Stainless steel carryover tube. Tube channel measures 4-1/2" long. (this measurement does not include the mounting tabs). Comes with 2 cotter pins.  Designed to fit Charbroil 1" diameter burner tube.

Stainless steel carryover tube. Tube channel measures 6-5/8" long. (This measurement does not include the mounting tabs). Includes 2 cotter pins.  Designed to fit Charbroil 1" diameter burner tube.

15-7/8" long X 1" diameter stainless steel tube burner. Features indentations for clamp-on style igniter. The mounting flange end has a short 90 degree bend with a centered "slotted" mounting hole. Crossover stud screw located at back...

Stainless steel carryover tube. Tube channel measures 5-1/2" long. (this measurement does not include the mounting tabs). Comes with 2 cotter pins.  Designed to fit Charbroil 1" diameter burner tube.

16" long X 3-3/4" wide porcelain coated steel flame tamer. Features two raised mounting tabs at each end. Replaces older part numbers G501-0008-W1, 80006357 and 80003332. Genuine Charbroil Part.

Two section stainless steel cooking grate and emitter tray set. Includes 2 grates that measure 17" long X 8-1/2" wide (part ICG6613) and 2 emitter trays that measure 18-3/8" X 8-3/4" wide (part IET8898). Measurement of each section...

Three section stainless steel cooking grate and emitter tray set. Includes 3 grates(part ICG6613) and 3 trays(part IET8898). Measurement of each section with grate in tray is 18-3/8" front to back X 8-3/4" wide. Total set width is 26-1/4". Fits...

Four section stainless steel cooking grate and emitter tray set. Includes 4 grates that measure 17" long X 7-1/2" wide (part ICG2121) and 4 emitter trays that measure  18-3/8" long X 7-5/8" wide (part IET5532). Measurement...

Stamped stainless steel cooking grate set. Set includes 4 grate sections. Individual measurements of the sections are 7-3/4" wide X 18-3/8" front to back. Total width is 31".

Stamped stainless steel 2 piece "Infrared" cooking grate set. Includes 2 grate sections. Each section measures 8-3/4" wide X 18-3/8" front to back. Total set width is 17-1/2". These grates feature "slotted" grease drain...

Stamped stainless steel 3 piece "Infrared" cooking grate set. Includes 3 grate sections. Each section measures 8-3/4" wide X 18-3/8" front to back. Total set width is 26-1/4". These grates feature "slotted" grease drain...

Heavy duty 3 piece, matte finish cast iron cooking grate set. Each piece measures 18-1/8" front to back X 9 7/8" wide for a total set width of 29-5/8". Features side edge finger notches for easy installation and removal.

Heavy duty 2 piece, matte finish cast iron cook grate set. Each grate measures 18-5/16" front to back X 13-1/8" wide. Total measurement is 18-5/16" X 26-1/4".

Infrared cast iron cooking grate "top piece". Measures 7-1/8" wide X 18-1/4" front to back. This grate is designed to fit onto a matching emitter tray, part # CG113SS (sold separately). This is the cast iron grate only. More than one...

Infrared cast iron cooking grate "top piece". Measures 8-1/4" wide X 18-1/4" front to back. This grate is designed to fit onto a matching emitter tray, part # CG111SS (sold separately). This is the cast iron grate only. More than one...

Stamped stainless steel cooking grate. Measures 8-3/4" wide X 18-3/8" long. Features "slotted" grease drain holes for improved performance. Fits many 2 and 3 burner Charbroil Infrared models. More than one required. Also available in 2 and...

Infrared perforated stainless steel cooking grate. Measures 8-3/4" wide X 18-3/8" front to back. More than one required, sold individually. Original Charbroil Equipment.

Infrared perforated stainless steel cooking grate. Measures 7-3/4" wide X 18-3/8" front to back. More than one required, sold individually. Original Charbroil Equipment.

Stainless steel infrared cooking grate. Measures 17" front to back X 7-1/2" wide. This grate is designed to pair with a housing emitter tray, see part IET5532 (sold separately). This is the cooking grate only. Fits a variety of Charbroil...

Stainless steel Charbroil Tru-Infrared cooking grate. Measures 17" front to back X 8-1/2" wide. This grate is designed to pair with a housing emitter tray, see part # IET8898 (sold separately). This is the "cooking grate" only. Fits a...

