CharBroil Signature TRU-Infrared® Grill Parts

grill parts: Non-Locking 2-3/4" Caster (Replaces  G350-0024-W1)

Non-Locking 2-3/4" Caster (Replaces G350-0024-W1)

Item# G350-0024-W2
This part is in stock. IN STOCK
$9.99
Non-locking swivel caster with 2-3/4" wheel. Attaches by 7/16" stud end. Sturdy steel frame. (Replaces G350-0024-W1). Genuine Charbroil Part.

Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

  • Qty:
Item# G359-0009-W1
Stainless steel carry over tube for narrow 5/8" diameter burner. Tube channel measures 7-3/8" long (this measurement does not include the mounting tabs). Fits Charbroil Professional, Signature, Commercial, Performance Series Tru-Infrared and Signature Series "Conventional" "2 burner models", 2015 and newer.  Hardware, 2 cotter pins,included.  IMPORTANT: This carry over tube only fits Charbroils newer thin 5/8" diameter burner tubes.  Charbroil OEM Part.
In Stock
$3.59
View
Add
Item# G466-0015-W1
Stainless steel carry over tube for narrow 5/8' diameter burner tube. Tube channel measures 6" long. (this measurement does not include the mounting tabs). Fits Charbroil Professional, Signature, Commercial Series Tru-Infrared and Signature Series "Conventional" "3 and 4 burner models". Hardware, 2 cotter pins are included.  IMPORTANT: This carry over tube only fits Charbroils newer thin 5/8" diameter burner tubes.  Charbroil OEM Part.
In Stock
$3.99
View
Add
Item# G466-0047-W2
Burner rear support brace for 5/8" diameter main burner tubes, Charbroil Professional, Signature, Commercial and Performance Series "model years 2015 and Newer". (Tru-Infrared and Conventional)"L" shaped brace is 1-5/8" wide and features two mounting bolt holes and vertical burner mounting tab.  Designed to support Charbroil 5/8" diameter burner tubes.  Hardware, (2 ea.) bolts, nuts and washers, included.
In Stock
$4.99
View
Add
Item# G466-2500-W1
Charbroil newer generation, narrow 5/8" DIAMETER stainless steel main burner tube. Fits Charbroil, Professional, Signature, Commercial and Performance Series Tru-Infrared models (2015 and Newer).  Measures 14-3/4" long. Features a 90 degree bend and slotted mounting hole at the back end, carry over tube mounting stud screw and air mixture adjustment screw. Hardware, 2 cotter pins, included. Sold individually, more than one required.  Charbroil OEM Part.
In Stock
$10.29
View
Add
Item# G466-0024-W1
Stainless Steel heat tent. Fits Charbroil Professional, Signature and Commercial Series Tru-Infrared models, 2015 and newer. Measures 15-1/4" long and 1-7/8" wide, at the base. Features heat vent holes at each end. Sold individually, more than one required.
In Stock
$9.99
View
Add
Item# CG119PCI
Tru-Infrared "matte finish" cast iron cooking grate (top piece). Fits a variety of Charbroil Professional, Signature and Commercial Series Tru-Infrared "3 burner models", 2015 and newer. Measures 17" long X 7-5/8" wide. Designed to pair with emitter grate, part G466-2400-W1, sold separately. This is the cast iron top grate only. Sold individually, more than one required.  IMPORTANT: Please measure your old parts to assure fit. Quality Aftermarket Part, replaces parts G474-0017-W1, G466-0025-W1 and G466-0025-W1A (Note: Emitter grate is not included; it is shown for display purposes only.)
In Stock
$30.74
View
Add
Item# CG120PCI
Tru-Infrared "matte finish" cast iron cooking grate (top piece). Fits Charbroil Professional, Signature and Commercial Series Tru-Infrared "4 burner models", 2015 and newer. Measures 17" long X 9-1/2" wide. Designed to pair with emitter grate, part G533-2200-W1, sold separately. This is the cast iron top grate only. IMPORTANT:Please measure your old parts to assure fit. Sold individually, more than one required. Quality Aftermarket  Part, replaces parts G533-0009-W1 and G533-0009-W1A. (Note: Emitter grate is not included; it is shown for display purposes only.)
In Stock
$34.71
View
Add
Item# G369-0030-W1
Tru-Infrared cast iron cooking grate (top piece). Fits Charbroil Professional, Signature and Commercial Series Tru-Infrared "2 burner models", 2015 and newer. Measures 17" long X 8-3/4" wide. Designed to pair with emitter grate, part G362-2100-W1, sold separately. This is the cast iron top grate only. Sold individually, more than one required. IMPORTANT: Please measure your old parts to assure fit. Charbroil OEM part. (Note: Emitter grate is not included; it is shown for display purposes only.) Replaces parts G362-0008-W1 and G362-0008-W1A.
In Stock
$31.75
View
Add
Item# G362-2100-W1
Tru-Infrared stainless steel "Emitter Grate" (cooking grate bottom perforated piece). Fits a variety of Charbroil Professional, Signature and Commercial Series Tru-Infrared "2 burner models", 2015 and newer.  Measures 17-1/8" long X 9-3/8" wide.  Designed to pair with cast iron cooking grate top, part G369-0030-W1(sold separately).  IMPORTANT: Please measure your old parts to assure fit.  This is the emitter grate only.  Sold individually, more than one required.  Charbroil OEM Part.
SOLD OUT: Expected In Stock 12/30/2024
$20.41
View
Item# G466-2400-W1
Tru-Infrared stainless steel "Emitter Grate" (cooking grate bottom perforated piece). Fits a variety of Charbroil Professional, Signature and Commercial Series Tru-Infrared "3 burner models", 2015 and newer.  Measures 17-1/8" long X 8-1/8" wide.  Designed to pair with cast iron cooking grate top, part CG119PCI (sold separately).  This is the emitter grate only. IMPORTANT: Please measure your old parts to assure fit. Sold individually, more than one required.  Charbroil OEM Part.
In Stock
$25.43
View
Add
Item# G533-2200-W1
Tru-Infrared stainless steel "Emitter Grate" (cooking grate bottom perforated piece). Fits a variety of Charbroil Professional, Signature and Commercial Series Tru-Infrared "4 burner models", 2015 and newer.  Measures 17-1/4" long X 10-1/8" wide. Designed to pair with cast iron cooking grate top, part CG120PCI (sold separately). This is the emitter grate only. IMPORTANT: Please measure your old parts to assure fit. Sold individually, more than one required. Charbroil OEM Part.
In Stock
$26.68
View
Add
Item# G350-0024-W2
Non-locking swivel caster with 2-3/4" wheel. Attaches by 7/16" stud end. Sturdy steel frame. (Replaces G350-0024-W1). Genuine Charbroil Part.
In Stock
$9.99
View
Add
Item# G356-0027-W1
Bezel for gas control knob. Measures 3-1/8" in diameter and features "High to Low" graphics. Fits Charbroil Advantage and Signature Series "Conventional" 2 burner models (2015-Newer) and Professional, Commercial and Performance Series "Tru-Infrared" models. Mounting hardware, 2 screws and lock washers, included.
In Stock
$2.99
View
Add
Item# G408-0036-W1
Caster socket insert for rectangular steel tube legs. Surface dimension where the caster screws in is 1" X 2". Insert is 2-1/16" top to bottom. Accepts 7/16" threaded caster.
In Stock
$3.99
View
Add
Item# G466-0026-W1
Locking ball bearing swivel caster with 2-7/8" diameter wheel. Features On/Off foot lever for locking caster wheel. Sturdy steel frame construction. Attaches to leg frame with heavy gauge steel box flange. Fits a variety of Charbroil Professional, Signature, Commercial Series "Tru-Infrared" and Signature "Conventional" Series models (2015 and Newer).  Genuine Charbroil Part.
In Stock
$10.99
View
Add
Item# G466-0027-W1
Non-locking ball bearing swivel caster with 2-7/8" diameter wheel. Sturdy steel frame construction. Attaches to leg frame with heavy gauge steel box flange.  Fits a variety of Charbroil Professional, Signature, Commercial Series "Tru-Infrared" and Signature Series "Conventional" models (2015 and Newer).  Genuine Charbroil Part.
In Stock
$10.29
View
Add
Item# G466-2200-W1
Black plastic gas control knob for Charbroil Professional, Commercial, Signature, Performance Series "Tru-Infrared" and Signature Series "Conventional" models (2015 and Newer). Measures 2" in diameter and fits standard 1/4" "D" shaped valve stem. Features chrome top with Charbroil logo in black.
In Stock
$4.99
View
Add
Item# G515-0082-W1
Locking swivel caster with 2-3/4" wheel. Features On/Off foot lever for locking caster wheel. Sturdy steel frame. Attaches by 7/16" stud end.
In Stock
$6.99
View
Add
Item# 100700-168

