DCS Grill Parts

DCS (Dynamic Cooking Sytems) Gas Grill Parts
DCS (Dynamic Cooking Sytems) Gas Grill Parts

External appearance may vary between Grill Models

DCS (Dynamic Cooking Sytems) replacement gas grill parts at warehouse discount pricing.

Low prices. Quick, same-day shipping. Order today!

Grillparts.com stocks premium exact-fit DCS gas grill parts at a savings of up to 40% over DCS OEM parts.

DCS (Dynamic Cooking Systems) grills are a built-in favorite for grillers with outdoor kitchens, or portable carts. The creamic rods and holders that come in most DCS grills take a beating and need to be replaced every few years, and burners last approx. 5-6 years. Elevate your outdoor cooking experience by getting your luxury DCS gas grill cooking like new with parts shipped daily from Grillparts.com

We’ve been shipping DCS parts to backyard chefs since 1996.

Scroll down to view our parts listing for your DCS grill and order today.


Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

Burner Components | DCS
Parts for DCS Grills: 20-1/2" X 6-1/4" Rectangular Cast Iron Burner (Replaces OEM Part 210348)
20-1/2" X 6-1/4" Rectangular Cast Iron Burner (Replaces OEM Part 210348)
Item# CIDCS-LG
Rectangular cast iron burner. Burner measures 20-1/2" total length front to back (including shutter extension) X 6-1/4" wide. Fits many 36", 48" DCS and Lynx model grills. Includes air mix shutter mounted as shown. Quality...
This item is sold outSOLD OUT: Expected 5/21/2025
$86.65
View
Parts for DCS Grills: 16" Rectangular Cast Iron Burner
16" Rectangular Cast Iron Burner
Item# CIDCSLX
Rectangular cast iron burner. Burner measures 16" total length front to back (including shutter extension) X 6-1/4" wide. Fits a variety of DCS and LYNX models. Includes air/fuel mixture shutter, mounted as shown. Quality Aftermarket Part.
This item is in stockIn Stock
$70.66
View 
Add
Parts for DCS Grills: 18" Stainless Steel Tube Burner (Replaces OEM Part 213467)
18" Stainless Steel Tube Burner (Replaces OEM Part 213467)
Item# DCST1
Stainless steel tube burner measures 18" tip to tip. Features an ignitor electrode mounting bracket attached (Electrode not included), and adjustable air shutter with spider screen. Burner mounting flange bends up at a 90 degree angle as shown. ...
This item is in stockIn Stock
Retail: $33.70
$20.49
View 
Add
Parts for DCS Grills: 19-1/4" Stainless Steel Tube Burner (Replaces OEM Part 210617P)
19-1/4" Stainless Steel Tube Burner (Replaces OEM Part 210617P)
Item# DCSU1
Heavy duty stainless steel center feed U-shaped tube burner. Measures 19-1/4" total length front to back including the center tube and is 6" wide. Fits a variety of  DCS models and also some Charmglow models. Quality Aftermarket...
This item is in stockIn Stock
Retail: $155.40
$90.25
View 
Add

