Char-Broil Gas Grill
Parts Listing by Category

Page instructions: Click on any part description for photo, additional part detail and ordering.
Or, Click Here to find or determine your model and narrow the list.

1. Eleven Inch Ignitor Wire
   Ignitor wire with one round connector and one flat spade connector. Measure 11 inches long.
2. Diamond Shaped Burner
   Diamond shaped burner. Diamond measures 7-1/2" wide X 7" front to back. Total length front to back including the mounting tab and gas tube is 12-3/4".
3. Electric Patio Caddie Heating Element
   Heating element assembly for electric Patio Caddie models. 1650 Watts. 13 1/2" long, 9" wide.
4. Precision Flame 8000 Tube Burner and Shield
   Precision Flame tube burner. "U" Shaped burner, 29 1/4" inches total length from the top of the "U" to the tube ends. Set includes the drip VapoRISER® shield, burner support bracket with mounting hardware, and burner retainer stud with clip.
5. Precision Flame 7000 Tube Burner and Shield
   Precision Flame tube burner. "U" Shaped burner, 26-5/8" inches total length from the top of the "U" to the tube ends. Set includes the drip VapoRISER® shield, burner tube and mounting bracket. Width is 4 1/2".
6. Adjustable Precision Flame Burner
   Replacement burner system universal to 7000,8000,9000 Precision Flame Grills. Includes: Drip Vaporizer Bar, Burner, Briquet Plate, Ignitor, Hardware, and complete instructions.
7. "Big Easy" Dual (2-Burner) Assembly
   Dual burner assembly for Charbroil "Big Easy" models using two burners. Includes main burner with internal electrode and crossover burner which attaches between both burners.
8. "Big Easy" Triple (3-Burner) Assembly
   Fully assembled "Big Easy" three burner assembly. For units with three main burners. Includes the main burners and connecting flash tubes.
9. Masterflame 5000/6000 Series MF1 Bar Burner Assembly
   Top ported Masterflame 2-1/4" X 17" stainless burner assembly. Venturi tube spacing is 3" center to center and tube reach is 4-3/4". Fits 1998 and earlier 5000/6000 models.
10. Masterflame 5000/6000 Series MF2 Bar Burner Assembly
    Top ported Masterflame 2-1/4" X 17" stainless burner assembly. Venturi tube spacing is 2-3/8" center to center and tube reach is 4-3/4". Fits 1999 to present 5000/6000 models. Ships as shown which includes ignitor collector box and electrode.
11. Advantage and Performance Series Cast Iron Burner
    Cast iron paddle shaped burner. Measures approximately 3-1/2" wide by 13-3/4" total length including the gas tube. Fits Char-Broil Advantage and Performance Series grills. Exact substitute for stainless 7000083 burner. New improved porcelain coating.
12. 17-3/8" Advantage and Performance Series Burner Ignition Carryover Bracket
    Fits 360 series three-burner models. Measure to assure correct fit. The purpose of the bracket is to carry gas across and ignite the adjacent burners. Bracket length is 17-3/8". (Burners not included and shown for display only.)
13. 19-1/4" Advantage and Performance Series Burner Ignition Carryover Bracket
    Fits 480 series three-burner models. Measure to assure correct fit. The purpose of the bracket is to carry gas across and ignite the adjacent burners. Bracket length is 19-1/4". (Burners not included and shown for display only.)
14. 25-1/4" Advantage and Performance Series 4-Burner Ignition Carryover Bracket
    Fits 480 series four-burner models. Measure to assure correct fit. The purpose of the bracket is to carry gas across and ignite the adjacent burners. Bracket length is 25-1/4". (Burners not included and shown for display only.)
15. Masterflame 7000 Series MF2 Bar Burner Assembly
    Top ported Masterflame 2-1/4" X 17" stainless burner assembly. Venturi tube spacing is 2-3/8" center to center and tube reach is 7". Fits 1999 to present 7000 models. Ships as shown which includes ignitor collector box and electrode.
