Fire Magic Grill Parts

Fire Magic Grill Parts
Fire Magic Gas Grill Parts

External appearance may vary between Grill Models

Fire Magic premium gas grill parts at discount warehouse pricing.

Low prices. Quick, same-day shipping. Order today!

Grillparts.com stocks top-quality exact-fit FireMagic Parts for Aurora, Echelon, Diamond, and Magnum grills for built-in and cart models.

Fire Magic grills deliver the ultimate in beauty and performance. Install new Fire Magic parts to ensure optimal performance, allowing you to create mouthwatering meals with ease. Refurbish your grill today and unlock a world of culinary possibilities with new grill parts from grillparts.com.

We’ve been shipping grill parts to backyard chefs since 1996. Keep your outdoor cooking experience as premium as your Fire Magic Grill by getting your luxury Fire Magic grill cooking like new.

Scroll down to view our parts listing for your FireMagic grill and order today.



Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

Item# 192-3049
Firemagic Infrared burner. Fits Aurora A790, A660, A530 models and Sear Stations. Infrared burner top measures 7-3/8" X 15-1/4".

 

  • Parts included
  • Infrared burner assembly with electrodes attached
  • Burner Cover
  • Flash tube
  • Electrode wire
  • One N/G and one L/P orifice
SOLD OUT: Expected In Stock 10/18/2024
Retail: $544.00
$489.60
View
Item# 192-3051
Firemagic Infrared burner. Fits Aurora models A540 and A430 only. Infrared burner top measures 7-1/4" X 12-1/2".
  • Parts included
  • Infrared burner assembly with electrodes attached
  • Burner Cover
  • Flash tube
  • Electrode wire
  • One N/G and one L/P orifice
SOLD OUT: Expected In Stock 10/18/2024
Retail: $527.00
$474.30
View
Item# 23201
Fire Magic cast iron bar burner. Overall end to end length is 19" X 1-1/2" wide across the top crown. Features tapered barrel-body with mounting end extension that has an offset mounting hole and a flared-bell venturi end. Fits FireMagic Elite, Monarch, Regal 2, Custom 2 and Deluxe Models.  Economical cast iron replacement for stainless steel OEM part 3041-40.
In Stock
Retail: $61.21
$33.75
View
Add
Item# 24177-05
Burner heat shield kit for FireMagic Echelon and Aurora models. Kit includes one stainless steel shield/diverter tube (measures 2-1/4" long X 2-1/2" wide) and one high temp silicone gasket. This shield kit is designed to protect the control panel from excessive heat.  Installation instructions included.  NOTE: This shield kit is not for use with infrared burners.  Genuine FireMagic Part.
In Stock
Retail: $34.00
$30.60
View
Add
Item# 3041-50
FireMagic 17-1/2" X 6" cast stainless "E" burner for Echelon, Aurora and Magnum grills.  Fits all A530, A660, A790, E660, E790, E1060, Elite Magnum, Monarch Magnum and Regal 2 Magnum models.  Features an air mixture adjustment shutter, 2 burner mounting pegs on the underside and 4 cast-in vaporizing panel support legs on the top side.  Includes heat shield diverter and silicone gasket. Genuine Firemagic Part.
In Stock
Retail: $386.00
$347.40
View
Add
Item# 3042-50
FireMagic 14-1/2" X 6" cast stainless "E" burner for Aurora A430 and A540 models only.  Features an air mixture adjustment shutter, 2 burner mounting pegs on the underside and 4 cast-in vaporizing panel support legs on the top side.   Genuine Firemagic Part.
In Stock
Retail: $360.00
$324.00
View
Add
Item# 3056A

Firemagic Infrared burner. Fits Echelon Series models. Infrared burner "top" measures 7-3/8" X 15-1/4".