Burner Shields, Ceramic Rods, Trays, Heat Plates | DCS
Parts for DCS Grills: DCS Slide In Wood Chip Tray
DCS Slide In Wood Chip Tray
Item# 214331
Stainless steel wood chip tray. Measures 21" long X 2-1/2" wide. The length measurement does not include the curled lip that acts as a handle. The dimensions of the handle flange face are 1-11/16" x 3-1/2". NOTE: In some older DCS grills...
This item is in stockIn Stock
Retail: $82.43
$43.99
View 
Add
Parts for DCS Grills: 9-1/2" Ceramic Rods For DCS Grills, Pack Of 9
9-1/2" Ceramic Rods For DCS Grills, Pack Of 9
Item# CR9PK
Nine ceramic radiant rods/tubes for DCS grills. Each tube measures 9-1/2" long. Pack of 9. (Radiant tube holder not included, shown for display purposes only). Made in USA.
This item is in stockIn Stock
$32.50
View 
Add
Parts for DCS Grills: 9-1/2" Ceramic Tube Radiants, Pack of 3.
9-1/2" Ceramic Tube Radiants, Pack of 3.
Item# DCSCT
Ceramic tube radiants 3-pack for DCS grills. Tubes measure 9-1/2" long. Price is per package of three.  Radiant tube holder tray not included, shown for display purposes only.  Also available in 9-pack, see part CR9PK. Made in USA.
This item is in stockIn Stock
Retail: $33.60
$12.95
View 
Add
Parts for DCS Grills: 19" X 9-1/2" DCS Stainless Steel Heat Shield (Replaces OEM Part 213949)
19" X 9-1/2" DCS Stainless Steel Heat Shield (Replaces OEM Part 213949)
Item# DCSHP1
19" X 9-1/2" DCS stainless steel heat shield. Fits models 24, 27DBQR, 36, 36 Series, 36ABQ, 36ABQR, 36ABQAR, 36BQ, 36BQAR, 36BQR, 48, 48 Series, 48BQ, and 48BQR. (Matches to the CIDCS-LG, 20-1/2" cast iron burner). Quality Aftermarket...
This item is in stockIn Stock
$59.00
View 
Add
Parts for DCS Grills: 16-1/2" X 10-5/8" DCS Stainless Steel Heat Shield (Replaces DCS OEM Part 213948)
16-1/2" X 10-5/8" DCS Stainless Steel Heat Shield (Replaces DCS OEM Part 213948)
Item# DCSHP2
16-1/2" X 10-5/8" DCS Stainless Steel Heat Shield. Quality Aftermarket Part.  Replaces DCS  OEM Part 213948. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use. Burner is for display purposes only;...
This item is in stockIn Stock
$59.00
View 
Add
Parts for DCS Grills: 18-5/8" X 9-7/8" DCS Radiant Tube Holder. (Replaces OEM Part 214081P)
18-5/8" X 9-7/8" DCS Radiant Tube Holder. (Replaces OEM Part 214081P)
Item# DCSHP3
Stainless steel radiant tube holder for DCS. Measures 18-5/8" front to back X 9-7/8" wide. This tray holds eighteen 9-1/2" ceramic radiant tubes. (Radiant tubes not included and are shown for display only, for ceramic tubes...
This item is in stockIn Stock
$105.01
View 
Add
Parts for DCS Grills: DCS Radiant Tray With Ceramic Tubes, "Complete Kit" (Replaces OEM Part 214081P With 18 Ceramic Tubes)
DCS Radiant Tray With Ceramic Tubes, "Complete Kit" (Replaces OEM Part 214081P With 18 Ceramic Tubes)
Item# DCSRADIANT-KIT
DCS "Tray and Tube" Complete Kit. Includes one stainless steel holder tray and "18" ceramic tubes. The tray measures 18-5/8" front to back X 9-7/8" wide and each ceramic tube is 9-1/2" long. Fits many DCS...
This item is in stockIn Stock
$135.99
View 
Add