16. 15-3/4" Brass "Bar Burner" With Angled Top
    Commercial Series solid brass burner with an angled top. Burner dimensions are 15-3/4" long X 3" wide. The length measurement includes the bottom venturi tube length. The mounting pin clip is included.
17. Adjustable Burner Support Bracket With Carryover Tubes
    Porcelain coated burner bracket with stainless steel carryover tubes for the three burner grills. Adjusts 23-1/2" to 25". (Burner shown is not included but shown as an example) Fits burners up to 2-5/8" wide.
18. Front Avenue Burner Support Rail For Cast Iron Burners
    Burner support bracket for use with the cast iron burners. Stainless steel flash channels are mounted on stainless steel bracket. (Burner is not included and is shown for display purposes.) Bracket length 25". Used with 3-Burners.
19. Front Avenue Porcelain Coated Cast Iron Burner
    Front Avenue cast iron burner. Porcelain coated matte finish. Burner dimensions are 2-1/4" wide X 13-3/4" including the bottom side venturi tube length. Includes pin clip. Original equipment part.
20. Front Avenue Painted Finish Cast Iron Burner
    Front Avenue painted cast iron burner. Black Hi-Temp paint finish. Burner dimensions are 2-1/4" wide X 13-3/4" including the bottom side venturi tube length. Includes pin clip. After-market part.
21. Front Avenue Stainless Steel Tube Burner
    Front Avenue stainless steel tube burner. Burner length is 15-7/8".
22. Burner Flash Tube For Front Avenue Tube Burners
    The flash tube mounts between the burners to carry flame and ignition over to the adjacent burner. (Burners are not included and are shown for display purposes. Flash tube length is 4-3/4" not including screw tabs. Screws included.
23. Masterflame 8000/9000 Series MF1 Bar Burner Assembly
    Top ported Masterflame 3-5/8" X 22-1/4" stainless burner assembly. Venturi tubes are permanently mounted and tube spacing is 3" tube center to tube center. Fits 1998 and earlier 8000/9000 models.
24. Masterflame 8000/9000 Series MF2 Bar Burner Assembly
    Top ported Masterflame 3-5/8" X 22-1/4" stainless burner assembly. Venturi tubes are permanently mounted and tube spacing is 2-3/8" center to center. Fits 1999 to present 8000/9000 models.
25. 25-1/4" Burner Support Bracket For Round Oval Burners
    Commercial Series 2001 - 2002 burner support bracket. Stainless steel flash channels are mounted on bracket. (Burner is not included and is shown for display purposes.) Bracket length 25-1/4". Note that the ends of the bracket bend downwards.
26. 15-1/4" Brass "Round Oval" Burner
    Cast brass burner. Fits Commercial Series grills manufactured in 2002 - 2003. Replaces cast iron for longer durability. Burner length including venturi tube 15-1/4". Width 3-1/2". Product Note
27. 15-3/4" Cast Iron "Bar Burner" With Slight Angled Top
    Optional 15-3/4" angled top burner. Burner measures 15-3/4" long X 2-7/8" wide. Economically replaces cast brass 15-3/4" burner. Cast iron construction. Includes mounting clip.
28. Grill-2-Go Gas Regulator Control Assembly
    Control valve gas regulator assembly for the Thermos Grill-2-Go Model.
29. MF2 Series Hose, Valve and Regulator Assembly Without Sideburner Valve (1999 to current)
    Masterflame MF2 Hose, Valve and Regulator Assembly. Valve spacing 2-3/8" center to center. For 1999 and newer grill models without sideburner accessory.
30. 15-1/4" Cast Iron "Round Oval" Burner
    Cast iron burner. Porcelain coated flat finish. Fits Commercial Series grills manufactured in 2002 - 2003. Burner length including venturi tube 15-1/4". Width 3-1/2".
31. Aftermarket Replica Cooking Zone 1000 Burner and Drip Shield Kit
    (The original equipment burner is no longer available.) Includes burner shields which are permanently welded on the burner. Burner measures 26" x 7". Stainless steel. Please note that this burner will not accept ignitor components.