Overall length is 18-1/4" (including the venturi tube).
  • Parts included
  • Infrared burner assembly
  • Burner Cover
  • Electrode with mounting bracket and molded-in 36" long dual wire harness
  • Adapter wire
  • One N/G and one L/P orifice
  • Replaces part 192-3050 and 192-3056
In Stock
Retail: $486.00
$437.40
View
Add
Item# CIF2
Fire Magic cast iron bar burner. Overall end to end length is 14-7/8" X 1-1/2" wide across the top crown. Features tapered barrel-body with flared-bell venturi end and mounting end extension with offset mounting hole. Fits Fire Magic Regal 1 and Custom 1 Models.  Economical cast iron replacement for stainless steel OEM part 3042-40. 
In Stock
Retail: $43.40
$27.57
View
Add
Item# 3056-S-2
Set of 2 FireMagic flavor grids. Each grid measures 16-1/4" front to back X 11-7/8" wide. This set fits all FireMagic Aurora A530 models. Genuine FireMagic Part.
In Stock
Retail: $242.00
$217.80
View
Add
Item# 3056-S-3
Set of 3 FireMagic stainless steel vented flavor grids. Two measure 16-1/4" front to back X 11-7/8" wide and one measures 16-1/4" front to back X 10-1/2" wide. This set fits all FireMagic Echelon 790, Aurora 790 and Monarch Magnum models. Genuine FireMagic Part.
In Stock
Retail: $363.00
$326.70
View
Add
Item# 3056-S-4
Set of 4 FireMagic stainless steel vented flavor grids. Two measure 16-1/4" front to back X 11-7/8" wide and two measures 16-1/4" front to back X 10-1/2" wide. This set fits all FireMagic Echelon E1060 and Elite Magnum models. Genuine FireMagic Part.
In Stock
Retail: $484.00
$435.60
View
Add
Item# 3057-S-3
Set of 3 FireMagic stainless steel vented flavor grids. Two measure 16-1/4" front to back X 9-7/8" wide and one measures 16-1/4" front to back X 8-1/2" wide. This set fits all FireMagic Echelon 660, Aurora 660 and Regal 2 Magnum models. Genuine FireMagic Part.
In Stock
Retail: $308.00
$277.20
View
Add
Item# 3063-S-2
Set of 2 FireMagic flavor grids. Each grid measures 13-1/4" front to back X 11-7/8" wide. This set fits all FireMagic Aurora and Choice 430/830 models. Genuine FireMagic Part.
In Stock
Retail: $167.00
$150.30
View
Add
Item# 3064-S-3
Set of 3 FireMagic stainless steel vented flavor grids. Two measure 13-1/4" front to back X 9-7/8" wide and one measures 13-1/4" front to back X 8-1/2" wide. This set fits all FireMagic Aurora and Choice 540 models. Genuine FireMagic Part.
In Stock
Retail: $242.00
$217.80
View
Add
Item# 90561
Firemagic stainless steel heat plate/flavor grid. Measures 16-3/16" front to back X 10-1/2" wide. Features a 3/4" square cut-out notch on front and back edges and screen style perforated venting for maximum air flow and heat distribution. Designed to set directly onto the 4 mounting legs of FireMagic cast stainless "E" burners. More than one required, sold individually.
In Stock
Retail: $96.82
$47.29
View
Add
Item# 90571
Firemagic stainless steel heat plate/flavor grid. Measures 16-3/16" front to back X 8-3/4" wide. Features a 3/4" square cut-out notch on front and back edges and screen style perforated venting for maximum air flow and heat distribution. Designed to set directly onto the 4 mounting legs of FireMagic cast stainless "E" burners. More than one required, sold individually.
In Stock
Retail: $83.88
$38.69
View
Add
Item# 90631
Firemagic stainless steel heat plate/flavor grid. Measures 13-3/16" front to back X 10-1/2" wide.  Features a 3/4" square cut-out notch on front and back edges and screen style perforated venting for maximum air flow and heat distribution.  More than one required, sold individually.
In Stock
Retail: $77.47
$39.77
View
Add
Item# 90641
Firemagic stainless steel heat plate/flavor grid. Measures 13-3/16" front to back X 8-3/4" wide. Features a 3/4" square cut-out notch on front and back edges and screen style perforated venting for maximum air flow and heat distribution. More than one required, sold individually.
In Stock
Retail: $74.88
$36.51
View
Add
Item# FMHP1
Firemagic stainless steel flavor grid heat plate with four 1-1/2" long support legs. Measures 7-7/16" wide X 13-3/4" front to back. This heat plate/flavor grid is designed to stand directly on top of cast iron or cast stainless burners. Features screen style perforated venting for optimal air flow and heat distribution.  This is the "center" grid and fits Firemagic Regal 1 and Custom 1 models.  Replaces FireMagic OEM Part 3054-S.
In Stock
Retail: $99.75
$59.99
View
Add
Item# FMHP2
Firemagic stainless steel flavor grid heat plate with four 1-1/2" long support legs. Measures 10-11/16" wide X 13-3/4" front to back. This heat plate/flavor grid is designed to stand directly on top of cast iron or cast stainless burners. Features screen style perforated venting for optimal air flow and heat distribution.  FIts Firemagic Regal 1 and Custom 1 models.  Replaces FireMagic OEM Part 3052-S.
In Stock
Retail: $99.75
$52.29
View
Add
Item# FMHP3
Firemagic stainless steel flavor grid heat plate with four 1-1/2" long support legs. Measures 7-7/16" wide X 17-3/4" front to back. This heat plate is designed to stand directly on top of cast iron or cast stainless burners. Features screen style perforated venting for optimal air flow and heat distribution.  This is the "center" grid for FireMagic Regal 2 models.  Replaces FireMagic OEM Part 3055-S.
In Stock
Retail: $99.75
$52.29
View
Add
Item# FMHP4
Firemagic stainless steel flavor grid heat plate with four 1-1/2" long support legs. Measures 10-11/16" wide X 17-3/4" front to back. This heat plate is designed to stand directly on top of cast iron or cast stainless burners. Features screen style perforated venting for optimal air flow and heat distribution.  Fits FireMagic Elite, Monarch, Regal 2, Custom 2 and Deluxe models.  Replaces FireMagic OEM Part 3053-S.
In Stock
Retail: $131.25
$65.45
View
Add
Item# 539S2
Stainless steel (1/4" sold rod) 2 piece cooking grate set. Each section measures 21-3/4" front to back X 11-7/8" wide, for a total set width of 23-3/4". Fits FireMagic and many other brands.
In Stock
Retail: $269.31
$117.09
View
Add
Item# CG88SS
15-3/4" X 11-1/4" Stainless Steel Rod Cooking Grate. Solid 1/4" stainless rod construction. Fits American Outdoor Grill (AOG) 24" and 36" models plus a variety of FireMagic, Charmglow and many other brands/models. IMPORTANT: Please Measure To Assure Fit.  More than one required, sold individually.
In Stock
Retail: $99.20
$52.95
View
Add
Item# 3008
FireMagic "push to light" main burner valve assembly for models 2009 and newer. This assembly includes the main burner valve with mounting saddle clamp and screws, micro switch with 7" long dual wires and connector plug. Note: This valve can also be used on FireMagic "non" push to light models (models with nickel plated ignition push button). Simply remove the micro switch, if not needed.  IMPORTANT: Orifice not included. Genuine FireMagic Part.
In Stock
Retail: $80.00
$72.00
View
Add
Item# 3008-06
FireMagic main burner valve "push to light" igniter switch assembly. Includes the micro switch, 7" long dual wires with connector plug and two mounting screws. For use with Echelon and Aurora models that have the "Push To Light" feature, 2009 and newer. Genuine FireMagic Part.
In Stock
Retail: $36.00
$32.40
View
Add
Item# 3008-07
FireMagic main burner "non"-push to light valve assembly. Fits older Echelon and Aurora models, Pre-2009. This assembly includes the main burner valve and mounting saddle clamp. IMPORTANT: Orifice not included. Genuine FireMagic Part.
In Stock
Retail: $64.00
$57.60
View
Add
Item# 3090