Cooking Grates | DCS
Parts for DCS Grills: 18-1/2" X 12-3/4" Stainless Steel Rod Cooking Grate
18-1/2" X 12-3/4" Stainless Steel Rod Cooking Grate
Item# CG109SS
18-1/2" X 12-3/4" stainless steel cooking grate. Constructed of 5/16" diameter solid stainless steel rod. Sold individually.
This item is in stockIn Stock
$75.10
View 
Add
Parts for DCS Grills: 18-1/2" X 25-1/2" Two Piece Stainless Steel Cooking Grate Set
18-1/2" X 25-1/2" Two Piece Stainless Steel Cooking Grate Set
Item# CG109SS-SET
Two piece stainless steel rod, cooking grate set. Each section measures 18-1/2" front to back X 12-3/4" wide, for a total set width of 25-1/2". Made of 5/16" diameter solid stainless steel rod.
This item is in stockIn Stock
Retail: $202.20
$145.79
View 
Add
Parts for DCS Grills: 20-1/2" X 10-7/16" Stainless Steel Rod Cooking Grate (Replaces OEM Part 212408P)
20-1/2" X 10-7/16" Stainless Steel Rod Cooking Grate (Replaces OEM Part 212408P)
Item# CG79SS4
Stainless steel cooking grate. Measures 20-1/2" front to back X 10-7/16" wide. Made of 5/16" diameter, solid stainless steel rod. Fits DCS 36 and 48 Series as well as many other brands/models. More than one required. Also available in a 3 piece...
This item is in stockIn Stock
$89.99
View 
Add
Parts for DCS Grills: 20-1/2" X 31-5/16" Three Piece Stainless Steel Cooking Grate Set (Replaces 3 of OEM Part 212408P)
20-1/2" X 31-5/16" Three Piece Stainless Steel Cooking Grate Set (Replaces 3 of OEM Part 212408P)
Item# CG79SS4-SET
Three section stainless steel cooking grate set. Made of 5/16" stainless solid rod. Each section measures 20-1/2" front to back X 10-7/16" wide, for a total set width of 31-5/16". Fits DCS 36 and 48 Series as well as many other brands and...
This item is in stockIn Stock
Retail: $481.65
$263.99
View 
Add
Parts for DCS Grills: 19-1/2" X 12-3/4" Single Piece Stainless Steel Cooking Grate (Replaces DCS OEM Part 212427P)
19-1/2" X 12-3/4" Single Piece Stainless Steel Cooking Grate (Replaces DCS OEM Part 212427P)
Item# CG80SS
Single piece, stainless steel cooking grate. Measures 19-1/2" front to back X 12-3/4" wide. Made of 5/16" diameter, solid stainless steel rod. Fits a variety of DCS 27 Series and many other brands/models.  Replaces DCS OEM Part...
This item is in stockIn Stock
$96.98
View 
Add
Parts for DCS Grills: 19-1/2" X 25-1/2" Two Piece Stainless Steel Cooking Grate Set for DCS 27 Series (Replaces Two Of OEM Part 212427P)
19-1/2" X 25-1/2" Two Piece Stainless Steel Cooking Grate Set for DCS 27 Series (Replaces Two Of OEM Part 212427P)
Item# CG80SS-2
Two section cooking grate set, made of 5/16" stainless steel solid rod. Each section measures 19-1/2" front to back X 12-3/4" wide, for a total set width of 25-1/2". Quality Aftermarket Part.  Replaces two of OEM Part 212427P.
This item is in stockIn Stock
Retail: $260.60
$193.99
View 
Add
Parts for DCS Grills: 24-1/8" X 6-5/16" Warming Rack, DCS (Replaces DCS OEM Part 212921)
24-1/8" X 6-5/16" Warming Rack, DCS (Replaces DCS OEM Part 212921)
Item# D2NNM
Stainless steel warming rack. Measures 24-1/8" X 6-5/16". Constructed of 304 grade solid stainless steel rod. Fits DCS model: BGA-26BQN. Quality Aftermarket Part. Replaces DCS OEM Part 212921.
This item is in stockIn Stock
Retail: $89.99
$69.99
View 
Add
Parts for DCS Grills: 31" X 7-3/4" Warming Rack (Replaces DCS OEM Part 214030 and GE Monogram Part 32248-04)
31" X 7-3/4" Warming Rack (Replaces DCS OEM Part 214030 and GE Monogram Part 32248-04)
Item# D2S2J
Stainless steel warming rack. Measures 31" X 7-3/4". Constructed of 304 grade solid stainless steel rod. Fits DCS models: BGA36-BQAR, BGA36-BQARL, BGA36-BQARN, BGB36-BQAR, BGB36-BQARN, BGB48-BQRN, DCS36-BQARN, DCS36D-BQARN, DCS36E-BQARN,...
This item is in stockIn Stock
Retail: $149.99
$88.99
View 
Add