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

  • (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.
In Stock
$76.99
View
Add
Item# 104007

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Female threaded (3/8in. FNPT) end fits onto 3/8in. fixed supply line.

What’s Included:

  • 1 On/Off Ball Valve Quick Connect Fitting
  • Includes Female threaded (3/8" FNPT) end fits onto 3/8" fixed supply line, Quick Connect coupler at other end.
In Stock
$32.99
View
Add
Item# 104406

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 3/8" Gas Line Quick Connect Fitting
In Stock
$23.34
View
Add
Item# 106238-30

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

  • 2-Stage Regulator and 30in. Hose Assembly which includes:
  • 3/8in. ID high pressure hose, 30in. length.
  • 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
  • One 3/8in. to 3/4in. brass adapter included.  
In Stock
$49.99
View
Add
Item# 3090

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

  • This timer accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
  • Installation/operating instructions.
In Stock
Retail: $102.00
$91.80
View
Add
Item# 3090-01

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

  • 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.
In Stock
Retail: $20.00
$18.00
View
Add
Item# 3092

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

  • Accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer Assembly, 20/40/60min. durations. 
  • Installation/operating instructions.
In Stock
Retail: $102.00
$91.80
View
Add
Item# 3092-01

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

  • 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.
In Stock
Retail: $26.00
$23.40
View
Add
Item# 5520-11T

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

  • 20/40/60 minute interval gas valve timer.
  • 100,000 BTU rating.
  • Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

  • Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
  • Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
  • Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
  • Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

  • Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
  • Installation and operating instructions.
  • Quality FireMagic Part.
In Stock
Retail: $247.00
$222.30
View
Add
Item# 5520-13T

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

  • 1-2-3 hour interval gas valve timer.
  • 100,000 BTU rating.
  • Natural Gas or Propane.