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

  • This timer accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
  • Installation/operating instructions.
In Stock
Retail: $102.00
$91.80
View
Add
Item# 3090-01

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

  • 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.
In Stock
Retail: $20.00
$18.00
View
Add
Item# 3092

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

  • Accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer Assembly, 20/40/60min. durations. 
  • Installation/operating instructions.
In Stock
Retail: $102.00
$91.80
View
Add
Item# 3092-01

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

  • 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.
In Stock
Retail: $26.00
$23.40
View
Add
Item# 35010
FireMagic main burner brass control valve. Features an adjustment screw, located at the bottom inside of the valve stem, that enables the valve to be used with either propane or natural gas. This valve does not come with an orifice.  Fits FireMagic Regal 1 and 2, Custom 1 and 2, Deluxe, Elite and Monarch models. IMPORTANT: Orifice "Not" Included.  Replaces FireMagic OEM Part 3004.
In Stock
Retail: $48.97
$25.59
View
Add
Item# 5520-11T

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

  • 20/40/60 minute interval gas valve timer.
  • 100,000 BTU rating.
  • Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

  • Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
  • Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
  • Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
  • Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

  • Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
  • Installation and operating instructions.
  • Quality FireMagic Part.
In Stock
Retail: $247.00
$222.30
View
Add
Item# 5520-13T

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

  • 1-2-3 hour interval gas valve timer.
  • 100,000 BTU rating.
  • Natural Gas or Propane.