1. 5000/6000 Briquet Rack
   Rack which holds briquets for Charbroil 5000 and 6000 series models. This is the light gauge rack that mounts under the burner and holds the ceramic briquettes. Dimensions are 5-3/4 inches X 16 inches.
2. 7000/8000/9000 Briquet Rack
   Briquet holder for Charbroil 7000, 8000 and 9000 series models. This is the light gauge rack that mounts under the burner and holds the ceramic briquettes. Dimensions are 5-3/4" front to back X 20-1/4" wide.
3. Precision Flame Briquet Holder
   Briquet holder for all models utilizing the Precision Flame Cooking System. Holder measures 5 7/8 inches X 19 1/8 inches.

1. Big Easy Burner Tent Support
   Support assembly for the Big Easy burner tent. Holds the 6" X 6" burner tent over the burner. More than one required.
2. 5000 Series Narrow Burner Shield - Drip Vaporiser Bar
   Stainless steel tent shaped drip vaporiser bar, fits Masterflame 5000 Series gas grills. 19-1/4 inches long x 2-1/2 inches wide.
3. 7000 Series Burner Shield - Drip Vaporiser Bar
   Stainless steel tent shaped drip vaporiser bar, fits Masterflame 7000 Series gas grills. 23-1/2 inches long x 2-9/16 inches wide.
4. 26-1/4" 8000 Series Traditional Style Burner Shield Drip Vaporiser Bar
   Stainless steel tent shaped drip vaporiser bar, fits Masterflame 8000 Series gas grills. 26-1/4 inches long x 4 inches wide.
5. 6000 Series Burner Shield - Drip Vaporiser Bar
   Stainless steel tent shaped drip vaporiser bar, fits Masterflame 6000 Series gas grills. 21-1/2 inches long x 2-1/8 inches wide.
6. 9000 Series Burner Shield - Drip Vaporiser Bar
   Stainless steel tent shaped drip vaporiser bar. Fits Masterflame 9000 Series gas grills. 29-5/16 inches long x 4-1/4 inches wide.
7. Patio Caddie Burner Shield - Heat Distribution Plate
   Round cast iron circular plate which sets over the burner flame. Mounting hardware sold separately.
8. Big Easy Burner Tent
   Burner tent for Char-broil "Big Easy" model grills. Measures 6" X 6". Sold individually, more than one required.
9. 26-1/4" 8000 Series Modular Style Burner Shield Drip Vaporiser Bar
   Quickset 8000 Series vaporizer bar. 409 Stainless steel 20 guage. 26" X 6-1/2"
10. Advantage and Performance Series Stainless Steel Heat Tent
    Vented type burner tent drip vaporizer shield. Stainless steel construction. Dimensions are 5-3/4" wide by 11-3/4" long. Sold individually, more than one required. Fits Advantage and Performance Series grills.
11. Front Avenue 4-1/4" X 14-1/2" Flame Tamer
    Front Avenue burner shield or "Flame Tamer". Stainless steel. Measures 4-1/4" width X 14-1/2" front to back. For easier measurement we measure the width from edge to edge with the shield upside down.
12. Commercial Series Round Oval Burner "Flame Tamer"
    Factory substitute for original equipment heat tent. Original is no longer available and this sub is not an exact match in dimension. Measures 6-1/2" wide X 16-7/8" front to back. Porcelain enamel coated steel.
13. Front Avenue 4-1/2" X 16-1/4" Flame Tamer
    Front Avenue burner shield or "Flame Tamer". Stainless steel. Measures 4-1/2" width X 16-1/4" front to back. For easier measurement we measure the width from edge to edge with the shield upside down.
14. 3-3/4" X 16" Flame Tamer
    Burner shield or "Flame Tamer". Stainless steel. Measures 3-3/4" width X 16" front to back. For easier measurement we measure the width from edge to edge with the shield upside down.

1. 8000 Series Cast Iron Cooking Grate Set
   8000 Series raw (uncoated) cast iron cook grate set. 60/40 split, one section measuring 14-3/4" X 14-3/4" and the other 14-3/4" X 11-3/4". Coat with vegetable oil to season and seal grates before cooking.
2. 9000 Series Cast Iron Cooking Grate Set
   Charbroil 9000 Series cast iron cook grate set. 50/50 split, each section measuring 14 3/4" X 14 3/4". Molded to provide grilling on one side or flipped over for searing. Uncoated cast iron, use vegetable oil to season.
3. 16-3/4" X 24" Stainless Steel Clad Cooking Grate Set
   Cooking grate set features stainless steel clad iron rod. Each section measures 16-3/4" X 12" for a total measurement of 16-3/4" X 24".