Gas Control Valves | DCS
Parts for DCS Grills: DCS Gas Control Valve (Replaces Part 250072)
DCS Gas Control Valve (Replaces Part 250072)
Item# DCSVLV072
DCS brass gas control valve (for main burners). The valve has a 1-3/16" long control knob stem. This valve fits many BG, BGA and BGB models. . IMPORTANT: Does not come with an orifice. It is recommended to re-use the old orifice. 
This item is in stockIn Stock
Retail: $55.00
$22.99
View 
Add
Parts for DCS Grills: DCS Gas Control Valve with Micro Switch (Replaces Parts 250821 and 250821P)
DCS Gas Control Valve with Micro Switch (Replaces Parts 250821 and 250821P)
Item# DCSVLV821
DCS brass gas control valve with ignition Micro Switch attached (for main burners). The valve has a 7/8" long control knob stem. Spring loaded micro switch features two flat spade terminals for lead wires from the ignition wire harness. This valve fits...
This item is in stockIn Stock
Retail: $58.00
$27.99
View 
Add

Grill Exterior | DCS
Parts for DCS Grills: Gas/Heat Control Knob - Includes Universal Fit Kit
Gas/Heat Control Knob - Includes Universal Fit Kit
Item# 02342
Attractive black and chrome heat/gas Control Knob measures 2-5/16in. (dia. at base). Replaces an existing damaged, worn or broken heat control knob on bbq gas grills. Fit Kit included to secure knob to  6mm or 8mm “D” shaped gas valve stems...
This item is sold outSOLD OUT: Expected 5/26/2025
Retail: $19.55
$10.45
View
Parts for DCS Grills: "Knob" For Rotary Igniter/Spark Generator With "Round" Knob Shaft
"Knob" For Rotary Igniter/Spark Generator With "Round" Knob Shaft
Item# GGK9
Replacement "knob" for manual "rotary" igniter/spark generators with "round" knob shaft. Measures 1-3/4" in diameter and features "molded in" directional arrow graphics.  IMPORTANT: This is the...
This item is in stockIn Stock
$2.98
View 
Add