Mounting Panel Box:

  • Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
  • Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
  • Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
  • Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
  • Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

  • Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
  • Installation and operating instructions.
  • Quality FireMagic Part.
In Stock
Retail: $239.00
$215.10
View
Add
Item# 01700
Black plastic control knob with graphics, for older FireMagic grills. Measures 2" in diameter.  Fits a variety of FireMagic models "Pre-2005".
In Stock
Retail: $12.24
$6.68
View
Add
Item# 24182-41
FireMagic "large" main rburner valve control knob with polished finish. Diameter measures 3". This metal knob features "Off/Light/High To Low" graphics etched into the perimeter and a comfort rubber grip. Fits FireMagic "Aurora and Echelon" Series with back lit controls only, 2010 and newer. Genuine FireMagic Part.
In Stock
Retail: $39.00
$35.10
View
Add
Item# 24182-42
FireMagic "small" backburner valve control knob with polished finish. Diameter measures 2-1/2". This metal knob features "Off/Light/High To Low" graphics etched into the perimeter and a comfort rubber grip. Fits FireMagic "Echelon" Series with back lit controls only, 2010 and newer. Genuine FireMagic Part.
In Stock
Retail: $34.00
$30.60
View
Add
Item# 24182-63
Large LED lighted disk for FireMagic Echelon Diamond models, 2014 and newer (with back lit controls). Mounts under the main burner control knob. Diameter of the disk measures 3-1/8". Includes 3-1/2" long insulated dual wire harness with connector ends. Genuine FireMagic Part.
In Stock
Retail: $63.00
$56.70
View
Add
Item# 24182-64
Small LED lighted disk for FireMagic Echelon Diamond models, 2014 and newer (with back lit controls). Mounts under the main burner control knob. Diameter of the disk measures 2-5/8". Includes 3-1/2" long insulated dual wire harness with connector ends. Genuine FireMagic Part.
In Stock
Retail: $63.00
$56.70
View
Add
Item# 3015

Genuine FireMagic 3in. Large Metal Gas/Heat Control Knob for the Main Burners on FireMagic and AOG Grills. This large, 3in. polished metal gas knob dial features “Off, Light, and High-to-Low" cast-in indicators that wont rub off, and black silicon twist grip to keep the knob cool to touch.

Light and twist your way to BBQ magic. Replace your broken, worn or lost FireMagic/AOG Control Knob with this exact genuine replacement knob from FireMagic Grills.

Fitment:

  • FireMagic Grills Gas Control Knob for 2007+ model years; fits many Elite, Monarch, Regal 2, Regal 1, Custom 2, Custom 1, Deluxe and Aurora models
  • FireMagic Grills Gas Control Knob for pre. 2011 model years; Echelon
  • AOG (American Outdoor Grills); FireMagic Grills Gas Control Knob fits AOG "L" and "T" Series BBQ gas grills.

What’s Included:

  • (1) 3in. Gas Control Knob for the main burners
  • Sold individually. (2) Required for 24in. Grills, (3) for 36in. Grills.
In Stock
Retail: $34.00
$30.60
View
Add
Item# 3016

Genuine FireMagic 2-1/2in. Metal Control Knob for the back/rear burners on FireMagic and AOG Grills. Polished metal gas knob dial features “Off, Light, and High-to-Low" cast-in indicators that wont rub off, and black silicon twist grip to keep the knob cool to touch.

Light and twist your way to BBQ magic. Replace your broken, worn or lost FireMagic/AOG Control Knob with this exact genuine replacement knob from FireMagic Grills.

Fitment:

  • FireMagic Grills Gas Control Knob for 2007+ model years; fits many Elite 50, Monarch, Regal 1, Regal 2, Custom 1, Custom 2, Aurora and Echelon grills. Does Not Fit Diamond Series.
  • AOG (American Outdoor Grills); FireMagic Grills Gas Control Knob fits AOG "L" and "T" Series BBQ gas grills.