1. 18" Grill Brush
   Long handled 18" grill brush keeps your hand away from hot cooking surfaces. Hardwood handle with wide cleaning head. Constructed of brass bristles which will not damage porcelain coated surfaces.
2. 6000 Series Porcelain Coated Cooking Grid
   Heavy duty porcelain coated cooking grid. One piece, dimensions 11-7/8" W X 22-1/8" L for 6000 Series Grills.
3. 7000 Series Porcelain Coated Cooking Grid
   Heavy duty porcelain coated cooking grid. One piece, dimensions 14" W X 24" L for 7000 Series Grills.
4. 5000 Series Porcelain Coated Cooking Grid
   Charbroil 5000 black porcelain coated cooking grid. Size 11 1/4" W X 19 1/2" L. Porcelain coated to reduce sticking and increase corrosion resistance.
5. 8000 Series Porcelain Coated Cooking Grid
   Heavy duty porcelain coated cooking grid. One piece, dimensions 14-3/4" W X 26-1/2" L for 8000 Series Grills.
6. 7000 Series Dual Warming Rack Set - Top and Bottom Tiers
   7000 Series Dual Warming Rack Set. Top tier surface dimensions are 8-1/2" X 20-3/4" and pivot rod length is 26". Bottom tier surface dimensions are 10-1/2" X 23-1/2" and pivot rod length is 27-1/8".
7. Patio Caddie Cooking Grate
   Porcelain coated Patio Caddie cooking grate. 15" Diameter.
8. 16-3/4" X 24" Porcelain Coated Rod Cooking Grate Set
   Heavy duty porcelain coated steel rod cooking grate set. Set contains two sections each measuring 16-3/4" front to back X 12" or a total measurement of 16-3/4" X 24".
9. 16-3/4" X 24" Stainless Steel Clad Cooking Grate Set
   Cooking grate set features stainless steel clad iron rod. Each section measures 16-3/4" X 12" for a total measurement of 16-3/4" X 24".
10. 18-5/8" X 32" Stainless Steel Cooking Grate Set
    Stainless steel three piece cooking grate set. Each section measures 18-5/8" X 10-3/8". The total combined cooking surface measures 18-5/8" X 32"
11. 18-1/2" X 26-1/4" Stainless Steel Rod Cooking Grate Set
    Heavy duty two piece stainless steel cook grid set. Constructed of 3/8" solid stainless steel rod. Each section measures 18-1/2" X 13-1/8" for a combined size of 18-1/2" X 26-1/4".

1. Big Easy Main Ignitor Wire
   Big Easy main ignitor wire. 15" long with round connector at wire end and flat connector at ceramic end.
2. Single Pole Snap-In Ignitor Push Button
   Snap-In ignitor push button for units without side burners. (Single pole. Uses one wire.) Wire not included.
3. Double Pole Snap-In Ignitor Push Button
   Snap-in 2 pole pushbutton for units with sideburners.Uses two wires. One connects at bottom with a round connector and the other at the side with a flat connector.
4. Eleven Inch Ignitor Wire
   Ignitor wire with one round connector and one flat spade connector. Measure 11 inches long.
5. Patio Caddie Ignitor Wire
   Patio Caddie Ignitor Wire. 7" long with shrink tube covered round connector on push-button end and shrink tube covered flat connector on ignitor end.
6. Patio Caddie Ignitor Electrode
   Patio Caddie Ignitor Electrode. Mounts directly through the Caddie bottom and the electrode tip strikes off of the heat distribution plate.
7. Button assembly for electronic module
   Rubber button assembly with chrome locking ring for electronic ignitor component.
8. Masterflame MF2 Ignitor Kit
   Includes the twist and lock collector box, electrode, mounting screw and connector wire. Used on 1999 and newer Masterflame burners. Instructions
9. Performance and Advantage Series Ignitor Electrode
   Ignition electrode with mounting nut. Electrode tip has double bend to align with burner porthole. Electrode extends into the grill 2" and the total length is 3-1/4".
10. Electronic Ignitor Replacement Kit
    Ignitor Replacement Kit. Includes Electric Spark Generator, Push button, Electrodes, and Wires.
11. 2-Pole Electronic Ignitor Kit
    Kit includes two-pole electronic spark generator, electrode with molded in wire, electrode cover and auxillary wire. Takes AA battery which is not included.
12. Front Avenue Electronic Ignition Kit
    Electronic ignition kit includes electrodes, wire, push button cap and electronic spark generator component with two connections.
13. 4 Port Electric Ignition Kit Commercial Series
    4 Port Electric Ignition Kit Commercial Series. Includes electronic spark generator, electrodes, wires, and miscellaneous.
14. Charbroil Commercial Series Ignitor Collector Box and Electrode
    Collector box and electrode assembly. Includes locking nuts and washer. Total component length is 4". Sold individually, more than one may be required.
15. Double Pole Rotary Spark Generator
    Rotary spark generator with knob and screws. Double pole generator uses two wires. Knob snaps and locks onto generator shaft.