Ignitor Components | DCS
Parts for DCS Grills: 2-3/4" Igniter Adapter Wire With "Female Round" and "Male Flat Spade" End Fittings
2-3/4" Igniter Adapter Wire With "Female Round" and "Male Flat Spade" End Fittings
Item# 03198
Igniter adapter wire, converts flat female spade end fitting  to "round" end fitting.  Measures 2-3/4" long with female round connection on one end and a flat male spade connection on the other.  Perfect round end fit...
This item is in stockIn Stock
$2.85
View 
Add
Parts for DCS Grills: 47" Wire With Spade Connectors
47" Wire With Spade Connectors
Item# 03610
47" Replacement wire with flat female spade connectors on each end. One end black shrink wrapped and the other with a square plastic protector.
This item is in stockIn Stock
Retail: $10.20
$5.35
View 
Add
Parts for DCS Grills: 20" Igniter Adapter Wire, Female Spade/Male Round
20" Igniter Adapter Wire, Female Spade/Male Round
Item# 03750
20" long igniter adapter wire. Features a "female flat spade" connector fitting on one end and a "male round"connector fitting on the other end.
This item is in stockIn Stock
$2.95
View 
Add
Parts for DCS Grills: Adapter Wire With Male Round And Female Spade Connectors
Adapter Wire With Male Round And Female Spade Connectors
Item# 03751
Igniter adapter wire, converts round female end fitting to "flat" female spade end fitting. Measures 2-3/4" long with male round connector on one end and a flat female spade connector on the other.
This item is in stockIn Stock
$2.44
View 
Add
Parts for DCS Grills: DCS "Left Side" Collector Box and Electrode (Replaces OEM Part 214269)
DCS "Left Side" Collector Box and Electrode (Replaces OEM Part 214269)
Item# DCSIG39
DCS "Left" collector box and electrode with 15" molded in wire.  Fits older DCS models that requre a "left" and "right" collector box.  Features "left side specific" collector box, 90...
This item is in stockIn Stock
Retail: $51.20
$31.20
View 
Add
Parts for DCS Grills: DCS "Right Side" Collector Box and Electrode (Replaces OEM Part 214268)
DCS "Right Side" Collector Box and Electrode (Replaces OEM Part 214268)
Item# DCSIG40
DCS "Right" collector box and electrode with 15" molded in wire.  Fits older DCS models that require a "left" and "right" collector box.   Features "right side specific" collector box, 90...
This item is in stockIn Stock
Retail: $51.20
$31.20
View 
Add
Parts for DCS Grills: "Knob" For Rotary Igniter/Spark Generator With "Round" Knob Shaft
"Knob" For Rotary Igniter/Spark Generator With "Round" Knob Shaft
Item# GGK9
Replacement "knob" for manual "rotary" igniter/spark generators with "round" knob shaft. Measures 1-3/4" in diameter and features "molded in" directional arrow graphics.  IMPORTANT: This is the...
This item is in stockIn Stock
$2.98
View 
Add
Parts for DCS Grills: Electrode And Wire Assembly
Electrode And Wire Assembly
Item# IG-19
Electrode with wire includes wire insulating jacket. The ceramic portion hidden by the insulating wire is 3-3/4" long. Electrode tip is 1-7/8" to the tip where is bends 90 degrees. Wire length is 23-1/2" and terminates to a flat spade connector.
This item is in stockIn Stock
Retail: $13.20
$10.15
View 
Add
Parts for DCS Grills: DCS Enclosed Electrode And Spark Box Assembly Wth 29-1/2" Wire (Replaces DCS OEM Part 211718)
DCS Enclosed Electrode And Spark Box Assembly Wth 29-1/2" Wire (Replaces DCS OEM Part 211718)
Item# IG-33
DCS electrode and enclosed collector/spark box assembly kit, for use with either Rotary Spark Generators or Electronic Ignition Modules (by utilizing the included adapter wire).  The kit includes one stainless steel collector/spark box,...
This item is in stockIn Stock
Retail: $28.10
$18.33
View 
Add
Parts for DCS Grills: 20" Igniter Wire, With 2 Female Flat Spade Connector Ends
20" Igniter Wire, With 2 Female Flat Spade Connector Ends
Item# IG18B
20" igniter wire. Features flat female spade connectors on both ends.
This item is in stockIn Stock
$2.81
View 
Add