Stainless steel Tru-Infrared emitter grate (cooking grate bottom perforated piece). Measures 18-3/8" front to back X 8-7/8" wide. This emitter grate is designed to pair with a cast iron cooking grate top piece, part #CG111PCI (sold separately). This...

Stainless steel Tru-Infrared emitter grate (cooking grate bottom perforated piece).  Measures 7-5/8" wide X 18-3/8" front to back. This emitter grate is designed to pair with a cast iron cooking grate top piece, part # 80021357 (sold...

Stainless steel Tru-Infrared cooking grate "emitter tray" (bottom perforated piece). Measures 18-3/8" front to back X 7-5/8" wide. Fits a variety of Charbroil Tru-Infrared "4" burner models, pre 2015. This housing tray is...

Stainless steel Tru-Infrared cooking grate "emitter tray" (bottom perforated piece). Measures 18-3/8" front to back X 8-3/4" wide. Fits a variety of Charbroil Tru-Infrared "2 and 3" burner models, pre 2015. This housing tray is...

Non-locking swivel caster with 2-3/4" wheel. Attaches by 7/16" stud end. Sturdy steel frame. (Replaces G350-0024-W1). Genuine Charbroil Part.

Control knob bezel with "Off/High/Low" graphics. Measures 3-1/8" in diameter. Features 2 elongated vertical and 2 large round horizontal mounting holes. Hardware included,2 screws and 2 lock washers. (Replaces parts, G354-0022-W1, G611-0073-W1...

Caster socket insert for rectangular steel tube legs. Surface dimension where the caster screws in is 1" X 2". Insert is 2-1/16" top to bottom. Accepts 7/16" threaded caster.

Main burner black plastic control knob with chrome top. Factory substitute for chrome knob with black plastic detail. Measures 2" in diameter.

Locking swivel caster with 2-3/4" wheel. Features On/Off foot lever for locking caster wheel. Sturdy steel frame. Attaches by 7/16" stud end.

Control knob bezel with infinite range graphics. Measures 3-1/8" in diameter. Features 2 elongated vertical (bottom hole cut horizontally) and 2 large round horizontal mounting holes. Hardware included (2 screws and 2 lock washers).  Replaces parts...

Black plastic gas control knob with chrome grip. Measures 2" in diameter. The knob mounting hole fits a 3/16" valve stem.

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length...

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of...

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP). Has...

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic...

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane...

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality...

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly. Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and...

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly. Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be...

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily...

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose. Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose...

2 output "AA" electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the ignition switch and 2 output terminals for the electrodes.  IMPORTANT: This module requires a remote ignition switch, see...

Electrode with wire and collector box for 1" DIAMETER main burner tube. Overall length (wire and electrode/collector box) is 39-1/4". Features "push-on" mounting clamp for easy installation and female spade connector on wire...

4 output "AA" electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the ignition switch and 4 output terminals for the electrodes. IMPORTANT: This module requires a remote ignition switch, see part...

Electrode with wire and collector box for 1" DIAMETER main burner tube. Overall length (wire and electrode/collector box) is 39-1/4". Features "push-on" mounting clamp for easy installation and female spade connector on wire...

Charbroil Surefire ignition switch kit. Kit includes one flush mount igniter switch push button and three sets of different length wires to accommodate many different models. Two wires per set in lengths of 10", 18" and 26". Installation...

Black plastic battery cap with internal spring, for "AA" ignition modules that have a remotely located push button switch. This is a hard cap, intended to secure the "AA" battery inside of the ignition module only. Measures 1-1/4" at...

5 output "AA"  electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the remote ignition switch and 5 output terminals for the electrodes.  IMPORTANT: This module requires a remote...

Rectangular slide out grease tray. Black powder coat finish. Pan measures 10-7/8" long X 5-3/4" wide, (measurement does not include handle).

Charbroil "top rounded" semi-circular temperature gauge. Measures 1-7/8" across bottom diameter. Features a 2-7/8" long rear temperature probe and a dial face range of 0-700 degrees.

Left and right side support rails for slide out grease tray. Each measures 19-1/4" long (measurement includes both mounting tabs).

Rectangular slide out grease catch pan. Gray powder coat finish. Pan measures 10-7/8" long X 5-3/4" wide, (Measurement does not include handle).