1. Front Avenue Porcelain Coated Cast Iron Burner
   Front Avenue cast iron burner. Porcelain coated matte finish. Burner dimensions are 2-1/4" wide X 13-3/4" including the bottom side venturi tube length. Includes pin clip. Original equipment part.

1. Electric Patio Caddie Aluminum Top Insert
   Top aluminum insert for electric Patio Caddie models. Diameter is 15 1/2"
2. Electric Patio Caddie Aluminum Bottom Insert
   Bottom aluminum insert for electric Patio Caddie models. Diameter is 15 1/2".
3. "Grease Catcher" Hanger Wire and Cup
   Aluminum grease catcher cup which hangs under the grill to catch excess drippings. Includes hanger which threads through the drip hole in the bottom of the casting
4. "Fire and Ice" Model Grill-2-Go Oil Bottle Kit
   Oil Bottle kit for Grill 2 Go Fire and Ice model. Oil bottle is slightly wider than the standard bottle and measures 10-3/4" wide.
5. 13-3/4" Grill Bottom Clean Out Tray
   Anodized steel, slide out grill bottom tray. Measures 8-1/2" X 13-3/4". There are two tracks under the drain hole which hold the rectangular grease cup. (The grease cup is not included.)
6. 21-1/2" Grill Bottom Clean Out Tray
   Anodized steel, slide out grill bottom tray. Measures 8-1/2" X 21-1/2". There are two tracks under the drain hole which hold the rectangular grease cup. (The grease cup is not included.)
7. Rectangular Slide On Grease Catcher Cup
   The grease catcher cup slides onto the two tracks under the clean out pan. Cup measures 4" X 6" not including the handle. Black powder coated finish.
8. Grill-2-Go Oil Bottle Kit
   Oil bottle kit, with mounting rib and cap.

1. Charbroil Masterflame Model Control Knob Set
   Set of 2 control knobs. Fits Masterflame.
2. Patio Caddie Top Lid Handle.
   Charbroil Patio Caddie lid handle. Hardware is not included.
3. Big Easy Gas Control Knob
   Black plastic main gas control knob for the Big Easy. Knob is 2 inches tall and 2-1/2" in diameter at the base of the knob.
4. Millennium Style 17-1/8" Grill Lid Handle
   Large curved black handle with mounting holes measuring 14-1/2" center to center. The handle measures 17-1/8" side to side and stands out from the grill 4".
5. Alpine Style 11-1/2" Lid Handle
   Alpine Lid Handle Replacement Kit. Kit includes mounting screws and gasket. Mounting holes 8-7/8" on center. Dimensions 11-1/2" X 4-1/4".
6. Advantage Series Grill Lid Handle
   Plastic grill lid handle with with molded in mounting studs. Measures 15" in length. Mounting screws are at 14-3/4" center to center.
7. Dome Shaped Control Knob
   Black dome shaped control knob for a variety of Performance and Advantage Series models. Measures 2-3/8" in diameter.
8. Cap Shaped Control Knob
   Black cap shaped control knob for a variety of Performance and Advantage Series models. Measures 2-3/8" in diameter.
9. Advantage and Performace Series Control Knob Bezel
   Control knob bezel with center hole and slotted mounting hole located directly above center. Bezel is 2-7/8" in diameter and accepts 2-3/8" diameter domed or cap shaped knob.
10. Front Avenue Temperature Guage
    Silver temperature guage. Reads 50 - 800 degrees. Includes wing nut for mounting. Measures 2-3/8" in diameter.
11. Electronic Ignition Push Button
    Electronic ignition plastic push button. Inside spring is included.
12. Front Avenue Temperature Guage Bezel
    Temperature guage bezel. Measures 3-1/2" in diameter.
13. Chrome Plastic Control Knob
    Chrome look, plastic control knob. Factory substitute for knob with black plastic detail. Measures 2" in diameter.
14. Propane Grill Regulator End Fitting
    New style Type QCC regulator end fitting. Large black new style coupling nut with 1/2" outside diameter male pipe thread which screws into the regulator.