What’s Included:

  • (1) 2-1/2in. Gas Control Knob for rear/back burners
In Stock
Retail: $29.00
$26.10
View
Add
Item# SDPF80-5
Black plastic control knob for main burner. Fits a variety of Phoenix and Firemagic models. Measures 2" in diameter and has a 3/8" opening for the valve knob stem. Features Off/Hi/Med/Lo graphics. Sold individually.
In Stock
Retail: $4.05
$3.49
View
Add
Item# 03198
Igniter adapter wire, converts flat female spade end fitting  to "round" end fitting.  Measures 2-3/4" long with female round connection on one end and a flat male spade connection on the other.  Perfect round end fit for rotary spark generators.
In Stock
Retail: $4.88
$2.81
View
Add
Item# 03199
FireMagic bracketed electrode kit for older (Pre-2006) models. Includes part 03198(adapter wire). Features dual electrodes in a 3" long stainless steel collector box with 26" wire ending in a female spade connector, one 20-1/2" grounding wire and mounting hardware (2 screws, 3 nuts and metal plate). Replaces FireMagic OEM electrode part 3199-15 and 3199-60.
In Stock
Retail: $48.97
$27.26
View
Add
Item# 3199-37
Stainless steel crossover ignition channel box with mounting bracket. The length of the channel box is 4-1/4" and the mounting bracket measures 5-1/8" long. The mounting bracket features a single mounting screw hole.  Installation instructions included.  Fits FireMagic Elite and Custom 2 models, pre 2007. More than one required, sold individually. Genuine FireMagic Part.
In Stock
Retail: $75.00
$67.50
View
Add
Item# 3199-44

Genuine AOG/FireMagic Four Port Output Ignition Module for American Outdoor Grill L-Series grills and FireMagic Aurora Models (Pre. 2015) and A53s, A43s that feature side burners/rotisserie back burners.

AOG/FireMagic 4-Output Port Output Spark Generator measures 3-1/2in. (including mounting tab). Features six male flat spade terminals, (4) output for electrodes and (2) inputs for the push button switch, and one 12in. grounding wire. Snap-in style mounting tabs.

Why a new AOG grill ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your AOG/Firemagic Four Port Output Ignition Module and light your way to a better grilling experience!

What’s Included:

  • (1) Genuine AOG/FireMagic 4-Output Port Spark Generator Ignition Module
In Stock
Retail: $63.00
$56.70
View
Add
Item# 3199-45
Main burner igniter electrode and collector box assembly. Includes the collector box (measures 1-3/4" long X 1" wide), spring loaded white ceramic insulated electrode with flat male spade terminal end, mounting nut, spacer, rubber connection protector and 23" wire with flat female spade connector ends.  Fits FireMagic Aurora and Choice models. Genuine FireMagic Part.
In Stock
Retail: $61.00
$54.90
View
Add
Item# 3199-46

Genuine AOG/FireMagic Six Output Port Ignition Module for American Outdoor Grill L-Series grills and FireMagic Aurora Models (Pre. 2015) that feature side burners/rotisserie back burners.

AOG/FireMagic 6-Output Port Output Spark Generator measures 4-5/8in. (including mounting tab). Features eight male flat spade terminals, (6) output for electrodes and (2) inputs for the push button switch, and one 12in. grounding wire. Snap-in style mounting tabs.

Why a new AOG grill ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your AOG/Firemagic Six Port Output Ignition Module and light your way to a better grilling experience!

What’s Included:

  • (1) Genuine AOG/FireMagic 6-Output Port Spark Generator Ignition Module
In Stock
Retail: $70.00
$63.00
View
Add
Item# 3199-61
Main burner igniter electrode and collector box assembly. Includes the collector box (measures 1-3/4" long X 1" wide) with attached mounting bracket, spring loaded white ceramic insulated electrode with flat male spade terminal end, mounting hardware, rubber connection protector, 33-1/2" wire with flat female spade connector ends, one "AAA" battery and installation instructions.  Fits FireMagic Elite, Regal 1 and 2, Custom 1 and 2, Monarch and Deluxe models.  Note: This electrode assembly can also be used in FireMagic Pre-2006 models that used part 3199-60.  Genuine FireMagic Part.
In Stock
Retail: $98.00
$88.20
View
Add
Item# 3199-63
Igniter push button. Fits all Aurora, Echelon and Magnum Series, "model years 2009 and older". Features 2 male spade connection terminals and includes mounting hardware. Genuine Fire Magic Part.
In Stock
Retail: $40.00
$36.00
View
Add
Item# 3199-64
Main and side burner electrode assembly for FireMagic Echelon models, Pre-2012. Includes 1-3/4" long white ceramic insulated electrode with mounting bracket and hardware (one bolt with nut), dual molded-in 8" wires that terminate in a male molex connector and a 3-1/2" long 2 wire pig-tail adapter to enable retro fit to two flat female spade connectors. Genuine FireMagic Part.
In Stock
Retail: $83.00
$74.70
View
Add
Item# 4199-69
Backburner electrode replacement kit (for model years 2000 and newer). Features an electrode with 90 degree bent tip, ground rod, white ceramic insulator, wire connection terminal, mounting bracket with necessary hardware and a 46" long connection wire with terminal connector ends and a ceramic pass through insulator with mounting bracket and screw. Installation instructions included. Genuine Fire Magic part.
In Stock
Retail: $105.00
$94.50
View
Add
Item# FMIGPB
Push button for "AAA" ignition module. Features soft rubber push button top, chrome finish and module mounting lock ring. IMPORTANT: This push button only fits the newer style FireMagic modules, "2014 and newer". It is a "single piece" push button cap and will not fit onto the older style modules that require a "two piece" push button cap. Fits FireMagic Regal 1 and 2, Custom 1 and 2, Elite, Monarch and Deluxe models. Replaces FireMagic OEM Part 3199-49.
In Stock
$4.50
View
Add
Item# FMRSG2
"Two output" rotary spark generator with knob and mounting screws. Features 2 round post output terminals. This universal piezo style spark generator does not require a battery. Fits FireMagic "Pre-2001" Regal 1 and 2, Custom 1 and 2, Elite, Monarch and Deluxe models. Replaces FireMagic OEM Part 3199-23-1.
In Stock
Retail: $18.15
$12.15
View
Add
Item# FMRSG3
"Three output" rotary spark generator with knob and mounting screws. Features 3 round post output terminals. This universal piezo style spark generator does not require a battery.
In Stock
Retail: $23.35
$15.99
View
Add
Item# FMSG2
Universal "2 output" electronic spark generator with push button cap.  Features 2 male spade output terminals on the back side, a soft rubber top push button with chrome finish bezel, module mounting lock ring and a clear epoxy encapsulated coil.  Requires a 3/4" or 13/16" mounting hole.  Uses one "AAA" battery, (not included).  Quality Aftermarket Part.  Fits FireMagic Regal 1 and 2, Custom 1 and 2, Elite, Monarch, Deluxe and all FireMagic Side/Power burners. Replaces FireMagic OEM Parts 3199-47 and 3199-32.
In Stock
$22.92
View
Add
Item# FMSG4
Universal "4 output" electronic spark generator with push button cap.  Features 4 male spade output terminals on the back side, a soft rubber top push button with chrome finish bezel, module mounting lock ring and dual clear epoxy encapsulated coils.  Requires a 3/4" or 13/16" mounting hole.  Uses one "AAA" battery, (not included). Quality Aftermarket Part.  Fits FireMagic Regal 1 and 2 and Custom 1 and 2 models with rotisserie back burners. Replaces FireMagic OEM Part 3199-48.
In Stock
Retail: $34.20
$20.92
View
Add
Item# IG18B
20" igniter wire. Features flat female spade connectors on both ends.
In Stock
Retail: $4.05
$2.85
View
Add
Item# IG7B

20in. Red Igniter Wire with one insulated female Spade terminal on one end, to one insulated female Round terminal on opposite end.

What’s Included:

  • (1) 20in. Igniter Wire for Weber Grills and Other Brands that require flat female spade to round female terminal connection points.
In Stock
Retail: $3.70
$2.79
View
Add
Item# 12V-10W Light Bulb

Replacement 12 Volt/10 Watt Halogen light bulb that fits the lamp assembly on all FireMagic Echelon and Aurora models, along with AOG (American Outdoor Grills) L-Series grills.

Replaces AOG/Firemagic OEM Part 24187-15.