Parts for DCS Grills: DCS Enclosed Electrode And Spark Box Assembly, With 41-1/2" Long Wire (use with Electronic Ignition Modules)
DCS Enclosed Electrode And Spark Box Assembly, With 41-1/2" Long Wire (use with Electronic Ignition Modules)
Item# IG33L
DCS main burner ignition electrode with 41-1/2' long wire and enclosed collector/spark box assembly,for use with "electronic ignition modules"..  Extra long wired length enables "reach" for the electrode...
This item is in stockIn Stock
Retail: $28.10
$18.33
View 
Add
Parts for DCS Grills: DCS Bracketed Electrode Assembly
DCS Bracketed Electrode Assembly
Item# IG37B
DCS bracketed electrode assembly. The electrode has a molded in 15 inch wire with round connector and is mounted under the bracket with the electrode tip bent 90 degrees into the spark box. Bracket measures 3" long X 1" wide.
This item is in stockIn Stock
$9.33
View 
Add
Parts for DCS Grills: Igniter Wire - 20in. (Female Spade to Female Round Termination)
Igniter Wire - 20in. (Female Spade to Female Round Termination)
Item# IG7B
20in. Red Igniter Wire with one insulated female Spade terminal on one end, to one insulated female Round terminal on opposite end. What’s Included: (1) 20in. Igniter Wire for Weber Grills and Other Brands that require flat female spade to...
This item is in stockIn Stock
$2.81
View 
Add
Parts for DCS Grills: Six Output DCS Spark Generator and Push Button (Replaces DCS OEM Part 212334P)
Six Output DCS Spark Generator and Push Button (Replaces DCS OEM Part 212334P)
Item# IGEIB12B
DCS Eltec 18351 electronic spark generator and push button. Generator has 9V battery terminals mounted on side. Six output terminals plus two input terminals for the push button are located on the back.  Replaces DCS OEM Part 212334P.
This item is in stockIn Stock
$53.48
View 
Add
Parts for DCS Grills: DCS 4-Outlet 9 Volt Spark Generator With Push Button (Replaces OEM Part 212333P)
DCS 4-Outlet 9 Volt Spark Generator With Push Button (Replaces OEM Part 212333P)
Item# IGEIB14B
DCS Eltec 4-output electronic spark generator and push button. Generator has an enclosure for a 9V battery on the back side. Features four output terminals plus two input terminals for the push button switch.  Replaces DCS OEM Part 212333P.
This item is in stockIn Stock
$44.08
View 
Add
Parts for DCS Grills: Push Button for DCS Ignition Modules
Push Button for DCS Ignition Modules
Item# IGEIB18PB
Remotely located "push button switch" for DCS electronic ignition modules, IGEIB12B and IGEIB14B (sold separately). Features two flat male spade terminals for wire connection to the ignition module. If replacement wires are needed for the push...
This item is in stockIn Stock
$18.51
View 
Add
Parts for DCS Grills: Single Pole Manual "Rotary" Spark Generator And Knob
Single Pole Manual "Rotary" Spark Generator And Knob
Item# UP5B
Single pole(one output terminal), rotary spark generator with knob. Distance, center to center, between the mounting screw holes measures 1-3/8". Mounting hardware, 2 screws, included.
This item is in stockIn Stock
$11.86
View 
Add
Parts for DCS Grills: "AA" Electronic Spark Generator With Two Outputs
"AA" Electronic Spark Generator With Two Outputs
Item# B072218
"AA" electronic igniter spark generator. Includes push button cap, internal battery connection spring and mounting locknut. Features two output terminals on back of the module.  Genuine Broilmaster Part.
This item is in stockIn Stock
Retail: $25.00
$22.50
View 
Add
Parts for DCS Grills: 19in. Wire with 2 Female Flat Spade Terminals (1/8in. to 1/4in.) Replaces OEM Part G4006377
19in. Wire with 2 Female Flat Spade Terminals (1/8in. to 1/4in.) Replaces OEM Part G4006377
Item# VBSJC
19in. long ignition wire with one end being a larger 1/4in. female spade terminal connector, and at the other end a smaller 1/8in. female flat spade terminal connector. Features clear plastic terminal protectors. Used for spark generator to electrode...
This item is in stockIn Stock
Retail: $9.99
$6.49
View 
Add

