade connector ends. Genuine Weber Part.
In Stock
$21.99
View
Add