Mounting Panel Box:

  • Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
  • Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
  • Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
  • Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
  • Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

  • Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
  • Installation and operating instructions.
  • Quality FireMagic Part.
In Stock
Retail: $239.00
$215.10
View
Add
Item# 99281

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Genuine Weber Part. 
In Stock
Retail: $36.99
$34.95
View
Add
Item# HR5B

5/16in. ID propane/LP gas hose. 2 (dual) 22 inch length hoses with a brass 3/8in. female hex nut flare connectors, assembled to a single propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Created for gas grills requiring a second feed hose for a side burner, etc. 

Are your gas lines cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) Dual Hose Regulator Assy, with (2) 5/16in. x 22in. hoses with single attached regulator with integrated QCC1 to-tank connection.
  • Instruction sheet.
In Stock
$39.39
View
Add
Item# HR7B

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower price point than Weber #99281.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Quality aftermarket part.
In Stock
Retail: $43.20
$28.86
View
Add
Item# NG10

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 10ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $82.99
$54.04
View
Add
Item# NG12

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 12ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $86.99
$60.94
View
Add
Item# NG14

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 14ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $93.99
$65.84
View
Add
Item# PR-SU

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

  • Convertable to/from Natural Gas to/from Propane Gas Regulator
  • 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
  • Rated 1/2 PSIG.  
In Stock
$20.59
View
Add
Item# RGB

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

In Stock
$7.93
View
Add
Item# G350-0017-W1
2 output "AA" electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the ignition switch and 2 output terminals for the electrodes.  IMPORTANT: This module requires a remote ignition switch, see part G515-0017-W7, sold separately.  Genuine Charbroil Part.
In Stock
$13.69
View
Add
Item# G466-0057-W1
Electrode (for narrow 5/8" diameter burner tube) with 20" long wire for Charbroil Professional, Signature, Commercial Series "Tru-Infrared" 3 and 4 burner models and Advantage/Signature Series "Conventional" 2, 3 and 4 burner models, "2015 and newer".  Features gas collector box/electrode with burner mounting spring clamp and a 3" white ceramic electrode insulator with a 20" long molded in wire. The wire terminates with a female spade fitting.  IMPORTANT: This electrode only fits Charbroils newer thin 5/8" diameter burner tubes.
In Stock
$4.99
View
Add
Item# G511-0055-W1
4 output "AA" electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the ignition switch and 4 output terminals for the electrodes. IMPORTANT: This module requires a remote ignition switch, see part G515-0017-W7, sold separately. Genuine Charbroil Part.
In Stock
$18.69
View
Add
Item# G515-0017-W7
Charbroil Surefire ignition switch kit. Kit includes one flush mount igniter switch push button and three sets of different length wires to accommodate many different models. Two wires per set in lengths of 10", 18" and 26". Installation instructions included. Charbroil OEM part.
In Stock
$9.99
View
Add
Item# G515-0030-W1
Black plastic battery cap with internal spring, for "AA" ignition modules that have a remotely located push button switch. This is a hard cap, intended to secure the "AA" battery inside of the ignition module only. Measures 1-1/4" at the base.
In Stock
$4.99
View
Add
Item# G515-0030-W2
5 output "AA"  electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the remote ignition switch and 5 output terminals for the electrodes.  IMPORTANT: This module requires a remote ignition switch, see part G515-0017-W7, sold separately.  Genuine Charbroil Part.
In Stock
$17.99
View
Add
Item# G416-0015-W1
7-3/4" X 4" grease pan for Charbroil Professional, Signature, Commercial Series "Tru-Infrared models" (2015-Newer), Advantage Series "Conventional" 6 burner, Signature Series "Conventional" (model years 2015-Newer) and a variety of Commercial Series conventional models.   Features a curled lip handle and 5-3/4" long side lip edges, for tray rail supports. Measures 7-3/4" long (including the handle) X 4" wide (including the lip edges).  Genuine Charbroil Part.
In Stock
$9.99
View
Add
Item# G466-0003-W1
Round temperature gauge with 1-3/8" long temp probe. Fits Charbroil Professional, Signature, Commercial Series "Tru-Infrared" and Signature Series "Conventional" models, 2015 and newer.  Dial face measures 2-3/8" in diameter and has a temperature range of 150 to 650 degrees. Mounting wing nut included.  Genuine Charbroil Part.
In Stock
$9.19
View
Add
Item# G466-0034-W1
Grease tray support rail for Charbroil Professional, Signature and Commercial Series Tru-Infrared models. "L" shaped rail measures 5-7/8" long.  Supports tray part,G416-0015-W1, sold separately.   Sold individually, more than one required.
In Stock
$3.59
View
Add