Random Parts | DCS
Parts for DCS Grills: DCS Slide In Wood Chip Tray
DCS Slide In Wood Chip Tray
Item# 214331
Stainless steel wood chip tray. Measures 21" long X 2-1/2" wide. The length measurement does not include the curled lip that acts as a handle. The dimensions of the handle flange face are 1-11/16" x 3-1/2". NOTE: In some older DCS grills...
This item is in stockIn Stock
Retail: $82.43
$43.99
View 
Add

Regulators and Hoses | DCS
Parts for DCS Grills: Propane Adapter Hose - Stainless Steel Overbraid - (14ft.)
Propane Adapter Hose - Stainless Steel Overbraid - (14ft.)
Item# 100700-168
14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length...
This item is in stockIn Stock
$76.99
View 
Add
Parts for DCS Grills: Quick Connect Fitting - On/Off Ball Valve - 3/8in. Fitting
Quick Connect Fitting - On/Off Ball Valve - 3/8in. Fitting
Item# 104007
3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug...
This item is in stockIn Stock
$32.99
View 
Add
Parts for DCS Grills: Quick Connect Fitting - 3/8in. (For 3/8in. Hose)
Quick Connect Fitting - 3/8in. (For 3/8in. Hose)
Item# 104406
3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a...
This item is in stockIn Stock
$23.34
View 
Add
Parts for DCS Grills: Commercial 2-Stage Regulator - 30in. HD Hose - 3/8in. Fittings
Commercial 2-Stage Regulator - 30in. HD Hose - 3/8in. Fittings
Item# 106238-30
High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of...
This item is in stockIn Stock
$49.99
View 
Add
Parts for DCS Grills: Automatic Gas Timer - Shut Off Valve - (1 to 3hrs.)
Automatic Gas Timer - Shut Off Valve - (1 to 3hrs.)
Item# 3090
Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP). Has...
This item is in stockIn Stock
Retail: $102.00
$91.80
View 
Add
Parts for DCS Grills: Control Knob - For Automatic Gas Timer - (1 to 3hrs.)
Control Knob - For Automatic Gas Timer - (1 to 3hrs.)
Item# 3090-01
Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic...
This item is in stockIn Stock
Retail: $20.00
$18.00
View 
Add
Parts for DCS Grills: Automatic Gas Timer - Shut Off Valve - (20/40/60min.)
Automatic Gas Timer - Shut Off Valve - (20/40/60min.)
Item# 3092
Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane...
This item is in stockIn Stock
Retail: $102.00
$91.80
View 
Add
Parts for DCS Grills: Control Knob - For Automatic Gas Timer - (20/40/60min.)
Control Knob - For Automatic Gas Timer - (20/40/60min.)
Item# 3092-01
Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality...
This item is in stockIn Stock
Retail: $26.00
$23.40
View 
Add
Parts for DCS Grills: Automatic Gas Timer with Stainless Steel Connection Box - (20/40/60min.)
Automatic Gas Timer with Stainless Steel Connection Box - (20/40/60min.)
Item# 5521-11T
Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly. Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and...
This item is in stockIn Stock
Retail: $254.00
$228.60
View 
Add
Parts for DCS Grills: Automatic Gas Timer with Stainless Steel Connection Box - (1 to 3hrs.)
Automatic Gas Timer with Stainless Steel Connection Box - (1 to 3hrs.)
Item# 5521-13T
Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly. Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be...
This item is in stockIn Stock
Retail: $239.00
$215.10
View 
Add
Parts for DCS Grills: Propane Regulator and Single Hose Assy. (40in.)
Propane Regulator and Single Hose Assy. (40in.)
Item# 99281
5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part.  Is your gas...
This item is in stockIn Stock
Retail: $47.99
$40.99
View 
Add
Parts for DCS Grills: Propane Regulator and Dual (2) Hose Assy. (2 x 22in.)
Propane Regulator and Dual (2) Hose Assy. (2 x 22in.)
Item# HR5B
5/16in. ID propane/LP gas hose. 2 (dual) 22 inch length hoses with a brass 3/8in. female hex nut flare connectors, assembled to a single propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Created for gas...
This item is in stockIn Stock
Retail: $60.00
$42.49
View 
Add
Parts for DCS Grills: Propane Regulator and Single Hose Assy. (40in.)
Propane Regulator and Single Hose Assy. (40in.)
Item# HR7B
5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower...
This item is in stockIn Stock
Retail: $43.20
$28.86
View 
Add
Parts for DCS Grills: 3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (12ft.)
3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (12ft.)
Item# NG12
12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering. Quick...
This item is in stockIn Stock
Retail: $86.99
$60.94
View 
Add
Parts for DCS Grills: 3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (14ft.)
3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (14ft.)
Item# NG14
14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering. Quick...
This item is in stockIn Stock
Retail: $93.99
$65.84
View 
Add
Parts for DCS Grills: Convertible Gas Pressure Regulator (Natural Gas | Propane)
Convertible Gas Pressure Regulator (Natural Gas | Propane)
Item# PR-SU
Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily...
This item is in stockIn Stock
$20.59
View 
Add
Parts for DCS Grills: Propane Regulator and Single Hose Assy. (24in.)
Propane Regulator and Single Hose Assy. (24in.)
Item# 65941
5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Replaces #7502 Genuine Weber...
This item is in stockIn Stock
Retail: $45.99
$38.99
View 
Add
Parts for DCS Grills: Propane Hose Protector/Rodent Guard - Stainless Steel - (23in.)
Propane Hose Protector/Rodent Guard - Stainless Steel - (23in.)
Item# RGB
23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose. Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose...
This item is in stockIn Stock
$7.93
View 
Add