In Stock
Retail: $7.65
$1.89
View
Add
Item# 23305

Genuine FireMagic/AOG 5-3/8in. x 3-5/8in. Analog Thermometer with Chrome Bezel. Features a dial face temperature range of 100-1000°F, 100-500°C. 5/16in. diameter temperature probe measures 2-3/8in. length. Includes two mounting stud bolts with nuts.

  • Fits FireMagic Echelon, Aurora and Choice gas grills 2013 and newer.
  • Fits American Outdoor Grill (AOG) models 2014 and newer. 
In Stock
Retail: $55.00
$49.50
View
Add
Item# 24182-46
FireMagic "lighted" master shut-off push button switch assembly. Fits Echelon Diamond models 2012-newer and Aurora models 2014-newer. Assembly includes the lighted push button switch with mounting lock nut ring and 4-1/2" long 4 wire harness with connector plug.  Installation instructions included. Genuine FireMagic Part.
In Stock
Retail: $139.00
$125.10
View
Add
Item# 24187-26

Genuine FireMagic/AOG (American Outdoor Grill) Rectangular Glass Light Lens for lamp assembly. Measures 3-1/8in. x 2-9/16in.

  • Fits all FireMagic Echelon/Aurora/Magnum models.
  • Fits American Outdoor Grill (AOG) L Series grills. 
  • Light bulb and lamp assembly are not included, see item #24187-28
  • Genuine FireMagic/AOG Part.
In Stock
Retail: $34.00
$30.60
View
Add
Item# 24187-28

Complete Lamp Assembly including the housing, bulb, lens and wire for all FireMagic Echelon and Aurora models, and AOG (American Outdoor Grill) models manufactured in 2014 and newer.

Complete lamp assembly includes:

  • Aluminum housing.
  • Glass lens.
  • 12V/10W Halogen bulb.
  • 41in. dual wires with connector end.
  • Genuine FireMagic/AOG Part.
In Stock
Retail: $70.00
$63.00
View
Add
Item# 100700-168

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

  • (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.
In Stock
$76.99
View
Add
Item# 104007

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Female threaded (3/8in. FNPT) end fits onto 3/8in. fixed supply line.

What’s Included:

  • 1 On/Off Ball Valve Quick Connect Fitting
  • Includes Female threaded (3/8" FNPT) end fits onto 3/8" fixed supply line, Quick Connect coupler at other end.
In Stock
$32.99
View
Add
Item# 104406

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 3/8" Gas Line Quick Connect Fitting
In Stock
$23.34
View
Add
Item# 106238-30

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

  • 2-Stage Regulator and 30in. Hose Assembly which includes:
  • 3/8in. ID high pressure hose, 30in. length.
  • 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
  • One 3/8in. to 3/4in. brass adapter included.  
In Stock
$49.99
View
Add
Item# 65941

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Replaces #7502 Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • 1 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Genuine Weber Part. 
In Stock
Retail: $35.29
$33.00
View
Add
Item# 99281

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Genuine Weber Part. 
In Stock
Retail: $36.99
$34.95
View
Add
Item# HR4B

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality aftermarket part at a cost effective price.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace your faulty regulator and hose with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly from Grillparts.com today!

What’s Included:

  • (1) 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Quality aftermarket part.
In Stock
Retail: $37.65
$28.20
View
Add
Item# HR5B

5/16in. ID propane/LP gas hose. 2 (dual) 22 inch length hoses with a brass 3/8in. female hex nut flare connectors, assembled to a single propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Created for gas grills requiring a second feed hose for a side burner, etc. 

Are your gas lines cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) Dual Hose Regulator Assy, with (2) 5/16in. x 22in. hoses with single attached regulator with integrated QCC1 to-tank connection.
  • Instruction sheet.
In Stock
Retail: $68.25
$39.38
View
Add
Item# HR7B

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower price point than Weber #99281.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Quality aftermarket part.
In Stock
Retail: $43.20
$28.86
View
Add
Item# NG10

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 10ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $82.99
$54.04
View
Add
Item# NG12

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 12ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $86.99
$60.94
View
Add
Item# NG14

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 14ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $93.99
$65.84
View
Add
Item# PR-SU

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

  • Convertable to/from Natural Gas to/from Propane Gas Regulator
  • 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
  • Rated 1/2 PSIG.  
In Stock
$20.59
View
Add
Item# RGB

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

In Stock
Retail: $11.35
$7.95
View
Add