1. Electric Patio Caddie Thermostat Regulator and Cord
   Electric temperature controller for the electric patio caddie. Please be aware when ordering that this is a non-returnable item.
2. Full Size Propane Tank Adapter Hose
   Adapter hose allows the use of a full size propane bottle to be used with your Grill-2-Go. 6 feet long.
3. Patio Caddie Hose Valve Regulator Assembly
   Patio Caddie Hose Valve Regulator Assembly
4. Propane Grill Regulator End Fitting
   New style Type QCC regulator end fitting. Large black new style coupling nut with 1/2" outside diameter male pipe thread which screws into the regulator.
5. Grill-2-Go Gas Regulator Control Assembly
   Control valve gas regulator assembly for the Thermos Grill-2-Go Model.
6. MF2 Series Hose, Valve and Regulator Assembly Without Sideburner Valve (1999 to current)
   Masterflame MF2 Hose, Valve and Regulator Assembly. Valve spacing 2-3/8" center to center. For 1999 and newer grill models without sideburner accessory.

1. 5000 Series Warming Rack - Bottom Tier
   Swing away warming rack for Charbroil 5000 Series Grills, 20 X 7
2. 6000 Series Warming Rack - Bottom Tier
   Standing legs bend outward and attach through the sides of the grill bottom. Bottom warming rack for 6000 Series models using either single or multi-tiered warming rack systems. Surface dimensions 9" X 21-1/2". Pivot rod length 24-7/8".
3. 7000 Series Warming Rack - Bottom Tier
   Standing legs bend outward and attach through the sides of the grill bottom. Bottom warming rack for 7000 Series models using either single or multi-tiered warming rack systems. Surface dimensions are 10-1/2" X 23-1/2". Pivot rod length 27-1/8".
4. 8000 Series Warming Rack - Bottom Tier
   Standing legs bend outward and attach through the sides of the grill bottom. Bottom warming rack for 8000 Series models using either single or multi-tiered warming rack systems. Surface dimensions 10 1/2" X 26 1/4". Pivot rod length 29-3/4".
5. 9000 Series Warming Rack - Bottom Tier
   Bottom warming rack for 9000 Series models using either single or multi-tiered warming rack systems. Surface dimensions 29-1/4" X 11-7/8". Pivot rod length 32-7/8", standing legs 5-1/2".

1. 7000 Series Dual Warming Rack Set - Top and Bottom Tiers
   7000 Series Dual Warming Rack Set. Top tier surface dimensions are 8-1/2" X 20-3/4" and pivot rod length is 26". Bottom tier surface dimensions are 10-1/2" X 23-1/2" and pivot rod length is 27-1/8".
2. 8000 Series Dual Warming Rack Set - Top and Bottom Tiers
   8000 Series Dual Warming Rack Set. Top tier surface dimensions are 9" X 24" and pivot rod length is 28-3/4". Bottom tier surface dimensions are 10-1/2" X 26-1/4" and pivot rod length is 29-3/4".
3. 9000 Series Dual Warming Rack Set - Top and Bottom Tiers
   9000 Series two tier warming rack set. Bottom dimensions 29-1/4" X 11-7/8". Pivot rod length 32-7/8", standing legs 5-1/2". Top pivot rod length 31-1/2".
4. 6000 Series Dual Warming Rack Set - Top and Bottom Tiers
   6000 Series Dual Warming Rack Set. Top tier surface dimensions are 7-1/2" x 20" and pivot rod length 24-1/4". Bottom tier surface dimensions 9" X 21-1/2". Pivot rod length 24-7/8".

1. 2 Inch Caster Set
   Set of 2 casters. Caster diameter is 2" and stud inserts are splined and measure 1" long and 3/8" in diameter. (Inserts are not included)
2. Portable Cart Wheel (6 Inch)
   Black 6 inch plastic cart wheel. Wheel is measured across the face of the wheel.
3. Patio Caddie Hardware Kit
   Patio Caddie hardware kit
4. Grill-2-Go Fire And Ice Wheel
   Wheel assembly fits Grill-2-Go Fire and Ice model. Wheel measures 7-1/2" in diameter. 2-1/2" Wide. Axle hole is 3/8" in diameter.
5. Grill-2-Go Latch Clasp
   Latch clasp for Grill-2-Go grills.